AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Open Access

Thermal-shock-induced failure in brazed joints between SiCf/SiC composites and GH536 superalloy: Phase transition and oxygen intrusion

Shuai ZHAOa, Peng WANGa, Xin NAIa, Haiyan CHENa,b( ), Yongsheng LIUa, Pengcheng WANGa,b( ), Xiaoguo SONGc, Wenya LIa,b
School of Materials Science and Engineering, State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China
Shaanxi Key Laboratory of Friction Welding Technologies, Northwestern Polytechnical University, Xi’an 710072, China
State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China

Peer review under responsibility of Editorial Committee of CJA

Show Author Information

Abstract

The investigation evaluated the thermal shock resistance and failure mechanisms of three brazed joints when exposed to 780 ℃. During exposure, oxidation of the SiCf/SiC composite leads to the formation of SiO2. Residual oxygen will penetrate the high-entropy alloy while retaining its Face-Centered Cubic (FCC) structure. Additionally, the FCC Cr23C6 phase adjacent to the composite reacted with SiC, producing hexagonal Cr2C, compromising the ability of joint to withstand plastic deformation. Moreover, the presence of Nb (s, s) and significant MoNiSi phases induced a gradual alteration in the Coefficient of Thermal Expansion (CTE), facilitating the initiation of shear fractures from the composites towards the central region of the seam, significantly affecting the overall structural integrity and failure behavior of the joint under thermal shock conditions. With an increase in the number of thermal shocks, the shear strength of joint gradually decreases, reaching a maximum of 22.36 MPa after 30 thermal shocks, surpassing that of some joints using glass fillers.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
ZHAO S, WANG P, NAI X, et al. Thermal-shock-induced failure in brazed joints between SiCf/SiC composites and GH536 superalloy: Phase transition and oxygen intrusion. Chinese Journal of Aeronautics, 2025, 38(7). https://doi.org/10.1016/j.cja.2025.103521

3

Views

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 26 May 2024
Revised: 26 June 2024
Accepted: 16 August 2024
Published: 29 March 2025
© 2025 The Author(s). Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).