AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Progressive fatigue damage modelling and life prediction of 3D four-directional braided composite I-beam under four-point flexure spectrum loading

Dong LI, Junjiang XIONG( )
School of Transportation Science and Engineering, Beihang University, Beijing 100191, China

☆ Special Issue: Excellent Papers of AFC and ADAC.

Peer review under responsibility of Editorial Committee of CJA

Show Author Information

Abstract

This paper aims to experimentally and numerically probe fatigue behaviours and lifetimes of 3D4D (three-dimensional four-directional) braided composite I-beam under four-point flexure spectrum loading. New fatigue damage models of fibre yarn, matrix and fibre–matrix interface are proposed, and fatigue failure criteria and PFDA (Progressive Fatigue Damage Algorithm) are thus presented for meso-scale fatigue damage modelling of 3D4D braided composite I-beam. To validate the aforementioned model and algorithm, fatigue tests are conducted on the 3D4D braided composite I-beam under four-point flexure spectrum loading, and fatigue failure mechanisms are analyzed and discussed. Novel global–local FE (Finite Element) model based on the PFDA is generated for modelling progressive fatigue failure process and predicting fatigue life of 3D4D braided composite I-beam under four-point flexure spectrum loading. Good agreement has been achieved between experimental results and predictions, demonstrating the effective usage of new model. It is shown that matrix cracking and interfacial debonding initially initiates on top surface of top flange of I-beam, and then gradually propagates from the side surface of top flange to the intermediate web along the braiding angle, and considerable fiber breakage finally causes final fatigue failure of I-beam.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
LI D, XIONG J. Progressive fatigue damage modelling and life prediction of 3D four-directional braided composite I-beam under four-point flexure spectrum loading. Chinese Journal of Aeronautics, 2025, 38(3). https://doi.org/10.1016/j.cja.2024.103389

752

Views

23

Crossref

25

Web of Science

24

Scopus

0

CSCD

Received: 11 June 2024
Revised: 04 August 2024
Accepted: 14 October 2024
Published: 02 January 2025
© 2024 The Author(s). Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).