AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (3.9 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Publishing Language: Chinese | Open Access

Preparation and performance research of thermocatalytic self-cleaning oven coatings

ChaoRan LIU1,2, ShuangDe LI1,2( ), JiaHua WANG3,4( ), YanQiang HUO3,4, YunFa CHEN1,2( )
State Key Laboratory of Mesoscience and Process Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190
School of Chemical Engineering, University of Chinese Academy of Sciences, Beijing 101408
Healthy & Intelligent Kitchen Engineering Research Center of Zhejiang Province, Ningbo 315336
Ningbo Fotile Kitchen Ware Co., Ltd, Ningbo 315336, China
Show Author Information

Abstract

Oven cooking leads to grease adhesion on inner walls and emission of oil fumes. Cleaning the walls by pyrolysis at 500 ℃ involves high energy consumption and requires long times, which remain significant challenges. A high-performance noble metal catalyst and catalytic self-cleaning coating which enables low-temperature oven self-cleaning was synthesized in this work. Pt/γ-Al2O3 catalysts with 0.2-1.0 wt. %Pt loadings were synthesized via an impregnation method using γ-Al2O3 as the support. The valence state of Pt was regulated by varying the calcination atmosphere. Using toluene as the probe gas, the H2-reduced 0.2Pt/γ-Al2O3-R catalyst demonstrated optimal performance, achieving 90% toluene conversion at 149 ℃. The effects of catalyst type and content on grease decomposition were investigated by comparison of grease weight loss. By optimizing slurry composition and ratios, a uniform catalytic coating was applied to stainless steel substrates using a doctor blade. The effects of varying the coating thickness, catalyst content, and reaction temperature were systematically evaluated, and the results showed that the 0.2Pt/γ-Al2O3-R coating with 150 μm thickness heated at 250 ℃ exhibited the best grease decomposition efficiency.

CLC number: TQ63

References

【1】
【1】
 
 
Journal of Beijing University of Chemical Technology (Natural Science Edition)
Pages 58-68

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
LIU C, LI S, WANG J, et al. Preparation and performance research of thermocatalytic self-cleaning oven coatings. Journal of Beijing University of Chemical Technology (Natural Science Edition), 2026, 53(5): 58-68. https://doi.org/10.13543/j.bhxbzr.2026.05.007

2

Views

0

Downloads

0

Crossref

0

Scopus

0

CSCD

Received: 03 September 2025
Published: 20 September 2026
© 2026 The Authors.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).