AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Friction Article
PDF (24.1 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Review Article | Open Access

A review of advances in tribology in 2020–2021

Yonggang MENG1, Jun XU1( ), Liran MA1, Zhongmin JIN2,3, Braham PRAKASH1, Tianbao MA1, Wenzhong WANG4
State Key Laboratory of Tribology in Advanced Equipment, Tsinghua University, Beijing 100084, China
School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China
School of Mechanical Engineering, University of Leeds, Leeds LS2 9JT, UK
School of Mechanical and Vehicle Engineering, Beijing Institute of Technology, Beijing 100082, China
Show Author Information

Abstract

Around 1,000 peer-reviewed papers were selected from 3,450 articles published during 2020–2021, and reviewed as the representative advances in tribology research worldwide. The survey highlights the development in lubrication, wear and surface engineering, biotribology, high temperature tribology, and computational tribology, providing a show window of the achievements of recent fundamental and application researches in the field of tribology.

Keywords

lubricationfrictionwearsurface engineeringtribologybiotribologyhigh temperaturecomputer simulations

References

[1]
Meng Y G, Xu J, Jin Z M, Prakash B, Hu Y Z. A review of recent advances in tribology. Friction 8(2): 221–300 (2020)
Crossref Google Scholar
[2]
Jlaiel K, Yahiaoui M, Paris J Y, Denape J. Tribolumen: A tribometer for a correlation between AE signals and observation of tribological process in real-time—Application to a dry steel/glass reciprocating sliding contact. Lubricants 8(4): 47 (2020)
Crossref Google Scholar
[3]
Buse H, Schueler F, Hodúlová E. Planar contact fretting test method applied to solid lubricants. Lubricants 9(6): 130 (2021)
Crossref Google Scholar
[4]
Zhang X, Glovnea R. Grease film thickness measurement in rolling bearing contacts. Proc Inst Mech Eng Part J 235(7): 1430–1439 (2020)
Crossref Google Scholar
[5]
Liu Z, Liu M, Zhang C, Chu H, Ma L, Cheng Q, Cai H, Chen J. Applications of sum-frequency generation vibrational spectroscopy in friction interfac. Friction 10(2): 179–199 (2021)
Crossref Google Scholar
[6]
Bair S. Is it possible to extract the pressure dependence of low-shear viscosity from EHL friction? Tribol Int 151: 106454 (2020)
Crossref Google Scholar
[7]
Otsu T, Komatsu K, Hashimura S. Discussion on shear properties and flow model in screw tightening lubricant PIB under low sliding speed conditions. Tribol Int 151: 106474 (2020)
Crossref Google Scholar
[8]
Hansen J, Bjorling M, Larsson R. Topography transformations due to running-in of rolling-sliding non-conformal contacts. Tribol Int 144: 106126 (2020)
Crossref Google Scholar
[9]
Macián V, Tormos B, Bermúdez V, Bastidas S. Development of a floating liner test rig and lubrication model for the study of the piston compression ring friction force under fully flooded and starved lubrication. Tribol Int 160: 107034 (2021)
Crossref Google Scholar
[10]
Chmelar J, Petr K, Mossoczy P, Dynybyl V. Experimental study of lubrication film monitoring in a roller bearing by utilization of surface acoustic waves. Tribol Int 141: 105908 (2020)
Crossref Google Scholar
[11]
