AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Open Access

Micro-mechanical damage simulation of 2.5D woven variable thickness composites

Nan WANGa,b( ), Haitao CUIb,c, Hongjian ZHANGb,c( ), Yaoming FUa, Gangjin HUANGa, Shuangqi LYUa
College of Aviation Engineering, Civil Aviation Flight University of China, Guanghan 618307, China
College of Energy and Power Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing 210016, China

Peer review under responsibility of Editorial Committee of CJA

Show Author Information

Abstract

With the application of 2.5D Woven Variable Thickness Composites (2.5DWVTC) in aviation and other fields, the issue of strength failure in this composite type has become a focal point. First, a three-step modeling approach is proposed to rapidly construct full-scale meso-finite element models for Outer Reduction Yarn Woven Composites (ORYWC) and Inner Reduction Yarn Woven Composites (IRYWC). Then, six independent damage variables are identified: yarn fiber tension/compression, yarn matrix tension/compression, and resin matrix tension/compression. These variables are utilized to establish the constitutive equation of woven composites, considering the coupling effects of microscopic damage. Finally, combined with the Hashin failure criterion and von Mises failure criterion, the strength prediction model is implemented in ANSYS using APDL language to simulate the strength failure process of 2.5DWVTC. The results show that the predicted stiffness and strength values of various parts of ORYWC and IRYWC are in good agreement with the relevant test results.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
WANG N, CUI H, ZHANG H, et al. Micro-mechanical damage simulation of 2.5D woven variable thickness composites. Chinese Journal of Aeronautics, 2025, 38(7). https://doi.org/10.1016/j.cja.2025.103522

4

Views

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 28 May 2024
Revised: 18 June 2024
Accepted: 21 August 2024
Published: 03 April 2025
© 2025 The Author(s). Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).