AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Aero-structural design of joined-wing aircraft based on high-fidelity model

Cheng HEa,b( ), Fengjiang ZHANa,b, Luchuang MAc, Gang CHENc, Jianying MAc
Unmanned Air Vehicle Research Institute, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
Key Laboratory of Advanced Technology for Small and Medium-sized UAV, Ministry of Industry and Information Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
Aerospace System Engineering Shanghai, Shanghai 201108, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

The joined-wing configuration reduces induced drag and structural weight by connecting the rear wing to the front wing. In addition, the rear wing can replace the role of the horizontal tail of a conventional aircraft, thus eliminating the aerodynamic drag and weight associated with the horizontal tail. This particular shape creates a highly coupled relationship between aerodynamics and structure, which must be fully considered during the overall design process to enhance aircraft performance. In this research, an aero-structural design model of the joined-wing aircraft is constructed based on high-fidelity computational fluid dynamics and structural finite element methods. The model is able to obtain accurate aerodynamic loads for the non-planar wing and to simulate the statically indeterminate structure of the closed wing configuration. The influence of the joined-wing shape parameters on the aerodynamic and structural disciplines, as well as the influence of geometric nonlinear characteristics, deformation constraints and buckling constraints on the structural weight are all taken into consideration. The model is applied to complete the aero-structural design optimization of a high-altitude long-endurance joined-wing aircraft, and wind tunnel tests are conducted. The test results verify the credibility of the design model proposed and the validity of the design environment.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 363-377

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
HE C, ZHAN F, MA L, et al. Aero-structural design of joined-wing aircraft based on high-fidelity model. Chinese Journal of Aeronautics, 2024, 37(4): 363-377. https://doi.org/10.1016/j.cja.2023.10.029

1270

Views

15

Crossref

13

Web of Science

14

Scopus

2

CSCD

Received: 23 April 2023
Revised: 19 June 2023
Accepted: 23 July 2023
Published: 02 November 2023
© 2023 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).