Bouchot A, Ferrieux A, Debayle J, Mollon G, Descartes S. Image processing applied to tribological dry contact analysis. Wear 476: 203748 (2021)
Crossref Google Scholar
[12]
Guo H, Pang J R, Adukure A R, Iglesias P. Influence of hydrogen bonding and ionicity of protic ionic liquids on lubricating steel-steel and steel-aluminum contacts: Potential ecofriendly lubricants and additives. Tribol Lett 68(4): 144 (2020)
Crossref Google Scholar
[13]
Hasnul M H, Mohd Zulkifli N W, Hassan M, Zulkifli S A, Mohd Yusoff M N A, Zakaria M Z. Synergistic behavior of graphene and ionic liquid as bio-based lubricant additive. Lubricants 9(5): 46 (2021)
Crossref Google Scholar
[14]
Khanmohammadi H, Wijanarko W, Espallargas N. Ionic liquids as additives in water-based lubricants: From surface adsorption to tribofilm formation. Tribol Lett 68(4): 130 (2020)
Crossref Google Scholar
[15]
Bartolome Saez M, Hernandez Battez A E, Espina Casado J, Viesca Rodriguez J L, Fernandez-Gonzalez A, Gonzalez Rodriguez R. Tribological behavior of oils additised with a phosphonium-derived ionic liquid compared to a commercial oil. Ind Lubr Tribol 73(1): 137–144 (2021)
Crossref Google Scholar
[16]
Yang S, Zhang D, Wong J S S, Cai M. Interactions between ZDDP and an oil-soluble ionic liquid additive. Tribol Int 158: 106938 (2021)
Crossref Google Scholar
[17]
Yao Y, Xu Y, Fan X, Zhu M, Liu G. Tribological properties of spherical and mesoporous NiAl particles as ionic liquid additives. Friction 8(2): 384–395 (2019)
Crossref Google Scholar
[18]
Yu Q, Zhang C, Dong R, Shi Y, Wang Y, Bai Y, Zhang J, Cai M, Zhou F, Liu W. Physicochemical and tribological properties of gemini-type halogen-free dicationic ionic liquids. Friction 9(2): 344–355 (2020)
Crossref Google Scholar
[19]
Michalec M, Svoboda P, Krupka I, Hartl M, Vencl A. Investigation of the tribological performance of ionic liquids in non-conformal EHL contacts under electric field activation. Friction 8(5): 982–994 (2020)
Crossref Google Scholar
[20]
Gan C, Liang T, Li W, Fan X, Li X, Li D, Zhu M. Hydroxyl-terminated ionic liquids functionalized graphene oxide with good dispersion and lubrication function. Tribol Int 148: 106350 (2020)
Crossref Google Scholar
[21]
Aviles M D, Jimenez A E, Saurin N, Carrion F J, Sanes J, Bermudez M D. Tribological characterization of epoxy coatings modified with ionic liquids and graphene. Tribol Int 149: 105516 (2020)
Google Scholar
[22]
Li Y, Zhang S, Ding Q, Hu L. Effect of cation nature on vacuum tribo-degradation and lubrication performances of two tetrafluoroborate ionic liquids. Tribol Int 150: 106360 (2020)
Crossref Google Scholar
[23]
Al-Sallami W, Parsaeian P, Dorgham A, Neville A. Effect of ionic liquids’ chemistry on their lubrication behaviour under various contact pressures. Tribol Int 151: 106465 (2020)
Crossref Google Scholar
[24]
Chen W, Amann T, Kailer A, Rühe J. Macroscopic friction studies of alkylglucopyranosides as additives for water-based lubricants. Lubricants 8(1): 11 (2020)
Crossref Google Scholar
[25]
Guo F, Wu F, Wu F, Wang Y. Low-friction mechanism of silicon carbide and cemented carbide in wate. Proc Inst Mech Eng Part J 235(5): 945–951(2020)
Crossref Google Scholar
[26]
Feng B, Luan Z, Zhang T, Liu J, Hu X, Guan J, Xu X. Capillary electroosmosis properties of water lubricants with different electroosmotic additives under a steel-on-steel sliding interface. Friction 10(7): 1019–1034 (2022)
