AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (3 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline

Field Measurement and Analysis of the Mechanical Response of Asphalt Pavement with Flexible Base Layer in Service

Liyuan Liu1,2( )Huailei Cheng1Xiao Zhang3Duijia Zhao4Lifei Xu2
Key Laboratory of Road and Traffic Engineering of the Ministry of Education, Tongji University, Shanghai 201804, China
Shanxi Yellow River Frontier Materials Research Institute Co., Ltd., Taiyuan Shanxi 030000, China
College of Civil Engineering, Taiyuan University of Technology, Taiyuan Shanxi 030024, China
Key Laboratory of Highway Construction and Maintenance Technology of Ministry of Transport in Loess Region, Taiyuan Shanxi 030006, China
Show Author Information

Abstract

The mechanical response of asphalt layer of asphalt pavement is an essential parameter for pavement design. An accurate characterization of the mechanical response of the in-situ asphalt layer is of great significance to improve the reliability of pavement design. The strain data of the service flexible asphalt pavement were collected by field vehicular loading tests. The characteristics of strain waveforms and the strain values under various loading conditions including different axle loads, vehicular speeds and temperatures were investigated by the statistical approach. The results show that the strain waveforms at the bottom of the asphalt layer are significantly influenced by the loading position of the tire. The axle load, temperature and vehicular speed all have significant effects on the strains at the bottom of asphalt layer, but do not significantly change the strain waveform shapes. The increase in the axle load/temperature or the decrease in the vehicular speed all leads to an overall increase in the peak-to-peak strains values of transverse and longitudinal strain pulses. Compared with the waveforms at the bottom of the asphalt layer, the strain response waveforms at the bottom of the ATB layer show significantly viscous behaviors. The interaction of two factors, axle load and temperature, on the mechanical response of the pavement is obvious. The effect of axle load on the extreme values of horizontal-vertical strains at different temperatures was shown to be significantly different. The interaction between vehicle speed, axle load and temperature was not significant. In addition, the model for describing the relationships among strains, vehicular speed, axle load and temperature are established, to predict the strain values under various loading conditions. The research findings are helpful to evaluate the real stress state of flexible pavement asphalt layer, and provide reference data for the design of flexible pavement in China.

References

【1】
【1】
 
 
Journal of Highway and Transportation Research and Development (English Edition)
Pages 15-27

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Liu L, Cheng H, Zhang X, et al. Field Measurement and Analysis of the Mechanical Response of Asphalt Pavement with Flexible Base Layer in Service. Journal of Highway and Transportation Research and Development (English Edition), 2022, 16(2): 15-27. https://doi.org/10.1061/JHTRCQ.0000818

6

Views

1

Downloads

0

Crossref

Received: 07 April 2022
Published: 01 June 2022
© The Editorial Office of Journal of Highway and Transportation Research and Development (English Edition)