AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Space truss construction modeling based on on-orbit assembly motion feature

Changjie ZHAOa, Weizhong GUOa( ), Meng CHENb, Jiaxing HUa, Youcheng HANa, Rongfu LINa
State Key Lab of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai 200240, China
Institute of Aerospace System Engineering Shanghai, Shanghai 201109, China
Show Author Information

Abstract

More space truss construction has been planned to develop and utilize space resources. These trusses are designed in the way of large-scale, complex, modular, and on-orbit assembly. To meet the upcoming challenge of large-scale space infrastructure construction, it is necessary to study space truss automation design and robotic construction. This paper proposes an ordinal finite screw adjacency matrix model (OFSAMM), focusing on the relationship between assembly motions, to express and compute a space truss structure. In this model, a space truss is abstracted as a set of ordered assembly motions, each of which is recorded as a finite screw as the basic element of the truss and its assembly. The operation of truss transformation is also derived under this model. Therefore, the truss configuration, the assembly sequence, the truss sub-assembly, the truss components, and the on-orbit assembly task can be expressed and calculated in a unified model, which is calculated and stores the truss topology and assembly with the minimum storage cost. At the end of this paper, we introduce how to synthesize and optimize space truss design through two cases. The study will help to improve design efficiency. Furthermore, it provides a theoretical basis for the automatic construction of space truss structures, especially in the next stage.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 365-379

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
ZHAO C, GUO W, CHEN M, et al. Space truss construction modeling based on on-orbit assembly motion feature. Chinese Journal of Aeronautics, 2024, 37(3): 365-379. https://doi.org/10.1016/j.cja.2023.07.002

1638

Views

31

Crossref

31

Web of Science

38

Scopus

4

CSCD

Received: 17 January 2023
Revised: 14 March 2023
Accepted: 19 June 2023
Published: 12 July 2023
© 2023 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).