Crossref Google Scholar
[27]
Ji M, Liu S H, Xiao H P. Investigation on tribological behavior of glyceride-filled microcapsules as additives in water-based drilling mud. Tribol Trans 64(3): 454–467 (2021)
Crossref Google Scholar
[28]
Liu W R, Simic R, Liu Y H, Spencer N D. Effect of contact geometry on the friction of acrylamide hydrogels with different surface structures. Friction 10(3): 360–373 (2022)
Crossref Google Scholar
[29]
Tang W, Jiang Z, Wang B, Li Y. Black phosphorus quantum dots: A new-type of water-based high-efficiency lubricant additive. Friction 9(6): 1528–1542 (2021)
Crossref Google Scholar
[30]
Wang Q J, Hou T L, Wang W, Zhang G L, Gao Y, Wang K S. Tribological behavior of black phosphorus nanosheets as water-based lubrication additives. Friction 10(3): 374–387 (2022)
Crossref Google Scholar
[31]
Zhang X, Yu T, Guo F, Liang P. Analysis of the influence of small quantity secondary lubricant on water lubrication. Tribol Int 159: 106998 (2021)
Crossref Google Scholar
[32]
Jiang Y, Xiao C, Chen L, Li J, Zhang C, Zhou N, Qian L, Luo J. Temporary or permanent liquid superlubricity failure depending on shear-induced evolution of surface topography. Tribol Int 161: 107076 (2021)
Crossref Google Scholar
[33]
Li L, Ding M, Lin B, Zhang B, Zhang Y, Sui T. Influence of silica nanoparticles on running-in performance of aqueous lubricated Si3N4 ceramics. Tribol Int 159: 106968 (2021)
Crossref Google Scholar
[34]
Wei Q, Fu T, Yue Q, Liu H, Ma S, Cai M, Zhou F. Graphene oxide/brush-like polysaccharide copolymer nanohybrids as eco-friendly additives for water-based lubrication. Tribol Int 157: 106895 (2021)
Crossref Google Scholar
[35]
Bin Abdollah M F, Amiruddin H, Alif Azmi M, Mat Tahir N A. Lubrication mechanisms of hexagonal boron nitride nano-additives water-based lubricant for steel–steel contact. Proc Inst Mech Eng Part J 235(5): 1038–1046 (2021)
Crossref Google Scholar
[36]
Liu X, Zhou X, Yang C, Huang J, Kuang F, Wang H. Study on the effect of particle size and dispersion of SiO2 on tribological properties of nitrile rubber. Wear 460–461: 203428 (2020)
Crossref Google Scholar
[37]
Xie Z, Zhu W. Theoretical and experimental exploration on the micro asperity contact load ratios and lubrication regimes transition for water-lubricated stern tube bearing. Tribol Int 164: 107105 (2021)
Crossref Google Scholar
[38]
Cao F X, Yan F Y, Wang J Z. Role of graphene oxide on the tribological properties of cf reinforcement high strength glass fabric/phenolic laminate composites in water environment. Ind Lubr Tribol 72(7): 873–879 (2020)
Crossref Google Scholar
[39]
Lin X, Wang R, Zhang S, Jiang S. Study on dynamic characteristics for high speed water-lubricated spiral groove thrust bearing considering cavitating effect. Tribol Int 143: 106022 (2020)
Crossref Google Scholar
[40]
Bahrami M, Le Houérou V, Rühe J. Lubrication of surfaces covered by surface-attached hydrogel layers. Tribol Int 149: 105637 (2020)
Crossref Google Scholar
[41]
Yang Z, Guo Z, Yang Z, Wang C, Yuan C. Study on tribological properties of a novel composite by filling microcapsules into UHMWPE matrix for water lubrication. Tribol Int 153: 106629 (2021)
