AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Design and optimization of origami-inspired inflatable deployable tubular structures

Bo QIN, Shengnan LYU( ), Shiwei LIU, Xilun DING
School of Mechanical Engineering and Automation, Beihang University, Beijing 100191, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

Inflatable deployable structures inspired by origami have significant applications in space missions such as solar arrays and antennas. In this paper, a generalized Miura-ori tubular cell (GMTC) is presented as the basic cell to design a family of inflatable origami tubular structures with the targeted configuration. First, the classification of rigid foldable degree-4 vertices is studied thoroughly. Since the proposed GMTC is comprised of forming units (FU) and linking units (LU), types of FUs and LUs are investigated based on the classification of degree-4 vertices, respectively. The rigid foldability of the GMTC is presented by studying the kinematics of the FUs and LUs. Volume of the GMTC is analyzed to investigate multistable configurations of the basic cell. The variations in volume of the GMTC offer great potential for developing the inflatable tubular structure. Design method and parametric optimization of the tubular structure with targeted configuration are proposed. The feasibility of the approach is validated by the approximation of four different cases, namely parabolic, semicircular, trapezoidal, and straight-arc hybrid tubular structures.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
QIN B, LYU S, LIU S, et al. Design and optimization of origami-inspired inflatable deployable tubular structures. Chinese Journal of Aeronautics, 2025, 38(3). https://doi.org/10.1016/j.cja.2024.04.029

1951

Views

10

Crossref

9

Web of Science

12

Scopus

0

CSCD

Received: 06 March 2024
Revised: 19 March 2024
Accepted: 17 April 2024
Published: 09 May 2024
© 2024 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).