AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (4.2 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Original Article | Open Access

An injectable self-adaptive polymer as a drug carrier for the treatment of nontraumatic early-stage osteonecrosis of the femoral head

Ning Kong1 , Hang Yang2, Run Tian1, Guanzhi Liu1, Yiyang Li1, Huanshuai Guan1, Qilu Wei1, Xueshan Du3, Yutian Lei1, Zhe Li1, Ruomu Cao1, Yiwei Zhao1, Xiaohui Wang4, Kunzheng Wang1( ), Pei Yang1 ( )
Department of Bone and Joint Surgery, Second Affiliated Hospital of Xi’an Jiaotong University, No. 157 Xiwu Road, Xi’an 710004, China
Harvard John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02138, USA
Department of Dermatology, Second Affiliated Hospital of Xi’an Jiaotong University, No. 157 Xiwu Road, Xi’an 710004, China
Department of Spine Surgery, Honghui Hospital of Xi’an Jiaotong University, No. 555 Youyi East Road, Xi’an 710000, China

These authors contributed equally: Ning Kong, Hang Yang, Run Tian

Show Author Information

Abstract

Core decompression (CD) with the elimination of osteonecrotic bone is the most common strategy for treating early-stage nontraumatic osteonecrosis of the femoral head (ONFH). Adjuvant treatments are widely used in combination with CD as suitable methods of therapy. Existing augmentations have to be fabricated in advance. Here, we report a novel injectable glycerin-modified polycaprolactone (GPCL) that can adapt to the shape of the CD cavity. GPCL shows great flowability at 52.6 ℃. After solidification, its compressive modulus was 120 kPa at body temperature (37 ℃). This excellent characteristic enables the polymer to provide mechanical support in vivo. In addition, GPCL acts as a carrier of the therapeutic agent zoledronic acid (ZA), demonstrating sustained release into the CD region. ZA-loaded GPCL was injected into ONFH lesions to treat early-stage nontraumatic cases. Compared to that in the CD group, CD+ZA-loaded GPCL injection preserved bone density and increased the collagen level in the femoral head. At the interface between the GPCL and CD tunnel wall, osteogenesis was significantly promoted. In addition, morphological evaluations revealed that the femoral heads in the CD+ZA-GPCL group exhibited improved pressure resistance. These results suggest a strategy effective to preserve the bone density of the femoral head, thus decreasing the possibility of femoral head collapse. This novel injectable polymer has, therefore, considerable potential in clinical applications.

References

【1】
【1】
 
 
Bone Research
Article number: 28

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Kong N, Yang H, Tian R, et al. An injectable self-adaptive polymer as a drug carrier for the treatment of nontraumatic early-stage osteonecrosis of the femoral head. Bone Research, 2022, 10: 28. https://doi.org/10.1038/s41413-022-00196-y

601

Views

8

Downloads

32

Crossref

33

Web of Science

33

Scopus

0

CSCD

Received: 15 July 2021
Revised: 16 November 2021
Accepted: 22 December 2021
Published: 12 March 2022
© The Author(s) 2022

This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.