Crossref Google Scholar
[42]
Yang Y, Liu T F, Dai Y J, Wang Y, Zhang C H. Effect of amines on the lubricity of castor oil-sulfated sodium salt solution for titanium alloys. Tribol Lett 68(1): 19 (2020)
Crossref Google Scholar
[43]
Xue Y, Shi X, Huang Q, Zhang K, Wu C. Effects of groove-textured surfaces with Sn-Ag-Cu and MXene-Ti3C2 on tribological performance of CSS-42L bearing steel in solid-liquid composite lubrication system. Tribol Int 161: 107099 (2021)
Crossref Google Scholar
[44]
Yang H M, Li J H, Zeng X Q. Tribological behavior of nanocarbon materials with different dimensions in aqueous systems. Friction 8(1): 29–46 (2020)
Crossref Google Scholar
[45]
Chen L, Xu C, Ma M, Wang W, Guo L, Wong P. Effects of cleaning detergent/water-in-oil emulsions on elastohydrodynamic lubrication. Ind Lubr Tribol 73(7): 1045–1051 (2021)
Crossref Google Scholar
[46]
Ghezzi I, Tonazzi D, Rovere M, Le Coeur C, Berthier Y, Massi F. Frictional behaviour of a greased contact under low sliding velocity condition. Tribol Int 155: 106788 (2021)
Crossref Google Scholar
[47]
Feng C, Zhang D, Grecov D, Chen K. Effect of rheological properties of friction-enhancing greases on the friction between friction lining and wire rope. Tribol Int 144: 106143 (2020)
Crossref Google Scholar
[48]
Buyanovskii I A, Tatur I R, Samusenko V D, Solenov V S. Effect of antifriction solid additives on the temperature stability of bentonite greases. J Frict Wear 41(6): 492–496 (2020)
Crossref Google Scholar
[49]
Li X, Guo F, Poll G, Fei Y, Yang P. Grease film evolution in rolling elastohydrodynamic lubrication contacts. Friction 9(1): 179–190 (2020)
Crossref Google Scholar
[50]
Han Y, Wang J, Wang S, Zou Q, Barber G. Response of grease film at low speeds under pure rolling reciprocating motion. Friction 9(1): 115–135 (2020)
Crossref Google Scholar
[51]
Frache L, Komba E H, Philippon D, Galipaud J, De Barros M I, Douillard T, Masenelli-Varlot K, Bouscharain N, Maheo Y, Sarlin R, Le Jeune G, Berthier Y, Bou-Said B, Massi F. Observation of a modified superficial layer on heavily loaded contacts under grease lubrication. Tribol Int 158: 106143 (2021)
Crossref Google Scholar
[52]
Georgiou E P, Drees D, De Bilde M, Anderson M, Carlstedt M, Mollenhauer O. Quantification of tackiness of a grease: The road to a method. Lubricants 9(3): 32 (2021)
Crossref Google Scholar
[53]
Joysula S K, Dube A, Patro D, Veeregowda D H. On the fictitious grease lubrication performance in a four-ball tester. Lubricants 9(3): 33 (2021)
Crossref Google Scholar
[54]
Kunishima T, Nagai S, Kurokawa T, Galipaud J, Guillonneau G, Bouvard G, Abry J C, Minfray C, Fridrici V, Kapsa P. Effects of temperature and addition of zinc carboxylate to grease on the tribological properties of PA66 in contact with carbon steel. Tribol Int 153: 106578 (2021)
Crossref Google Scholar
[55]
Qi P, Wang S, Li J, Li Y, Dong G. Synergistic lubrication effect of antioxidant and low content ZDDP on PFPE grease. Ind Lubr Tribol 73(5): 830–838 (2021)
Crossref Google Scholar
[56]
Kumar N, Saini V, Bijwe J. Exploration of Talc nanoparticles to enhance the performance of Lithium grease. Tribol Int 162: 107107 (2021)
Crossref Google Scholar
[57]
