AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (986.5 KB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Publishing Language: Chinese | Open Access

Parametric modeling and application of gravity deepwater cage system

Chengyu WAN1,2, Guoliang PANG2,3( ), Xiaohua HUANG1,2, Dejun FENG1, Gen LI2,3, Taiping YUAN2,3, Yu HU2,3, Qiyou TAO2,3
Zhejiang Ocean University/National Engineering Research Center for Marine Aquaculture, Zhoushan 316000, China
South China Sea Fisheries Research institute, Chinese Academy of Fishery Sciences/Key Laboratory for Sustainable Utilization of Open-Sea Fishery, Ministry of Agriculture and Rural Affairs, Guangzhou 510300, China
Sanya Tropical Fisheries Research institute/Key Laboratory of Efficient Utilization and Processing of Marine Fishery Resources of Hainan Province, Sanya 572000, China
Show Author Information

Abstract

The numerical model of gravity deepwater cage, which is the foundation for the numerical simulation analysis of mechanical characteristics of cage, undertakes the majority of the work in the cage simulation process. In order to solve the problems of tedious modeling and low efficiency in this process, we proposed a parameterized rapid modeling method for gravity deepwater cage. Firstly, each component of the cage was parameterized according to its structural characteristics. Then, the modeling program was compiled and the corresponding operation interface was developed. Finally, the rapid creation of gravity deepwater cage model was achieved in OrcaFlex. Engineering test shows that the program can improve the efficiency of cage modeling greatly and facilitate the engineering calculation of gravity deepwater cages. The study provides references for the model rapid creation and numerical analysis of gravity deepwater cages of various specifications.

CLC number: S 967.3 Document code: A Article ID: 2095-0780-(2024)05-0103-10

References

【1】
【1】
 
 
South China Fisheries Science
Pages 103-112

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
WAN C, PANG G, HUANG X, et al. Parametric modeling and application of gravity deepwater cage system. South China Fisheries Science, 2024, 20(5): 103-112. https://doi.org/10.12131/20240120

0

Views

0

Downloads

0

Crossref

0

Scopus

0

CSCD

Received: 30 May 2024
Revised: 09 August 2024
Published: 05 October 2024
© Editorial Office of South China Fisheries Science.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).