Fretting-corrosion mechanisms of Ti6Al4V against CoCrMo in simulated body fluid under various fretting states

Pu J, Zhang Y L, Zhang X G, Yuan X L, Yang S, Zhang G X, Cui W, Tan Q, Jin Z M. Fretting corrosion behavior of Ti₆Al₄V alloy against zirconia-toughened alumina ceramic in simulated body fluid. J Mech Behav Biomed Mater 142: 105860 (2023)

Oladokun A, Hall R M, Neville A, Bryant M G. The evolution of subsurface micro-structure and tribo-chemical processes in cocrmo-ti6al4v fretting-corrosion contacts: What lies at and below the surface? Wear 440–441: 203095 (2019)

Su B X, Wang B B, Luo L S, Wang L, Su Y Q, Wang F X, Xu Y J, Han B S, Huang H G, Guo J J, et al. The corrosion behavior of Ti-6Al-3Nb-2Zr-1Mo alloy: Effects of HCl concentration and temperature. J Mater Sci Technol 74: 143–154 (2021)

Wu J, Li M, Lin C C, Gao P F, Zhang R, Li X, Zhang J X, Cai K Y. Moderated crevice corrosion susceptibility of Ti₆Al₄V implant material due to albumin-corrosion interaction. J Mater Sci Technol 109: 209–220 (2022)

Geringer J, Fridrici V, Ding H H, Kim K, Taylor T, Semetse L, Ehsani-Majd S, Olubambi P, Fontaine J, Kapsa P. Some hard or soft coatings to protect the pristine biometallic substrates under fretting-corrosion solicitations: What should be the best solution? Lubricants 8(5): 55 (2020)

Zhang X G, Zhang Y L, Jin Z M. A review of the bio-tribology of medical devices. Friction 10(1): 4–30 (2022)

Mali S A, Zhu D K, Liu Y P, Gilbert J L. Fretting crevice corrosion of 316L stainless steel in physiological phosphate buffered saline: Load, potential and alloy counterface effects. Tribol Int 164: 107198 (2021)

Contu F, Elsener B, Böhni H. Corrosion behaviour of CoCrMo implant alloy during fretting in bovine serum. Corros Sci 47(8): 1863–1875 (2005)

Wang S J, Yue T Y, Wang D G, Abdel Wahab M. Effect of wear debris on fretting fatigue crack initiation. Friction 10(6): 927–943 (2022)

El-Zein Z S, Gehrke C K, Croley J S, Siljander M P, Mallow M A, Flierl M A, Verner J J, Baker E A. Assessing taper geometry, head size, head material, and their interactions in taper fretting corrosion of retrieved total hip arthroplasty implants. J Arthroplasty 36(7): S386–S394. e4 (2021)

Liu Z, Liu H, Vowden R, Hughes L, Qi D H, Francis W, Perino G, Pink R, Xiao J, Li B, et al. Combination of cobalt, chromium and titanium nanoparticles increases cytotoxicity in vitro and pro-inflammatory cytokines in vivo. J Orthop Transl 38: 203–212 (2023)

Zhang Z N, Pan S H, Yin N, Shen B, Song J. Multiscale analysis of friction behavior at fretting interfaces. Friction 9(1): 119–131 (2021)

He J F, Cai Z B, Ren Y P, Peng J F, Liu J H, Zhu M H. Optimization of several surface treatment processes for alleviating fretting damage of a locking pin. Friction 10(8): 1217–1233 (2022)

Zhu D K, Liu Y P, Gilbert J L. In vitro fretting crevice corrosion damage of CoCrMo alloys in phosphate buffered saline: Debris generation, chemistry and distribution. Acta Biomater 114: 449–459 (2020)

Wang Z W, Yan Y, Su Y J, Qiao L J. Effect of proteins on the surface microstructure evolution of a CoCrMo alloy in bio-tribocorrosion processes. Colloids Surf B Biointerfaces 145: 176–184 (2016)

Ma X, Tan W, Bonzom R, Mi X, Zhu G R. Impact-sliding fretting tribocorrosion behavior of 316L stainless steel in solution with different halide concentrations. Friction 11(12): 2310–2328 (2023)

Royhman D, Patel M, Runa M J, Wimmer M A, Jacobs J J, Hallab N J, Mathew M T. Fretting-corrosion behavior in hip implant modular junctions: The influence of friction energy and pH variation. J Mech Behav Biomed Mater 62: 570–587 (2016)

Mace A, Gilbert J L. A mass balance analysis of the tribocorrosion process of titanium alloys using a single micro-asperity: Voltage and solution effects on plastic deformation, oxide repassivation, and ion dissolution. J Mech Behav Biomed Mater 136: 105531 (2022)

Ryu J J, Cudjoe E, Patel M V, Caputo M. Sliding corrosion fatigue of metallic joint implants: A comparative study of CoCrMo and Ti₆Al₄V in simulated synovial environments. Lubricants 10(4): 65 (2022)

Yang S, Pu J, Zhang X G, Zhang Y L, Cui W, Xie F B, Lu W P, Tan Q, Jin Z M. A preliminary experimental investigation on the biotribocorrosion of a metal-on-polyethylene hip prosthesis in a hip simulator. Friction 11(6): 1094–1106 (2023)

Feyzi M, Fallahnezhad K, Taylor M, Hashemi R. The tribocorrosion behaviour of Ti-6Al-4V alloy: The role of both normal force and electrochemical potential. Tribol Lett 70(3): 83 (2022)

