AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

An improved deviation model for transonic stages in axial compressors

Xiaochen WANGa, Xuesong LIa( ), Xiaodong RENa, Chunwei GUa, Xiaobin QUEb, Guoyu ZHOUb
Department of Energy and Power Engineering, Tsinghua University, Beijing 100084, China
China United Gas Turbine Technology Co. Ltd., Beijing 102209, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

Deviation model is an important model for through-flow analysis in axial compressors. Theoretical analysis in classical deviation models is developed under the assumption of one-dimensional flow, which is controlled by the continuity equation. To consider three-dimensional characteristics in transonic flow, this study proposes an improved theoretical analysis method combining force analysis of the blade-to-blade flow with conventional analysis of the continuity equation. Influences of shock structures on transverse force, streamwise velocity and streamline curvature in the blade-to-blade flow are analyzed, and support the analytical modelling of density flow ratio between inlet and outlet conditions. Thus, a novel deviation model for transonic stages in axial compressors is proposed in this paper. The empirical coefficients are corrected based on the experimental data of a linear cascade, and the prediction accuracy is validated with the experimental data of a three-stage transonic compressor. The novel model provides accurate predictions for meridional flow fields at the design point and performance curves at design speed, and shows obvious improvements on classical models by Carter and Çetin.

Electronic Supplementary Material

Download File(s)
cja-37-7-93_ESM.pdf (894.2 KB)

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 93-108

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
WANG X, LI X, REN X, et al. An improved deviation model for transonic stages in axial compressors. Chinese Journal of Aeronautics, 2024, 37(7): 93-108. https://doi.org/10.1016/j.cja.2024.04.015

1109

Views

4

Crossref

3

Web of Science

4

Scopus

2

CSCD

Received: 18 July 2023
Revised: 14 August 2023
Accepted: 29 October 2023
Published: 16 April 2024
© 2024 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).