AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (37.4 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research paper | Publishing Language: Chinese | Open Access

Multiaxial fatigue crack initiation and propagation morphology analysis for 2024-T3 and 7075-T6 aluminum alloys

Xiaolong ZHU1, Jiu WANG1, Hang SU2, Xiaolin ZHANG1, Hu LIU2, Zhengqiang CHENG2( )
AVIC Chengfei Civil Aircraft Co.,Ltd.,Chengdu 610000,China
Advanced Structural Materials Mechanical Behavior and Service Safety Key Laboratory of Sichuan Province,School of Mechanics and Aerospace Engineering,Southwest Jiaotong University,Chengdu 611756,China
Show Author Information

Abstract

Aerospace aluminum alloy structures are subjected to multiaxial fatigue loading during service, and investigating their fatigue behavior is important for structural safety. In this work, cylindrical specimens of 2024-T3 and 7075-T6 aluminum alloys are used to investigate crack initiation and propagation under tension-torsion multiaxial fatigue loading. The mechanical properties are obtained through quasi-static tensile tests, and some specimens are subjected to pretension. Subsequently, tension–torsion multiaxial fatigue tests are performed and crack initiation and propagation are examined using metallographic microscopy and scanning electron microscope. The results show that, under multiaxial fatigue loading, crack propagation in both aluminum alloy specimens is mainly manifested through two mechanisms: single-crack-dominated propagation and multi-crack cooperative propagation. Fatigue fracture may be influenced by the size and spatial distribution of potential fatigue sources. Large surface second-phase particles induce strong stress concentrations, promoting the initiation and rapid propagation of main fatigue cracks, whereas dispersed small second-phase particles trigger the nucleation and interaction of multiple cracks. Pretension accelerates fatigue fracture by introducing initial micro-damage. For 2024-T3, the number of surface microcracks increases, enhancing multi-crack cooperative propagation mechanism, while for 7075-T6, changes are minor, and crack growth is primarily dominated by single-crack-dominated propagation mechanism.

CLC number: V215.5 Document code: A Article ID: 1005-5053(2026)11-0055-14

References

【1】
【1】
 
 
Journal of Aeronautical Materials
Pages 55-68

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
ZHU X, WANG J, SU H, et al. Multiaxial fatigue crack initiation and propagation morphology analysis for 2024-T3 and 7075-T6 aluminum alloys. Journal of Aeronautical Materials, 2026, 46(11): 55-68. https://doi.org/10.11868/j.issn.1005-5053.2026.000023

5

Views

0

Downloads

0

Crossref

0

Scopus

0

CSCD

Received: 05 February 2026
Accepted: 10 April 2026
Published: 15 November 2026
© Journal of Aeronautical Materials 2026.

This is an open access article under the CC BY-NC license (http://creativecommons.org/licenses/by-nc/4.0/).