AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Investigation on ignition characteristics of charring conductive polymers stimulated by electric energy

Zhiyuan ZHANGa, Hanyu DENGa, Wenhe LIAOa( ), Yantao PUa, Ping CAOb
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
Anhui Hongxing Electrical Polytron Technologies Inc., Hefei 231135, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

The arc ignition based on charring conductive polymers has advantages of simple structure, low ignition power consumption and restart capacity, which bringing it broadly application prospect in hybrid propulsion system of micro/nano satellite. In order to optimize the performance of arc ignition system, it is essential to have a deeper understanding of the ignition processes and ignition characteristics of charring conductive polymers. In this paper, the thermal decomposition, electrical conductivity and thermal conductivity characteristics of charring conductive polymers with different conductive additives and matrix materials were comprehensively evaluated. An experimental investigation was conducted to determine the ignition behaviors and characteristics of different charring conductive polymers in a visual ignition combustor. The experiment result showed that the ignition delay and external energy required for ignition are negatively correlated with voltage and initial temperature of the ignition grain, but positively correlated with oxidizer flow velocity. Compared with charring conductive polymers containing multi-walled carbon nanotube, the ignition delay of charring conductive polymers with carbon black is significantly higher and the pyrolysis time is relatively longer. However, the ignition and initial flame propagation of charring conductive polymers with carbon black is more violent and more inclined to carbon particle ignition. Finally, the restart characteristic of different charring conductive polymers was studied. The ignition delay and external energy required for ignition of different charring conductive polymers all reduced with the increasing of the number of ignitions. However, the ignition characteristics would not change a lot after repeated ignition.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 68-82

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
ZHANG Z, DENG H, LIAO W, et al. Investigation on ignition characteristics of charring conductive polymers stimulated by electric energy. Chinese Journal of Aeronautics, 2024, 37(10): 68-82. https://doi.org/10.1016/j.cja.2024.07.006

596

Views

6

Crossref

5

Web of Science

7

Scopus

0

CSCD

Received: 23 October 2023
Revised: 12 December 2023
Accepted: 11 February 2024
Published: 05 July 2024
© 2024 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).