AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (1.6 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Publishing Language: Chinese

Unified Elasto-Plastic Solution for Cold Regions Tunnel Considering Damage and Non-Uniform Frost Heave

Wangtao JIANG1, Haiqiang JIANG1, Qinguo MA1( ), Yongdong LI1, Zhiguo LI2
School of Civil Engineering and Transportation/State Key Laboratory of Subtropical Building Science/South China Institute of Geotechnical Engineering, South China University of Technology, Guangzhou 510640, Guangdong, China
China Railway Tunnel Consultants Co., Ltd., Guangzhou 511400, Guangdong, China
Show Author Information

Abstract

The analysis of elasto-plastic solution can provide a basis for the stability research of cold regions tunnel. Therefore, the elasto-plastic damage mechanics calculation model was established by considering the non-uniform frost heave of surrounding rock. The unified analytical solutions of elasto-plastic stress field and displacement field of cold regions tunnel were derived based on the unified strength theory, and the unified solutions were verified and the parameters were analyzed. The results show that, by neglecting plastic damage and volume frost heave ratio of surrounding rock, the elasto-plastic solution of cold regions tunnel tends to be conservative, and the actual frost heave degree of surrounding rock for cold regions tunnel can be more accurately reflected by considering the non-uniform frost heave. In addition, the potential strength of frozen surrounding rock can be effectively improved by considering the intermediate principal stress effect. The radial stress σf of lining and plastic radius rp of tunnel are significantly influenced by parameters such as damage degree ratio λ/Ef, volume frost heaving ratio ξV, coefficient of non-uniform frost heaving k, unified strength theoretical parameter b, initial ground stress p0 and displacement release coefficient η. Hence, the influence of different parameters on tunnel engineering in cold regions should be reasonably analyzed. The research results can provide theoretical reference for engineering design of cold regions tunnel.

CLC number: TU457 Article ID: 1000-565X(2022)01-0069-11

References

【1】
【1】
 
 
Journal of South China University of Technology (Natural Science Edition)
Pages 69-79

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
JIANG W, JIANG H, MA Q, et al. Unified Elasto-Plastic Solution for Cold Regions Tunnel Considering Damage and Non-Uniform Frost Heave. Journal of South China University of Technology (Natural Science Edition), 2022, 50(1): 69-79. https://doi.org/10.12141/j.issn.1000-565X.210133

614

Views

1

Downloads

0

Crossref

0

Web of Science

13

Scopus

7

CSCD

Received: 12 March 2021
Published: 25 January 2022
© Journal of South China University of Technology(Natural Science Edition)