AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Submit Manuscript
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline

Bias-Compensated Sliding Mode Control for Miniaturized Dual-Tilt Aerial–Ground Robot

Sicheng Zhou* , Xinhang Xu* , Yu Yang* , Shenghai Yuan* , Kexin Guo† ( ), Lihua Xie* ( )
School of Electrical and Electronic Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore
School of Aeronautic Science and Engineering, Beihang University, 37 Xueyuan Road, Haidian District, Beijing 100191, P. R. China

This paper was recommended for publication in its revised form by Special Issues Editors, Jie Chen, Ben M Chen, and Zongli Lin.

Show Author Information

Abstract

Hybrid aerial–ground robots have recently attracted increasing attention for their versatile mobility and adaptability across complex environments. This paper presents a bias-aware estimation and control framework for a miniaturized dual-tilt aerial–ground robot. A complete nonlinear dynamic model is first established, and a bias-linearized allocation structure is derived to reveal the effect of tilt-axis misalignment on the generalized force mapping. Based on this model, servo installation bias is modeled as a matched disturbance in the control allocation. It is estimated by a fixed-time observer and compensated using an integral terminal sliding-mode controller (ITSMC). The controller ensures boundedness and finite-time convergence during estimator transients and under actuator saturation. Simulations based on the full nonlinear model and flight experiments on a 0.86 kg prototype verify the proposed method. Results show that even small installation offsets (on the order of 1°) can cause substantial yaw drift if uncorrected. The proposed observer–controller combination achieves rapid bias compensation and accurate attitude tracking under realistic noise and actuation limits. The overall findings confirm that bias-aware modeling and control are essential for achieving robust and reliable performance in lightweight hybrid aerial–ground systems.

References

【1】
【1】
 
 
Unmanned Systems
Pages 629-642

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Zhou S, Xu X, Yang Y, et al. Bias-Compensated Sliding Mode Control for Miniaturized Dual-Tilt Aerial–Ground Robot. Unmanned Systems, 2026, 14(3): 629-642. https://doi.org/10.1142/S2301385026410116

4

Views

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 31 October 2025
Accepted: 23 March 2026
Published: 17 April 2026
© World Scientific Publishing Company