Rylski A, Siczek K. The effect of addition of nanoparticles, especially ZrO2-based, on tribological behavior of lubricants. Lubricants 8(3): 23 (2020)
Crossref Google Scholar
[58]
Zhang H, Han S, Hu W, Li J. Tribological study of TiO2 nanoparticles modified with stearic acid as additives in lithium grease. Ind Lubr Tribol 73(6): 904–910 (2021)
Crossref Google Scholar
[59]
Wang H, Wang Y, Liu Y, Zhao J, Li J, Wang Q, Luo J. Tribological behavior of layered double hydroxides with various chemical compositions and morphologies as grease additives. Friction 9(5): 952–962 (2021)
Crossref Google Scholar
[60]
Sanchez Garrido D, Leventini S, Martini A. Effect of temperature and surface roughness on the tribological behavior of electric motor greases for hybrid bearing materials. Lubricants 9(6): 59 (2021)
Crossref Google Scholar
[61]
Kanazawa Y, De Laurentis N, Kadiric A. Studies of friction in grease-lubricated rolling bearings using ball-on-disc and full bearing tests. Tribol Trans 63(1): 77–89 (2020)
Crossref Google Scholar
[62]
Sammaiah A, Dai Q, Huang W, Wang X. Synthesis of GO-Fe3O4-based ferrofluid and its lubrication performances. Proc Inst Mech Eng Part J 234(7): 1160–1167 (2019)
Crossref Google Scholar
[63]
Li Y, Yang R, Hao Q, Lei W. Tribological properties of the functionalized graphene/montmorillonite nanosheets as a lubricant additive. Tribol Lett 69(4): 117 (2021)
Crossref Google Scholar
[64]
Anand R, Raina A, Ul Haq M I, Mir M J, Gulzar O, Wani M F. Synergism of TiO2 and graphene as nano-additives in bio-based cutting fluid-an experimental investigation. Tribol Trans 64(2): 350–366 (2021)
Crossref Google Scholar
[65]
Liu L, Zhou M, Mo Y, Bai P, Wei Q, Jin L, You S, Wang M, Li L, Chen X, Li X, Tian Y. Synergistic lubricating effect of graphene/ionic liquid composite material used as an additive. Friction 9(6): 1568–1579 (2020)
Crossref Google Scholar
[66]
Wu P, Chen X, Zhang C, Zhang J, Luo J, Zhang J. Modified graphene as novel lubricating additive with high dispersion stability in oil. Friction 9(1): 143–154 (2021)
Crossref Google Scholar
[67]
Javeed A, John B. Tribological performance of nanolubricants dispersed with graphene oxide and detonation nanodiamond. Proc Inst Mech Eng Part J 235(9): 1937–1949 (2021)
Crossref Google Scholar
[68]
Kumar A, Deval P, Shrinet E S, Ghosh S K. Investigation on tribological properties of used engine oil with graphene. Proc Inst Mech Eng Part J 235(7): 1420–1429 (2021)
Crossref Google Scholar
[69]
Wang J, Mi H, Zhou W, Yang X, He Y. Preparation and tribological characteristics of graphene/triangular copper nanoplate composites as grease additive. Ind Lubr Tribol 73(5): 802–808 (2021)
Crossref Google Scholar
[70]
Nasser K I, Liñeira del Río J M, Mariño F, López E R, Fernández J. Double hybrid lubricant additives consisting of a phosphonium ionic liquid and graphene nanoplatelets/ hexagonal boron nitride nanoparticles. Tribol Int 163: 107189 (2021)
Crossref Google Scholar
[71]
Huynh K K, Tieu K A, Pham S T. Synergistic and competitive effects between zinc dialkyldithiophosphates and modern generation of additives in engine oil. Lubricants 9(4): 35 (2021)
Crossref Google Scholar
[72]
Bellini M, Bianchi S, Zaccheria F, Ravasio N. Vegetable oils as triple bottom line compliant lubricants. Tribol Int 161: 107103 (2021)
Crossref Google Scholar
