AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Laser ablation mechanism and performance of glass fiber-reinforced phenolic composites: An experimental study and dual-scale modelling

Ran BIa,b, Pengfei SHENc, Longyu ZHUa,b, Zhengzheng MAc, Chuyang LUOa,b( ), Yongfeng LIa, Lijian PANa
Shanghai Key Laboratory of Lightweight Composite, Donghua University, Shanghai 201620, China
Shanghai High Performance Fibers and Composites Center (Province-Ministry Joint), Center for Civil Aviation Composites, Donghua University, Shanghai 201620, China
AVIC Composite Corporation Ltd, Beijing 101300, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

Both experimental and simulation approaches were employed to investigate the laser ablation mechanism and performances of Glass Fiber Reinforced Phenolic Composites (GFRP). During the ablation process, the difference in thermal conductivities of the glass fibers and the resin matrix as well as their discrepant physical and chemical reactions form a conical ablation morphology. The formation of a residual carbon layer effectively mitigates the ablation rate in the thickness direction. A higher power density results in a faster ablation rate, while a longer irradiation time leads to a larger ablation pit diameter. To account for the variation in thermal conductivity between the fiber and resin, a macro-mesoscale model was developed to differentiate the matrix from the fiber components. Finite element analysis revealed that laser irradiation leads to phenolic decomposition, glass fiber melting vaporization, and residual carbon skeleton evaporation. The dual-scale model exhibits precise prediction capabilities concerning the laser ablation process of GFRP, and its accuracy is confirmed through the comparison of simulation and experimental results for the GFRP laser ablation process. This model provides a feasible method for performance evaluation and lifetime prediction of GFRP subjected to continuous wave laser irradiation.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 470-485

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
BI R, SHEN P, ZHU L, et al. Laser ablation mechanism and performance of glass fiber-reinforced phenolic composites: An experimental study and dual-scale modelling. Chinese Journal of Aeronautics, 2024, 37(8): 470-485. https://doi.org/10.1016/j.cja.2024.05.042

1937

Views

23

Crossref

21

Web of Science

21

Scopus

3

CSCD

Received: 22 August 2023
Revised: 15 September 2023
Accepted: 11 March 2024
Published: 03 June 2024
© 2024 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).