AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Article Link
Collect
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Full Length Article | Open Access

Oblique shock train motion based on schlieren image processing

Longsheng XUEa,b, Chuan CHENGc,d, Chengpeng WANGa,b( ), Lantian ZHANGa,b, Kang LIa,b, Keming CHENGa,b
College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
Key Laboratory of Unsteady Aerodynamics and Flow Control, Ministry of Industry and Information Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
Beijing Institute of Tracking and Telecommunication Technology, Beijing 100094, China
Aerospace System Engineering Shanghai, Shanghai 201109, China

Peer review under responsibility of Editorial Committee of CJA.

Show Author Information

Abstract

In this paper, shock train motion in a Mach number 2.7 duct is studied experimentally, and large numbers of schlieren images are obtained by a high-speed camera. An image processing method based on Maximum Correlation Detection (MCD) is proposed to detect shock train motion from the schlieren images, based on which the key structures, e.g., separation positions and separation shock angles on the top and bottom walls, can be analysed in detail. The oscillations of the shock train are generated by rhombus and ellipse shafts at various excitation frequencies. According to the analysis of MCD results, the distributions of the frequency components of shock train oscillation generated by the two shafts are distinctly different, in which the motion generated by the ellipse shaft is much smoother; shock train motion is mainly characterized by the oscillation of separation position while the separation shock strength is not so sensitive to downstream disturbance; there is a hysteresis loop relation between the downstream pressure and separation position.

Electronic Supplementary Material

Download File(s)
cja-36-3-30_ESM.pdf (102.7 KB)

References

【1】
【1】
 
 
Chinese Journal of Aeronautics
Pages 30-41

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
XUE L, CHENG C, WANG C, et al. Oblique shock train motion based on schlieren image processing. Chinese Journal of Aeronautics, 2023, 36(3): 30-41. https://doi.org/10.1016/j.cja.2022.10.013

738

Views

13

Crossref

11

Web of Science

11

Scopus

3

CSCD

Received: 17 February 2022
Revised: 06 March 2022
Accepted: 18 April 2022
Published: 02 November 2022
© 2022 Chinese Society of Aeronautics and Astronautics.

This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).