AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

A novel method to eliminate the bending-induced collapse of hexagonal honeycomb

Yujun LIa,b, Zhiyong ZHAOa( ), Chuang LIUa, Qi LIUa,b, Lishuai SUNa, Junbiao WANGa
School of Mechanical Engineering, Northwestern Polytechnical University, Xi’an 710072, China
AVIC Xi’an Aircraft Industry Group Company Ltd., Xi’an 710089, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

A novel grooving method for eliminating the bending-induced collapse of hexagonal honeycombs has been proposed, which lies in determining the appropriate grooving parameters, including the grooving spacing, angle, and depth. To this end, a framework built upon the experiment-based, machine learning approach for grooving parameters prediction was presented. The continuously grooved honeycomb bending experiments with various radii, honeycomb types, and thicknesses were carried out, and then the deformation level of honeycombs at different grooving spacing was quantitatively evaluated. A criterion for determining the grooving spacing was proposed by setting an appropriate tolerance for the out-of-plane compression strength. It was found that as the curvature increases, the grooving spacing increases due to the deformation level of honeycombs being more severe at a smaller bending radius. Besides, the grooving spacing drops as the honeycomb thickness increases, and the cell size has a positive effect on the grooving spacing, while the relative density has a negative effect on the grooving spacing. Furthermore, the data-driven Gaussian Process (GP) was trained from the collected data to predict the grooving spacing efficiently. The grooving angle and depth were calculated using the geometrical relationship of honeycombs before and after bending. Finally, the grooving parameters design and verification of a honeycomb sandwich fairing part were conducted based on the proposed grooving method.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 262-274

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
LI Y, ZHAO Z, LIU C, et al. A novel method to eliminate the bending-induced collapse of hexagonal honeycomb. Chinese Journal of Aeronautics, 2023, 36(10): 262-274. https://doi.org/10.1016/j.cja.2023.05.005

946

Views

12

Crossref

9

Web of Science

10

Scopus

1

CSCD

Received: 26 September 2022
Revised: 07 December 2022
Accepted: 03 January 2023
Published: 12 May 2023
© 2023 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).