Liu Y P, Gilbert J L. Effect of simulated inflammatory conditions and potential on dissolution and surface oxide of CoCrMo alloy: In situ electrochemical atomic force microscopy study. Electrochim Acta 262: 252–263 (2018)

Taufiqurrakhman M, Neville A, Bryant M G. The effect of protein structure and concentration on tribocorrosion and film formation on CoCrMo alloys. J Bio Tribo Corros 7(4): 147 (2021)

Liu Y P, Gilbert J L. The effect of simulated inflammatory conditions and pH on fretting corrosion of CoCrMo alloy surfaces. Wear 390–391: 302–311 (2017)

Gopal V, Manivasagam G. Wear–corrosion synergistic effect on Ti–6Al–4V alloy in H₂O₂ and albumin environment. J Alloys Compd 830: 154539 (2020)

Wimmer M A, Radice S, Janssen D, Fischer A. Fretting-corrosion of CoCr-alloys against TiAl₆V₄: The importance of molybdenum in oxidative biological environments. Wear 477: 203813 (2021)

Royhman D, Patel M, Jacobs J J, Wimmer M A, Hallab N J, Mathew M T. In vitro simulation of fretting-corrosion in hip implant modular junctions: The influence of pH. Med Eng Phys 52: 1–9 (2018)

Fischer A, Janssen D, Wimmer M A. The influence of molybdenum on the fretting corrosion behavior of CoCr/ TiAlV couples. Biotribology 11: 8–19 (2017)

Fischer A, Fullam S, Telouk P, Wimmer M A. The mechanism-based approach of understanding run-in and steady state: A gross-slip fretting experiment to fathom tribocorrosion of total hip taper junctions. Biotribology 25: 100165 (2021)

Ding H H, Fridrici V, Bouvard G, Geringer J, Kapsa P. Influence of calf serum on fretting behaviors of Ti–6Al–4V and diamond-like carbon coating for neck adapter–femoral stem contact. Tribol Lett 66(3): 110 (2018)

Xie X C, Guo Z N, Liang Z W, Xiao J R, Zhao Z. Enhanced high-temperature wear resistance of GCr15 steel balls by generating a Ti+Nb diffusion layer via mechanical alloying and NH₃·H₂O treatment. Surf Coat Technol 466: 129632 (2023)

Xie X C, Guo Z N, Xiao J R, Liang Z W, Wei S, Feng W K, Zhao Z, Liu X C. Improved wear properties of GCr15 steel balls by fabricating a surface Ti diffusion layer using mechanical alloying and NH₃·H₂O treatment. J Mater Res Technol 22: 1961–1970 (2023)

Smith S M, Gilbert J L. Interfacial compliance, energy dissipation, frequency effects, and long-term fretting corrosion performance of Ti-6Al-4V/CoCrMo interfaces. J Biomedical Materials Res 110(2): 409–423 (2022)

Smith S M, Gilbert J L. Compliant interfaces and fretting corrosion of modular taper junctions in total hip implants: The micromechanics of contact. Tribol Int 151: 106437 (2020)

Zhou Z R, Gu S R, Vincent L. An investigation of the fretting wear of two aluminium alloys. Tribol Int 30(1): 1–7 (1997)

Zhou Z R, Nakazawa K, Zhu M H, Maruyama N, Kapsa P, Vincent L. Progress in fretting maps. Tribol Int 39(10): 1068–1073 (2006)

Lin X Z, Zhu M H, Cai Z B, Dou B J, Cui X J. Torsional fretting corrosion behaviours of Ti₆Al₄V alloys in Hank’s simulated bodyfluid. Corros Eng Sci Technol 54(4): 298–309 (2019)

Lin X, Cai Z, Yi J, Cui X, Dou B, Zhu M. Torsional fretting wear of Ti6AI4V alloys in saline solutions. Rare Metal Mater Eng 48(6): 1742–1748 (2019) (in Chinese)

Bigerelle M, Giljean S, Mathia T G. Multiscale characteristic lengths of abraded surfaces: Three stages of the grit-size effect. Tribol Int 44(1): 63–80 (2011)

Xin L, Han Y M, Lu Y H, Shoji T. Investigation on the fretting wear behavior and mechanisms of alloy 690TT during the transformation from mixed regime to partial slip regime induced by elevated temperature. Tribol Trans 62(3): 464–475 (2019)

Zhang Z N, Yin N, Chen S, Liu C L. Tribo-informatics: Concept, architecture, and case study. Friction 9(3): 642–655 (2021)

Yuan X L, Li G, Zhang X Y, Pu J, Ren P D. An experimental investigation on fretting wear behavior of copper–magnesium alloy. Wear 462–463: 203497 (2020)

Fouvry S, Kapsa P, Vincent L. Analysis of sliding behaviour for fretting loadings: Determination of transition criteria. Wear 185(1–2): 35–46 (1995)

Argatov I I, Chai Y S. A theoretical justification of the slip index concept in fretting analysis. Friction 11(7): 1265–1275 (2023)

Stemmer P, Fischer A. Pathways of dissipation of frictional energy under boundary lubricated sliding wear of martensitic materials. Lubricants 6(2): 34 (2018)

Kim K, Geringer J. Analysis of energy dissipation in fretting corrosion experiments with materials used as hip prosthesis. Wear 296(1–2): 497–503 (2012)

Mindlin R D, Deresiewicz H. Elastic spheres in contact under varying oblique forces. J Appl Mech 20(3): 327–344 (1953)

Godet M. The third-body approach: A mechanical view of wear. Wear 100(1–3): 437–452 (1984)