AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Friction Article
PDF (3.1 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Impact of surface roughness on the coefficient of friction of polymer-on-polymer contacts for deflection pulley-rope systems in the lift industry

Ainhoa GUINEA1, Andrea AGINAGALDE1, Wilson TATO1, Iñigo LLAVORI1, Pablo GARCIA2, Leire ARRAIAGO2, Alaitz ZABALA1( )
Mechanical and Industrial Production Department, Mondragon Unibertsitatea, Mondragon 20500, Spain
Orona EIC, Orona Ideo, Hernani 20120, Spain
Show Author Information

Abstract

The coefficient of friction (CoF) between the deflection pulley and rope in a lift strongly affects the life span of the rope. Although surface roughness is a key factor affecting the metallic pulley–rope CoF, its effect on polymeric pulleys is unknown. The present study analyses the effect of roughness and working conditions on cast polyamide 6 (PA6G) deflection pulley–thermoplastic polyurethane (TPU)-coated rope contacts. The statistical analysis revealed that the effect of surface roughness on the CoF for low-load tests was significant. The present study contributes significantly to parameter selection in deflection pulley machining to minimise friction between the pulley and rope.

Graphical Abstract

Keywords

polymer-on-polymerfrictionroughnessdry sliding

References

【1】
【1】
 
 
Crossref Google Scholar
Friction
Volume 12 Issue 9,
September 2024
Pages 2126-2138
DOI: 10.1007/s40544-024-0881-8

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Cite this Report
Close
Close
Cite this article:
GUINEA A, AGINAGALDE A, TATO W, et al. Impact of surface roughness on the coefficient of friction of polymer-on-polymer contacts for deflection pulley-rope systems in the lift industry. Friction, 2024, 12(9): 2126-2138. https://doi.org/10.1007/s40544-024-0881-8

1999

Views

146

Downloads

10

Crossref

8

Web of Science

10

Scopus

0

CSCD
Received: 05 January 2023
Revised: 17 May 2023
Accepted: 03 February 2024
Published: 01 July 2024
© The author(s) 2024.

This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.