[73]
Cortes V, Sanchez K, Gonzalez R, Alcoutlabi M, Ortega J A. The performance of SiO2 and TiO2 nanoparticles as lubricant additives in sunflower oil. Lubricants 8(1): 10 (2020)
Crossref Google Scholar
[74]
Wang N, Wang H, Ren J, Gao G, Zhao G, Yang Y, Wang J. High-efficient and environmental-friendly PTFE@SiO2 core-shell additive with excellent AW/EP properties in PAO6. Tribol Int 158: 106930 (2021)
Crossref Google Scholar
[75]
Abdel-Rehim A A, Akl S, Elsoudy S. Investigation of the tribological behavior of mineral lubricant using copper oxide nano additives. Lubricants 9(2): 16 (2021)
Crossref Google Scholar
[76]
Wu L, Lei X, Zhang Y, Zhang S, Yang G, Zhang P. The tribological mechanism of cerium oxide nanoparticles as lubricant additive of poly-alpha olefin. Tribol Lett 68(4): 101 (2020)
Crossref Google Scholar
[77]
Ma X L, Gan C L, Li X P, Li Y T, Feng P, Fan X Q, Ye X Y, Zhu M H. Tribological properties of SiO2@Cu and SiO2@MoS2 core-shell microspheres as lubricant additives. Tribol Lett 69(3): 108 (2021)
Crossref Google Scholar
[78]
Thrush S J, Comfort A S, Dusenbury J S, Xiong Y Z, Qu H W, Han X, Schall J D, Barber G C, Wang X. Stability, thermal conductivity, viscosity, and tribological characterization of zirconia nanofluids as a function of nanoparticle concentration. Tribol Trans 63(1): 68–76 (2020)
Crossref Google Scholar
[79]
Tu Z Q, Hu E H, Wang B B, David K D, Seeger P, Moneke M, Stengler R, Hu K H, Hu X G. Tribological behaviors of Ni-modified citric acid carbon quantum dot particles as a green additive in polyethylene glycol. Friction 8(1): 182–197 (2020)
Crossref Google Scholar
[80]
Trajano M F, Franceschini D F, Silva E F, Correa M A, Bohn F, Alves S M. Enhancement of Cu nanoparticles dispersion in nanolubricants by magnetron sputtering deposition and its influence on the tribological behavior. J Tribol-Trans ASME 143(11): 112101 (2021)
Crossref Google Scholar
[81]
Hu J, Zhang Y, Yang G, Gao C, Song N, Zhang S, Zhang P. In-situ formed carbon based composite tribo-film with ultra-high load bearing capacity. Tribol Int 152: 106577 (2020)
Crossref Google Scholar
[82]
Yang J, Yuan Y, Li K, Amann T, Wang C, Yuan C, Neville A. Ultralow friction of 5CB liquid crystal on steel surfaces using a 1,3-diketone additive. Wear 480–481: 203934 (2021)
Crossref Google Scholar
[83]
Kilincarslan E, Kilincarslan S K, Cetin M H. Evaluation of the clean nano-cutting fluid by considering the tribological performance and cost parameters. Tribol Int 157: 106916 (2021)
Crossref Google Scholar
[84]
Dolatabadi N, Rahmani R, Rahnejat H, Garner C P, Brunton C. Performance of poly alpha olefin nanolubricant. Lubricants 8(2): 17 (2020)
Crossref Google Scholar
[85]
Han X, Thrush S J, Zhang Z, Barber G C, Qu H. Tribological characterization of ZnO nanofluids as fastener lubricants. Wear 468–469: 203592 (2021)
Crossref Google Scholar
[86]
Virdi R L, Chatha S S, Singh H. Experimental investigations on the tribological and lubrication behaviour of minimum quantity lubrication technique in grinding of Inconel 718 alloy. Tribol Int 153: 106581 (2021)
Crossref Google Scholar
[87]
Dhanola A, Garg H. Dispersion stability and rheology study of canola oil containing TiO2 nanoadditives for tribological applications: An experimental approach. Proc Inst Mech Eng Part J 235(9): 1765–1781 (2021)
