AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
PDF (23.2 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Tribological behaviors of AZ91D magnesium alloy under the lubrication of oil suspended synthetic magnesium silicate hydroxide nanotubes

Y.L. YinaH.L. Yua( )H.M. WangaX.C. Jib( )Z.Y. SongaX.Y. ZhouaM. WeibP.J. ShibW. ZhangbC.F. Zhaoc( )
National Key Laboratory for Remanufacturing, Army Academy of Armored Forces, Beijing 100072, PR China
School of Mechatronic Engineering and Automation, Foshan University, Foshan 528225, PR China
Training Center, Army Academy of Armored Forces, Beijing 100072, PR China
Show Author Information

Abstract

Efficient lubrication of magnesium alloys is a highly challenging topic in the field of tribology. In this study, magnesium silicate hydroxide (MSH) nanotubes with serpentine structures were synthesized. The tribological behavior of AZ91D magnesium alloy rubbed against GCr15 steel was studied under lubricating oil with surface-modified MSH nanotubes as additives. The effects of the concentration, applied load, and reciprocating frequency on the friction and wear of the AZ91D alloy were studied using an SRV-4 sliding wear tester. Results show a decrease of 18.7–68.5% in friction coefficient, and a reduction of 19.4–54.3% in wear volume of magnesium alloy can be achieved by applying the synthetic serpentine additive under different conditions. A suspension containing 0.3 wt.% MSH was most efficient in reducing wear and friction. High frequency and medium load were more conducive to improving the tribological properties of magnesium alloys. A series of beneficial physical and chemical processes occurring at the AZ91D alloy/steel interface can be used to explain friction and wear reduction based on the characterization of the morphology, chemical composition, chemical state, microstructure, and nanomechanical properties of the worn surface. The synthetic MSH, with serpentine structure and nanotube morphology, possesses excellent adsorbability, high chemical activity, and good self-lubrication and catalytic activity. Therefore, physical polishing, tribochemical reactions, and physical-chemical depositions can occur easily on the sliding contacts. A dense tribolayer with a complex composition and composite structure was formed on the worn surface. Its high hardness, good toughness and plasticity, and prominent lubricity resulted in the improvement of friction and wear, making the synthetic MSH a promising efficient oil additive for magnesium alloys under boundary and mixed lubrication.

References

【1】
【1】
 
 
Journal of Magnesium and Alloys
Pages 379-397

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
Yin Y, Yu H, Wang H, et al. Tribological behaviors of AZ91D magnesium alloy under the lubrication of oil suspended synthetic magnesium silicate hydroxide nanotubes. Journal of Magnesium and Alloys, 2025, 13(1): 379-397. https://doi.org/10.1016/j.jma.2024.01.007

111

Views

0

Downloads

22

Crossref

19

Web of Science

21

Scopus

1

CSCD

Received: 28 June 2023
Revised: 06 December 2023
Accepted: 02 January 2024
Published: 19 February 2024
© 2024 Chongqing University.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/) Peer review under responsibility of Chongqing University