AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Improving machinability and inhibiting surface damage of SiC wafer by ion implantation modification

Qiang KANGa,b,c,d, Xianguang KONGa,b( ), Jiantao CHANGa,b, Xudong FANGc,d, Chen WUc,d, Changsheng LIc,d
State Key Laboratory of Electromechanical Integrated Manufacturing of High-Performance Electronic Equipments, Xidian University, Xi’an 710071, China
School of Mechano-Electronic Engineering, Xidian University, Xi’an 710071, China
State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an 710049, China
School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an 710049, China

Peer review under responsibility of Editorial Committee of CJA

Show Author Information

Abstract

Silicon Carbide (SiC) wafers have been widely used in micro- and nano-devices due to their excellent optical and material properties. However, polishing SiC wafers has been challenging and inefficient, tending to cause significant surface crack and subsurface damage. This work proposed modifying SiC surface properties by ion implantation to improve machining efficiency, suppress surface crack, and reduce damage. High-energy ion implantation disrupted the SiC crystal lattice, reducing hardness and elastic modulus while increasing brittle-ductile transition depth, thus changing the removal mode from brittle fracture to plastic removal. Theoretical models of material removal rate and surface roughness were established for abrasive polishing of the SiC wafers. Polishing experiments were conducted on ion-implanted, modified SiC samples. The improvement mechanisms of ion implantation on surface damage, removal rate, morphology, and residual stress were investigated. The effect of ion implantation on the polished surface quality of SiC was investigated through orthogonal experiments. The results showed that ion implantation can significantly improve the average material removal rate of the SiC samples. Additionally, the ion-implanted samples had exhibited remarkable reductions in surface roughness, surface damage, and tensile residual stress.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
KANG Q, KONG X, CHANG J, et al. Improving machinability and inhibiting surface damage of SiC wafer by ion implantation modification. Chinese Journal of Aeronautics, 2025, 38(3). https://doi.org/10.1016/j.cja.2024.103394

1465

Views

12

Crossref

10

Web of Science

11

Scopus

0

CSCD

Received: 23 January 2024
Revised: 25 April 2024
Accepted: 06 June 2024
Published: 04 January 2025
© 2024 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).