Google Scholar
[88]
Hamdan S H, Lee C T, Lee M B, Chong W W F, Chong C T, Sanip S M. Synergistic nano-tribological interaction between zinc dialkyldithiophosphate (ZDDP) and methyl oleate for biodiesel-fueled engines. Friction 9(3): 612–626 (2021)
Crossref Google Scholar
[89]
Liu K, Kang J J, Zhang G A, Lu Z B, Yue W. Effect of temperature and mating pair on tribological properties of DLC and GLC coatings under high pressure lubricated by MoDTC and ZDDP. Friction 9(6): 1390–1405 (2021)
Crossref Google Scholar
[90]
Han X, Zhang Z, Thrush S J, Barber G C, Qu H. Ionic liquid stabilized nanoparticle additive in a steel-ceramic contact for extreme pressure application. Wear 452–453: 203264 (2020)
Crossref Google Scholar
[91]
Zhang Y, Zhang Y, Zhang S, Yang G, Gao C, Zhou C, Zhang C, Zhang P. One step synthesis of ZnO nanoparticles from ZDDP and its tribological properties in steel-aluminum contacts. Tribol Int 141: 105890 (2020)
Crossref Google Scholar
[92]
Salaji S, Jayadas N. Evaluation of physicochemical and tribological properties of chaulmoogra (Hydnocarpus wightianus) oil as green lubricant base stock. Proc Inst Mech Eng Part J 235(2): 376–385 (2021)
Crossref Google Scholar
[93]
Guo Z, Zhang Y, Wang J, Gao C, Zhang S, Zhang P, Zhang Z. Interactions of Cu nanoparticles with conventional lubricant additives on tribological performance and some physicochemical properties of an ester base oil. Tribol Int 141: 105941 (2020)
Crossref Google Scholar
[94]
Massoud T, De Matos R P, Le Mogne T, Belin M, Cobian M, Thiebaut B, Loehle S, Dahlem F, Minfray C. Effect of ZDDP on lubrication mechanisms of linear fatty amines under boundary lubrication conditions. Tribol Int 141: 105954 (2020)
Crossref Google Scholar
[95]
Wu C, Yang K, Chen Y, Ni J, Yao L, Li X. Investigation of friction and vibration performance of lithium complex grease containing nano-particles on rolling bearing. Tribol Int 155: 106761 (2021)
Crossref Google Scholar
[96]
Öncü G, Durak E. Utilization of waste vegetable oil methyl esters as lubricant oil. Proc Inst Mech Eng Part J 235(10): 2144–2154 (2021)
Crossref Google Scholar
[97]
Liu P, Wang X, Wu J, Lin W, Feng Y, Chen B, Fang J, Jiang Z. Effect of boron-nitrogen modified soybean oil additive on biodegradability, anti-oxidation property, and lubricity of rapeseed oil. Proc Inst Mech Eng Part J 234(2): 282–291 (2019)
Crossref Google Scholar
[98]
Nomede-Martyr N, Bilas P, Thomas P, Minatchy G, Romana L. Tribological performances of graphite and hexagonal boron nitride particles in the presence of liquid. J Tribol-Trans ASME 143(7): 071401 (2021)
Crossref Google Scholar
[99]
Cyriac F, Tee X Y, Poornachary S K, Chow P S. Influence of structural factors on the tribological performance of organic friction modifiers. Friction 9(2): 380–400 (2020)
Crossref Google Scholar
[100]
Fan M, Ai J, Zhang S, Yang C, Du X, Wen P, Ye X, Zhou F, Liu W. Lubricating properties of ester oil prepared from bio-based 2,5-furandicarboxylic acid. Friction 8(2): 360–369 (2020)
Crossref Google Scholar
[101]
Ma Q, Khan A M, Wang Q J, Yip Wah C. Dependence of tribological performance and tribopolymerization on the surface binding strength of selected cycloalkane-carboxylic acid additives. Tribol Lett 68(3): 86 (2020)
