AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Full lifetime demonstration of a Micro-Cathode-Arc thruster evolution characteristics

Zhe ZHANG, Zijing ZHAO, Xiangyang LIU( ), Ningfei WANG
School of Aerospace Engineering, Beijing Institute of Technology, Beijing 100081, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

Ground lifetime test is the most crucial experiment to assess the performance, reliability, and flight qualification of electric propulsion, and it can bring new insights for understanding the operation characteristics. This work demonstrates a full lifetime test of 140000 cycles on a Micro-Cathode-Arc Thruster (μCAT) with 160 μs charging time and 86 mJ charging energy. A four-probe resistivity measurement method is utilized to investigate variations in the conductive film thickness and resistivity throughout the thruster lifespan. Direct film parameters show that the lifetime of the μCAT can be divided into three stages. In the initial stage, the film thickness decreases by 1.2 μm and the resistivity increases significantly due to the high discharge intensity and intense film ablation; In the steady stage, the change of the film thickness is within 5%, and the resistivity of the film increases slowly from 0.050 Ω·mm to 0.223 Ω·mm. In the end stage, the resistivity exponentially increases from 0.223 Ω·mm to 1.176 Ω·mm, with the increase accounting for 81%, ultimately resulting in the failure of the thruster open circuit. Additionally, the evolution of discharge parameters, and the variation of plume parameters are measured throughout the lifetime. The discharge characteristics also show significant differences in the duration of voltage and current in these three stages. The results of plume shape and plasma parameters are also well consistent with the discharge parameters and film state. These results suggest that, for evaluating the steady stage lifetime of thrusters, the film thickness is the best indicator compared to the variations in resistivity and voltage-current characteristics. For the end stage, the plasma plume morphology, discharge duration, and plume parameters can conveniently and clearly characterize the thruster failures and irregularity.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 38-49

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
ZHANG Z, ZHAO Z, LIU X, et al. Full lifetime demonstration of a Micro-Cathode-Arc thruster evolution characteristics. Chinese Journal of Aeronautics, 2024, 37(6): 38-49. https://doi.org/10.1016/j.cja.2024.03.043

1097

Views

11

Crossref

9

Web of Science

8

Scopus

2

CSCD

Received: 16 June 2023
Revised: 11 July 2023
Accepted: 28 August 2023
Published: 01 April 2024
© 2024 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).