AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Characteristics of a pre-combustion plasma jet igniter

Jinlu YUa, Baowen ZHANGa,b( ), Yang YUa, Bingbing ZHAOa, Lei ZHANGa
Aviation Engineering School, Air Force Engineering University, Xi’an 710038, China
Equipment Management and Unmanned Aerial Vehicle Engineering School, Air Force Engineering University, Xi’an 710038, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

Plasma ignition technology has delivered good performance in the aerospace industry. In this study, a pre-combustion plasma jet igniter was designed, and its characteristics were examined from three aspects: the morphology, temperature, and discharge characteristics and process of ignition. Images of the OH distribution were obtained by using an OH Planar Laser⁃Induced Fluorescence (OH-PLIF) experimental system. Results have shown that the proposed plasma jet had a higher OH concentration, longer length, and larger area than those of a traditional igniter. The stability of discharge of the igniter was improved as the equivalence ratio φ was increased, and reducing gas flow reduced the pulsation of the plasma jet. When the input current was increased from 15 A to 35 A, the highest average temperature increased from 5127 K to 7987 K. An increase in the equivalence ratio reduced the region of arc ionization, but expanded the regions of the core combustion reaction and the outer flame. Herein, this study has obtained a deep understanding of the jet and ignition law and developed a new idea for the application of plasma in the ignition field. A pre-combustion plasma jet igniter can significantly improve the efficiency of ignition and shorten the ignition process compared with a traditional igniter.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 178-189

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
YU J, ZHANG B, YU Y, et al. Characteristics of a pre-combustion plasma jet igniter. Chinese Journal of Aeronautics, 2024, 37(7): 178-189. https://doi.org/10.1016/j.cja.2024.03.048

1110

Views

12

Crossref

12

Web of Science

11

Scopus

2

CSCD

Received: 26 July 2023
Revised: 05 September 2023
Accepted: 05 November 2023
Published: 03 April 2024
© 2024 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).