Mg-3Al-1Zn alloy deformed along different strain paths: Role of latent hardening

The mechanical properties of magnesium alloy AZ31 were investigated experimentally with visco-plastic self-consistent modeling. Tension, compression and plane strain compression (PSC) tests were performed along 3 directions of a hot rolled plate, and the material parameters input in the model were fitted with the uniaxial stress-strain curves. The critical resolved shear stress (CRSS) for tension twinning was modeled with a modified Voce hardening law first decreasing, and then increasing with strain, that could reproduce better the flow stress for twin-predominant deformation. Such CRSS evolution may better model twin nucleation, propagation and growth. Firstly simulations were carried out assuming latent hardening coefficients for slip by other slip systems equal to self-hardening. Then different heterogeneous latent hardening were used, whose values were based on dislocation dynamics simulations from the literature. This study shows that equal self and latent hardening can reproduce the stress strain curves and plastic anisotropy as well as heterogeneous mode on mode latent hardening. Discrepancies between simulations and experimental results from PSC are explained by an under-estimation of twinning for some PSC strain paths.