AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (899.9 KB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Basic Study | Publishing Language: Chinese | Open Access

An in vitro evaluation of antibacterial properties of 2 pulp capping materials

Hai-xia LIUXuan CHENLing ZOU( )
State Key Laboratory of Oral Diseases, Department of Conservative Dentistry and Endodontics, West China Hospital of Stomatology, Sichuan University, Chengdu 610041, China
Show Author Information

Abstract

Objective

To evaluate the antimicrobial properties of 2 different pulp capping materials (ProRoot MTA and iRoot BP Plus).

Methods

Modified direct contact test (DCT) was performed as follow. ProRoot MTA and iRoot BP Plus were set for 7 days, then crushed and immersed into deionized water at concentrations of 200 g·L-1 for another 7 days. PH values of the supernatants of the aqueous extracts were measured with a pH meter. The germfree superna-tants were mixed with Streptococcus mutans suspensions and then incubated for 24 hours. The survival of bacteria wasassessed by measuring the optical density (OD) at 600 nm with an automated microplate reader.

Results

PH values ofthe aqueous extracts of ProRoot MTA and iRoot BP Plus were between 12 and 13, and no statistically significant difference was found (t = 0.133, P = 0.899). Both ProRoot MTA and iRoot BP Plus demonstrated good antibacterial properties (P<0.05), and iRoot BP Plus performed a better antibacterial effect (P<0.05).

Conclusion

IRoot BP Plus performed a better antibacterial effect against Streptococcus mutans when compared to ProRoot MTA.

CLC number: R781.05 Document code: A Article ID: 2096-1456(2016)10-578-04

References

【1】
【1】
 
 
Journal of Prevention and Treatment for Stomatological Diseases
Pages 578-581

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
LIU H-x, CHEN X, ZOU L. An in vitro evaluation of antibacterial properties of 2 pulp capping materials. Journal of Prevention and Treatment for Stomatological Diseases, 2016, 24(10): 578-581. https://doi.org/10.12016/j.issn.2096-1456.2016.10.004

279

Views

2

Downloads

0

Crossref

0

Scopus

Received: 13 April 2016
Revised: 15 May 2016
Published: 20 October 2016
© 2016 by Editorial Department of Journal of Prevention and Treatment for Stomatological Diseases