Discover the SciOpen Platform and Achieve Your Research Goals with Ease.
Search articles, authors, keywords, DOI, etc.
I1 stacking faults (SFs) in Mg alloys are regarded as the nucleation sites of 〈c+a〉 dislocations that are critical for these alloys to achieve high ductility. Previously it was proposed that the formation of I1 SFs requires the accumulations of a large number of vacancies, which are difficult to achieve at low temperatures. In this study, molecular dynamics (MD) and molecular statics (MS) simulations based on empirical interatomic potentials were applied to investigate the deformation defect evolutions from the symmetric tilt grain boundaries (GBs) in Mg and Mg-Y alloys under external loading along 〈c〉-axis. The results show the planar faults (PFs) on Pyramidal I planes first appear due to the nucleation and glide of
This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/) Peer review under responsibility of Chongqing University
Comments on this article