AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Distributed active vibration control for helicopter based on diffusion collaboration

Yang YUANa, Yang LUa( ), Xunjun MAb, Jingliang LIa, Huiyu YUEa
National Key Laboratory of Helicopter Aeromechanics, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
Wuhan Second Ship Design and Research Institute, Wuhan 430205, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

The active vibration control technology has been successfully applied to several helicopter types. However, with the increasing of control scale, traditional centralized control algorithms are experiencing significant increase of computational complexity and physical implementation challenging. To address this issue, a diffusion collaboration-based distributed Filtered-x Least Mean Square algorithm applied to active vibration control is proposed, drawing inspiration from the concept of data fusion in wireless sensor network. This algorithm distributes the computation load to each node, and constructs the active vibration control network topology of large-scale system by discarding the weak coupling secondary paths between nodes, achieving distributed active vibration control. In order to thoroughly validate the effectiveness and superiority of this algorithm, a helicopter fuselage model is designed as the research object. Firstly, the excellent vibration reduction performance of the proposed algorithm is confirmed through simulations. Subsequently, specialized node control units are developed, which utilize STM32 microcontroller as the processing unit. Further, a distributed control system is constructed based on multi-processor collaboration. Building on this foundation, a large-scale active vibration control experimental platform is established. Based on the platform, experiments are carried out, involving the 4-input 4-output system and the 8-input 8-output system. The experimental results demonstrate that under steady-state harmonic excitation, the proposed algorithm not only ensures control effectiveness but also reduces computational complexity by 50%, exhibiting faster convergence speed compared with traditional centralized algorithms. Under time-varying external excitation, the proposed algorithm demonstrates rapid tracking of vibration changes, with vibration amplitudes at all controlled points declining by over 94%, proving the strong robustness and adaptive capability of the algorithm.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 208-232

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
YUAN Y, LU Y, MA X, et al. Distributed active vibration control for helicopter based on diffusion collaboration. Chinese Journal of Aeronautics, 2024, 37(8): 208-232. https://doi.org/10.1016/j.cja.2024.04.006

1013

Views

14

Crossref

0

Web of Science

15

Scopus

2

CSCD

Received: 30 August 2023
Revised: 31 October 2023
Accepted: 07 January 2024
Published: 10 April 2024
© 2024 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).