AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (2.2 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research paper | Publishing Language: Chinese | Open Access

Effect of stretching pre-strain on residual stress and notch fatigue property of FGH96 alloy

Jiaxun LI1, Jingxuan LI2, Huashan SHANG2, Hao WANG2( ), Aixue SHA2, Yong PENG3
Sino-French Engineer School,Nanjing University of Science and Technology,Nanjing 210094,China
Application and Evaluation Center,AECC Beijing Institute of Aeronautical Materials,Beijing 100095,China
School of Materials Science and Engineering,Nanjing University of Science and Technology,Nanjing 210094,China
Show Author Information

Abstract

Tensile pre-deformations at room temperature under loads of 750, 950 MPa and 1150 MPa are conducted for notched specimens of FGH96 powder superalloy with a stress concentration factor of 2.0. The residual stress at the notch root and the notch fatigue property under 550 ℃/700 MPa, and 550 ℃/850 MPa are investigated. The results show that after pre-tension, the residual stress at the notch root surface transitioned from tensile stress to compressive stress. When the pre-tension load increases from 750 MPa to 1150 MPa, the residual stress at the notch root surface increases from 223 MPa to 713 MPa. After pre-tension, the residual compressive stress gradually decays from the notch root surface to the interior. The notch fatigue life significantly increases with the increase of pre-tension load under 550 ℃/700 MPa fatigue load. The mean notch fatigue life after 1150 MPa pre-tension increases by 182% compared to the without pre-tention sample. Under the fatigue load of 550 ℃/850 MPa, the notch fatigue life shows a trend of first increasing and then decreasing with the increase of pre-tension load. The mean notch fatigue life after 1150 MPa pre-tension is basically equivalent to the without pre-tention sample. The relaxation behavior of residual compressive stress introduced by pre-tention during fatigue testing is a key factor determining whether fatigue life can be improved. After pre-tension, the fatigue crack initiation mode transitions from single-source initiation to multi-source initiation at 550 ℃/850 MPa.

CLC number: V252.2 Document code: A Article ID: 1005-5053(2026)11-0028-08

References

【1】
【1】
 
 
Journal of Aeronautical Materials
Pages 28-35

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
LI J, LI J, SHANG H, et al. Effect of stretching pre-strain on residual stress and notch fatigue property of FGH96 alloy. Journal of Aeronautical Materials, 2026, 46(11): 28-35. https://doi.org/10.11868/j.issn.1005-5053.2026.000042

5

Views

0

Downloads

0

Crossref

0

Scopus

0

CSCD

Received: 26 February 2026
Accepted: 10 April 2026
Published: 15 November 2026
© Journal of Aeronautical Materials 2026.

This is an open access article under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).