AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Submit Manuscript
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline

Technical Effectiveness Considerations on the Replacement of Missiles with Interceptor UAVs

Luca Piancastelli( ), Christian Leon-Cardenas, Merve Sali
Department of Industrial Engineering, Alma Mater Studiorum University of Bologna, Viale Risorgimento, 2, Bologna, 40135/Emilia Romagna, Italy

This paper was recommended for publication in its revised form by editorial board member, Ben M. Chen.

Show Author Information

Abstract

The large availability of low-cost, mass-produced drones has shaken the economic and production capabilities of most intermediate-range missile (IRM) systems. IRMs are capable of taking out mortars, rockets, unmanned aerial vehicles (UAVs) and missiles from 4 to 100 km with a unitary cost of the “killer” unit of five figures. The preliminary design of these UAVs may benefit from existing jet models. This study evaluates the cost-effectiveness of these unmanned aerial vehicle interceptors (UAVIs) that can replace the IRMs with reusable small UAVs with booster rockets. This approach reduces the interception costs importantly.

References

【1】
【1】
 
 
Unmanned Systems
Pages 121-136

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Piancastelli L, Leon-Cardenas C, Sali M. Technical Effectiveness Considerations on the Replacement of Missiles with Interceptor UAVs. Unmanned Systems, 2025, 13(1): 121-136. https://doi.org/10.1142/S2301385025500086

2

Views

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 23 February 2023
Revised: 27 May 2023
Accepted: 12 August 2023
Published: 12 October 2023
© World Scientific Publishing Company