AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (3.8 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Publishing Language: Chinese | Open Access

Design and experimental research on key components of net cleaning equipment for deep-water cage

Taiping YUAN1,2, Yuqi LIAO3, Xiaohua HUANG1,2( ), Yu HU1,2, Qiyou TAO1,2, Gen LI1,2, Guoliang PANG1,2
Tropical Aquaculture Research and Development Center, South China Sea Fisheries Research Institute, Chinese Academy of Fishery Sciences/Sanya Tropical Fisheries Research Institute, Sanya 572000, China
South China Sea Fisheries Research Institute, Chinese Academy of Fishery Sciences/Key Laboratory for Sustainable Utilization of Open-Sea Fishery, Ministry of Agriculture and Rural Affairs/Guangdong Cage Engineering Research Center, Guangzhou 510300, China
Shanghai Ocean University, Shanghai 201306, China
Show Author Information

Abstract

In order to solve the problem of lack of cleaning equipment for large-scale net cage aquaculture in China, we desinged a net cleaning equipment for deep-water cage aquaculture based on the principle of high-pressure jet cavitation. Then we established the hydrodynamic characteristic analysis equation of key components of cleaning equipment by using mathematical modeling and physical experimental methods. Besides, we conducted underwater cleaning experiments to investigate the effects of nozzle diameter, nozzle to rotating discs angle (Angle between nozzle axis and diversion rotary disc surface), and target distance on the biological removal rate of cleaning equipment under different working conditions. The results show that the biological removal rate of fouling on the net hanging board was influenced by multiple factors such as target distance, nozzle diameter and nozzle to rotating discs angle. Within the experimental parameter range, the biological removal rate of fouling on the net cleaning equipment was 30.26%–72.55%. Within the range of test parameters, when the nozzle diameter was 1.0 mm, the nozzle to rotating discs angle was 60°, and the target distance was 0 cm. The removal rate of fouling organisms on the net hanging boards was the highest. The effect of target distance on the removal rate of biofouling on the net hanging boards was the most significant. Under the impact of cavitation jet from net cleaning equipment, shellfish fouling organisms mainly fell off in the form of shell fragmentation. With the main residue being soft shellfish silk discs with strong adsorption capacity. The results optimize the parameter configuration of underwater cleaning equipment, providing theoretical support for the design of net cleaning equipment for cage aquaculture.

CLC number: S 951.3 Document code: A Article ID: 2095-0780-(2024)01-0025-09

References

【1】
【1】
 
 
South China Fisheries Science
Pages 25-33

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
YUAN T, LIAO Y, HUANG X, et al. Design and experimental research on key components of net cleaning equipment for deep-water cage. South China Fisheries Science, 2024, 20(1): 25-33. https://doi.org/10.12131/20230214

4

Views

0

Downloads

0

Crossref

0

Scopus

0

CSCD

Received: 01 November 2023
Revised: 11 December 2023
Published: 05 February 2024
© Editorial Office of South China Fisheries Science.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).