AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Core shift limitation in investment casting process of hollow turbine blade

Kang CUIa,b, Lin JINGa, Ruisong JIANGc( ), Longnv YUa, Xiao GAOa
Automation and Software Engineering, Shanxi University, Taiyuan 030006, China
Key Laboratory of High Performance Manufacturing for Aero Engine, Ministry of Industry and Information Technology, School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an 710072, China
School of Mechanical Engineering, Sichuan University, Chengdu 610065, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

The deviation in wall thickness caused by core shift during the investment casting process significantly impacts the strength and service life of hollow turbine blades. To address this issue, a core shift limitation method is developed in this study. Firstly, a shift model is established based on computational fluid dynamics and motion simulation to predict the movement of the ceramic core in investment casting process. Subsequently, utilizing this model, an optimization method for fixturing layout inside the refractory ceramic shell is devised for the ceramic core. The casting experiment demonstrates that by utilizing the optimized fixture layout, not only can core shift during the investment casting pouring process be effectively controlled, but also the maximum wall thickness error of the blade can be reduced by 42.02%. In addition, the core shift prediction is also validated, with a prediction error of less than 26.9%.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 513-526

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
CUI K, JING L, JIANG R, et al. Core shift limitation in investment casting process of hollow turbine blade. Chinese Journal of Aeronautics, 2024, 37(8): 513-526. https://doi.org/10.1016/j.cja.2023.12.001

1920

Views

9

Crossref

10

Web of Science

14

Scopus

1

CSCD

Received: 30 August 2023
Revised: 17 September 2023
Accepted: 29 October 2023
Published: 06 December 2023
© 2023 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).