AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Open Access

A panoramic aerodynamic performance prediction method for turbomachinery cascades using transformer-enhanced neural operator

Qineng WANGa, Zhendong GUOa, Liming SONGa( ), Tianyuan LIUb,c( )
Institute of Turbomachinery, Xi’an Jiaotong University, Xi’an 710049, China
ENN Science and Technology Development China Co., Ltd., Langfang 065001, China
Hebei Key Laboratory of Compact Fusion, Langfang 065001, China

☆ Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

To enable flexible and rapid aerodynamic performance evaluation in turbomachinery design, this paper proposes a panoramic performance prediction framework. Unlike most previous prediction models that directly predict the objective functions of interest, the approach first predicts the basic parameters of the Navier–Stokes equations, such as temperature, pressure, and density. Utilizing these basic physical quantities, it subsequently predicts key performance parameters of the turbine stage meridian plane. By adopting this methodology, the proposed panoramic performance prediction framework functions similarly to a CFD simulator, capable of predicting various objective of interest to the designers. To enhance prediction accuracy, a Transformer-enhanced Neural Operator (TNO) is introduced within this framework. Using the Rotor 37 blades as a reference, the proposed TNO is trained to predict the performance of a transonic compressor blade in the meridian plane. The TNO can accurately predict total quantities such as isentropic efficiency, mass flow, and distributions of total pressure ratio. Remarkably, the prediction error of TNO is observed to be smaller than that of state-of-the-art deep learning operators such as the Fourier Neural Operator(FNO) network and Deep Operator Network(DeepONet). Furthermore, the TNO is applied to downstream tasks, including sensitivity analysis and optimization of various objective functions. The results confirm that the TNO can operate almost like a CFD simulator, while reducing the computational cost of downstream tasks by four orders of magnitude. The effectiveness and reliability of the proposed TNO for solving different kinds of downstream tasks have been well demonstrated.

Electronic Supplementary Material

Download File(s)
cja-38-7-103473_ESM.pdf (6.2 MB)

References

【1】
【1】
 
 
Chinese Journal of Aeronautics

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
WANG Q, GUO Z, SONG L, et al. A panoramic aerodynamic performance prediction method for turbomachinery cascades using transformer-enhanced neural operator. Chinese Journal of Aeronautics, 2025, 38(7). https://doi.org/10.1016/j.cja.2025.103473

2

Views

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 17 June 2024
Revised: 11 August 2024
Accepted: 09 October 2024
Published: 10 March 2025
© 2025 The Author(s). Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).