AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Hole surface strengthening mechanism and riveting fatigue life of CFRP/aluminum stacks in robotic rotary ultrasonic drilling

Song DONG, Wenhe LIAO( ), Kan ZHENG, Feng XUE, Lianjun SUN
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

Carbon fiber reinforced plastic (CFRP) and aluminum stacks are widely used in aviation industry due to light weight and high performance. Millions of rivet holes need to be drilled on body materials, and more than 80% of fatigue cracks occur at the connection holes, so the damage and residual stress of hole surface have crucial effect on the riveting fatigue life of CFRP/aluminum stacks and the flight performance. Recently, robotic rotary ultrasonic drilling (RRUD) technology is a promising method to machine the stacks. However, the hole surface strengthening mechanism in RRUD and the service performance of the riveting joint are not verified. Thus, in this paper, the hole surface strengthening mechanism of RRUD for CFRP/aluminum stacks is investigated, a theoretical residual stress model is established, and the fatigue life experiment of riveted joints is conducted. Firstly, analysis on residual stress in RRUD is carried out with consideration of strengthening force and cutting temperature. Residual stress model is established based on the calculation of elastic stress, plastic stress and stress release. Validation experiment results show that ultrasonic vibration changes residual stress from tensile stress to compressive stress. At the same time, comparative damage analysis of CFRP hole exit and hole surface in robotic conventional drilling (RCD) and RRUD is presented. Finally, fatigue strength experiments of riveted joints are conducted for performance verification. Experimental results indicate that fatigue life of single-hole riveted joints is increased by 68% with ultrasonic vibration, and four-hole riveted joint arranged according to aerospace design standards is increased by more than 86%.

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 471-484

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
DONG S, LIAO W, ZHENG K, et al. Hole surface strengthening mechanism and riveting fatigue life of CFRP/aluminum stacks in robotic rotary ultrasonic drilling. Chinese Journal of Aeronautics, 2023, 36(10): 471-484. https://doi.org/10.1016/j.cja.2023.03.023

900

Views

24

Crossref

22

Web of Science

23

Scopus

3

CSCD

Received: 29 September 2022
Revised: 04 November 2022
Accepted: 13 November 2022
Published: 16 March 2023
© 2023 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).