AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (19.6 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Publishing Language: Chinese | Open Access

Study on the effect of Zr-based reactive casing on explosion enhancement and fuel ignition

Ning DU1Shichao REN1Huameng FU2Jinhe WANG2
School of Equipment and Engineering, Shenyang Ligong University, Shenyang 110159, Liaoning, China
Shi-changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, Liaoning, China
Show Author Information

Abstract

To investigate the explosive energy release of Zr-based reactive material (Zr-RM) casings and the ignition effect of fragments driven by the explosion on fuel, casings composed primarily of zirconium (Zr), copper (Cu), nickel (Ni), aluminum (Al), and ytterbium (Y) were fabricated using alloy melting and casting techniques. The casings mentioned above had an outer diameter of 40 mm, a height of 80 mm, and a wall thickness of 5 mm. For comparison of subsequent damage effects, steel casings made of 45 steel with the same dimensions and mass were also prepared. Both types of casings were filled with JH-2 explosive charges. The charged structures were placed on a polyvinyl chloride pipe stand 1.5 m above the ground, and a fuel box containing 2.5 L of gasoline was positioned 2.0 m away from the explosion center. During the explosion-driven tests, a high-speed camera was utilized to capture the formation and propagation of the explosion fireball, the shockwave, and the impact process of casing fragments on the fuel tank. The fireball duration, shockwave velocity, and fragment impact effects were measured and analyzed. Additionally, the ignition and destruction effects of the fragments on the fuel were observed and recorded. The experimental results demonstrate that, when compared to steel casings of equal mass, Zr-RM casings under explosion-driven conditions exhibit a longer duration of firelight and faster shockwave velocities. Specifically, the fireball duration of Zr-RM casings is approximately 25.84 times that of steel casings, and the shockwave velocity is roughly 1.17 times faster. Zr-RM casings exhibit an enhancement effect on air shockwaves under explosion-driven conditions. Fragments of different materials cause structural damage to fuel tanks, including perforation and plastic deformation. After piercing the fuel tank, the reactive material ignites the fuel inside, demonstrating the ability to ignite gasoline. On the contrary, steel casings of equal mass do not ignite the fuel within the tank. This research provides a reference for the application of Zr-RM casing warheads.

CLC number: O381 Document code: A

References

【1】
【1】
 
 
Explosion and Shock Waves

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
DU N, REN S, FU H, et al. Study on the effect of Zr-based reactive casing on explosion enhancement and fuel ignition. Explosion and Shock Waves, 2025, 45(11). https://doi.org/10.11883/bzycj-2024-0252

153

Views

0

Downloads

0

Crossref

0

Web of Science

1

Scopus

1

CSCD

Received: 22 July 2024
Revised: 18 November 2024
Published: 05 November 2025
© 2025 Editorial Office of Explosion and Shock Waves

This is an open access article under the CC BY-NC license (https://creativecommons.org/licenses/by-nc/4.0/)