AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (2.9 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Publishing Language: Chinese | Open Access

The low-carbon optimization design of rural residential buildings in Xi’an area based on numerical simulation

Meng Zhen1, Jinmin Xie2, Weijie Xia3, Guangmeng Bian4( )
Shaanxi Land Engineering Construction Group Co., Ltd. -Xi’an Jiaotong University, School of Human Settlements and Civil Engineering, Land Engineering and Human Settlements Technology Innovation Center, Xi’an Jiaotong University, Xi’an 710049, China
School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
School of Architecture and Art, Hebei University of Architecture, Zhangjiakou 075000, China
School of Architecture, Tianjin University, Tianjin 300072, China
Show Author Information

Abstract

In rural areas of China, the design of self-built houses varies significantly and lacks scientific rigor. To address the high energy consumption issues of rural residences in the Xi’an region, this study first conducted field tests to obtain structural parameters and thermal performance data of the target house, and then utilized Rhino software for modeling. Next, the Ladybug and Honeybee plugins were applied to simulate the energy consumption and carbon emissions during the house’s operation, followed by optimization of the building’s envelope, including insulation layers, and a comparison of energy consumption before and after optimization. The results indicated that the energy consumption and carbon emissions of the target house during operation were relatively high. However, after optimizing the envelope structure, the heating energy consumption in March decreased from 1.66 kWh/m2 to 1.05 kWh/m2, and carbon emissions dropped from 1.52 kg CO2e to 0.94 kg CO2e. In April, heating energy consumption reduced from 0.30 kWh/m2 to 0.09 kWh/m2, and carbon emissions fell from 0.27 kg CO2e to 0.08 kg CO2e. The optimization significantly reduced the house’s energy consumption and carbon emissions, providing effective strategies for future self-built house designs in Xi’an and similar climate zones.

CLC number: TU241; TU201.5

References

【1】
【1】
 
 
Journal of Northwest University (Natural Science Edition)
Pages 1026-1044

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Zhen M, Xie J, Xia W, et al. The low-carbon optimization design of rural residential buildings in Xi’an area based on numerical simulation. Journal of Northwest University (Natural Science Edition), 2026, 56(5): 1026-1044. https://doi.org/10.16152/j.cnki.xdxbzr.2026-05-006

0

Views

0

Downloads

0

Crossref

0

CSCD

Received: 08 February 2026
Revised: 26 March 2026
Published: 25 October 2026
© The Editorial Department of Journal of Northwest University(Natural Science Edition)2026.

This is an open access article under the CC BY-NC-ND 4.0 license (https://creativecommons.org/licenses/by-nc-nd/4.0/).