AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (1.8 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Paper | Open Access

Nanodot array deposition via single shot laser interference pattern using laser-induced forward transfer

Yoshiki Nakata1 , Eiki Hayashi1, Koji Tsubakimoto1 , Noriaki Miyanaga2 , Aiko Narazaki3 , Tatsuya Shoji4 , Yasuyuki Tsuboi4 
Institute of Laser Engineering, Osaka University, 2-6 Yamadaoka, Suita, Osaka 565-0871, Japan
Institute for Laser Technology, 1-8-4 Utsubo-honmachi, Nishi-ku, Osaka 550-0004, Japan
National Institute of Advanced Industrial Science and Technology, Chuo 2, 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568, Japan
Department of Chemistry, Osaka City University, 3-3-138, Sugimoto, Sumiyoshi-ku, Osaka 558-8585, Japan
Show Author Information

Abstract

Laser-induced forward transfer (LIFT) is a direct-writing technique capable of depositing a single dot smaller than the laser wavelength at small shot energy through the laser-induced dot transfer (LIDT) technique. To deposit a single nanodot in a single shot of laser irradiation, a liquid nanodrop is transferred from donor to receiver and finally solidified via a solid–liquid–solid (SLS) process. In conventional LIDT experiments, multi-shots with step scanning have been used to form array structures. However, interference laser processing can achieve an arrayed process and generate a periodic structure in a single shot. In this study, a femtosecond laser interference pattern was first applied to LIDT, and an array of nanodots was successfully deposited in a single shot, producing the following unit structures: a single dot, adjoining dots, and stacking dots. The diameter of the smallest nanodot was 355 nm, and the narrowest gap between two adjoining nanodots was 17.2 nm. The LIDT technique produces high-purity, catalyst-free that do not require post-cleaning or alignment processes. Given these significant advantages, LIDT can expand the usability of nanodots in a wide range of fields.

References

【1】
【1】
 
 
International Journal of Extreme Manufacturing
Pages 025101-025101

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Nakata Y, Hayashi E, Tsubakimoto K, et al. Nanodot array deposition via single shot laser interference pattern using laser-induced forward transfer. International Journal of Extreme Manufacturing, 2020, 2(2): 025101. https://doi.org/10.1088/2631-7990/ab88bf

839

Views

13

Downloads

26

Crossref

N/A

Web of Science

28

Scopus

0

CSCD

Received: 20 January 2020
Revised: 26 March 2020
Accepted: 13 April 2020
Published: 14 May 2020
© 2020 The Author(s).

Original content from this work may be used under the terms of the Creative Commons Attribution 3.0 licence. Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI.