Primary investigation on Ram-Rotor Detonation Engine

The study presents a new type of detonation engine called the Ram-Rotor Detonation Engine (RRDE), which overcomes some of the drawbacks of conventional detonation engines such as pulsed detonation engines, oblique detonation engines, and rotating detonation engines. The RRDE organizes the processes of reactant compression, detonation combustion, and burned gas expansion in a single rotor, allowing it to achieve an ideal detonation cycle under a wide range of inlet Mach numbers, thus significantly improving the total pressure gain of the propulsion system. The feasibility and performance of RRDE are discussed through theoretical analysis and numerical simulations. The theoretical analysis indicates that the performance of the RRDE is mainly related to the inlet velocity, the rotor rim velocity, and the equivalence ratio of reactant. Increasing the inlet velocity leads to a decrease in the total pressure gain of the RRDE. Once the inlet velocity exceeds the critical value, the engine cannot achieve positive total pressure gain. Increasing the rim velocity can improve the total pressure gain and the thermodynamic cycle efficiency of RRDE. Increasing the equivalence ratio can also improve the thermodynamic cycle efficiency and enhance the total pressure gain at lower inlet velocities. While at higher inlet velocities, increasing the equivalence ratio may reduce the total pressure gain. Numerical simulations are also performed to analyze the detailed flow field structure in RRDE and its variations with the inlet parameters. The simulation results demonstrate that the detonation wave can stably stand in the RRDE and can adapt to the change of the inlet equivalence ratio within a certain range. This study provides the preliminary theoretical basis and design reference for the RRDE.