AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Open Access

Acceleration of sheet metal spinning simulation by multi-mesh method

Zhuolei ZHAI, Mei ZHAN( ), Zhipeng SHI, Yunda DONG, Xiaoguang FAN
Shaanxi Key Laboratory of High‑Performance Precision Forming Technology and Equipment, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi’an 710072, China

Peer review under responsibility of Editorial Committee of CJA

Show Author Information

Abstract

Sheet metal spinning is an incremental forming process for producing axisymmetric thin-walled parts through continuous local deformation under the action of rollers. While studying the spinning process by finite element (FE) method, a critical bottleneck is the enormous simulation time. For beating off this challenge, a novel multi-mesh method is developed. The method can dynamically track the movement of rollers and adaptively refine the mesh. Thus, a locally refined quadrilateral computation mesh can be generated in the locally-deforming zone and reduce the unnecessary fine elements outside the locally-deforming zone. In the multi-mesh system, the fine elements and coarse elements are extracted from a storage mesh and a background mesh, respectively. Meanwhile, the hanging nodes in the locally refined mesh are removed by designing 4-refinement templates. Between computation mesh and storage mesh, a bi-cubic parametric surface fitting algorithm and accurate remapping methods are conducted to transmit geometric information and physical fields. The proposed method has been verified by two spinning processes. The results suggest that the method can save time by up to about 67% with satisfactory accuracy, especially for distributions of thickness and strain compared with the fully refined mesh.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
ZHAI Z, ZHAN M, SHI Z, et al. Acceleration of sheet metal spinning simulation by multi-mesh method. Chinese Journal of Aeronautics, 2025, 38(7). https://doi.org/10.1016/j.cja.2024.09.027

2

Views

0

Crossref

0

Web of Science

0

Scopus

0

CSCD

Received: 29 May 2024
Revised: 11 June 2024
Accepted: 08 September 2024
Published: 24 September 2024
© 2024 Chinese Society of Aeronautics and Astronautics

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).