AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (2.9 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Paper | Open Access

Meta-silencer with designable timbre

Nengyin Wang1,4, Chengcheng Zhou1,4, Sheng Qiu2, Sibo Huang1,3( ), Bin Jia1, Shanshan Liu1, Junmei Cao1, Zhiling Zhou1, Hua Ding1, Jie Zhu1( ), Yong Li1 ( )
Institute of Acoustics & MOE Key Laboratory of Advanced Micro-Structured Material, School of Physics Science and Engineering, Tongji University, Shanghai 200092, People’s Republic of China
AECC Commercial Aircraft Engine Co., LTD, Shanghai 200240, People’s Republic of China
Department of Electrical Engineering, City University of Hong Kong, Hong Kong, People’s Republic of China

4 These authors contributed equally to this work.

Show Author Information

Abstract

Timbre, as one of the essential elements of sound, plays an important role in determining sound properties, whereas its manipulation has been remaining challenging for passive mechanical systems due to the intrinsic dispersion nature of resonances. Here, we present a meta-silencer supporting intensive mode density as well as highly tunable intrinsic loss and offering a fresh pathway for designable timbre in broadband. Strong global coupling is induced by intensive mode density and delicately modulated with the guidance of the theoretical model, which efficiently suppresses the resonance dispersion and provides desirable frequency-selective wave-manipulation capacity for timbre tuning. As proof-of-concept demonstrations for our design concepts, we propose three meta-silencers with the designing targets of high-efficiency broadband sound attenuation, efficiency-controlled sound attenuation and designable timbre, respectively. The proposed meta-silencers all operate in a broadband frequency range from 500 to 3200 Hz and feature deep-subwavelength sizes around 50 mm. Our work opens up a fundamental avenue to manipulate the timbre with passive resonances-controlled acoustic metamaterials and may inspire the development of novel multifunctional devices in noise-control engineering, impedance engineering, and architectural acoustics.

References

【1】
【1】
 
 
International Journal of Extreme Manufacturing
Pages 025501-025501

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Wang N, Zhou C, Qiu S, et al. Meta-silencer with designable timbre. International Journal of Extreme Manufacturing, 2023, 5(2): 025501. https://doi.org/10.1088/2631-7990/acbd6d

980

Views

6

Downloads

29

Crossref

30

Web of Science

33

Scopus

1

CSCD

Received: 01 October 2022
Revised: 06 November 2022
Accepted: 20 February 2023
Published: 06 March 2023
© 2023 The Author(s).

Original content from this work may be used under the terms of the Creative Commons Attribution 4.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.