Crossref Google Scholar
[102]
Kossoko N F, Dubreuil F, Thiebaut B, Belin M, Minfray C. Diblock polymeric friction modifier (PFM) in the boundary regime: Tribological conditions leading to low friction. Tribol Int 163: 107186 (2021)
Crossref Google Scholar
[103]
Garlapati V K, Mohapatra S B, Mohanty R C, Das P. Transesterified olax scandens oil as a bio-additive: Production and engine performance studies. Tribol Int 153: 106653 (2021)
Crossref Google Scholar
[104]
Patil P P, Gori Y, Kumar A, Tyagi M R. Experimental analysis of tribological properties of polyisobutylene thickened oil in lubricated contacts. Tribol Int 159: 106983 (2021)
Crossref Google Scholar
[105]
Farfan-Cabrera L I, Gallardo-Hernández E A, Pérez-González J, Marín-Santibáñez B M, Lewis R, González-Lamas A K. Evaluation of thermo-oxidized Jatropha bio-oil in lubrication of actual wet clutch materials. Proc Inst Mech Eng Part J 235(10): 2021–2033 (2020)
Crossref Google Scholar
[106]
Faujdar E, Singh R K. Methyl oleate derived multifunctional additive for polyol based lubricants. Wear 466–467: 203550 (2021)
Crossref Google Scholar
[107]
Ermakov S F, Sychev A P, Kolesnikov I V, Boiko M V, Sychev A A, Sokolov S I, Kravchenko A Y. Tribological characteristics of chemically inactive surfaces in lubricants doped with cholesterol and fatty acid compounds. J Frict Wear 42(1): 7–10 (2021)
Crossref Google Scholar
[108]
Gheisari R, Polycarpou A A. Synergistic physical and chemical interactions of selected additives and base oil used in extended reach drilling applications. Wear 478–479: 203889 (2021)
Crossref Google Scholar
[109]
White D, Podolak K, Kraus G A, Sundararajan S. Tribological analysis of a novel lubricant additive: Pyrone esters. Wear 442–443: 203115 (2020)
Crossref Google Scholar
[110]
Ma Q, Wang S, Dong G. Macroscale liquid superlubricity achieved with mixtures of fructose and diols. Wear 484–485: 204037 (2021)
Crossref Google Scholar
[111]
Jiang S, Yuan C, Wong J S S. Effectiveness of glycerol-monooleate in high-performance polymer tribo-systems. Tribol Int 155: 106753 (2021)
Crossref Google Scholar
[112]
Fry B M, Chui M Y, Moody G, Wong J S S. Interactions between organic friction modifier additives. Tribol Int 151: 106438 (2020)
Crossref Google Scholar
[113]
Hong F T, Alghamdi N M, Bailey A S, Khawajah A, Sarathy S M. Chemical and kinetic insights into fuel lubricity loss of low-sulfur diesel upon the addition of multiple oxygenated compounds. Tribol Int 152: 106559 (2020)
Crossref Google Scholar
[114]
Gorbacheva S N, Yarmush Y M, Ilyin S O. Rheology and tribology of ester-based greases with microcrystalline cellulose and organomodified montmorillonite. Tribol Int 148: 106318 (2020)
Crossref Google Scholar
[115]
Bojarska Z, Kopytowski J, Mazurkiewicz-Pawlicka M, Bazarnik P, Gierlotka S, Rozen A, Makowski L. Molybdenum disulfide-based hybrid materials as new types of oil additives with enhanced tribological and rheological properties. Tribol Int 160: 106999 (2021)
Crossref Google Scholar
[116]
Huai W, Chen X, Lu F, Zhang C, Ma L, Wen S. Tribological properties of sulfur- and phosphorus-free organic molybdenum compound as additive in oil. Tribol Int 141: 105944 (2020)
Crossref Google Scholar
[117]
Vaitkunaite G, Espejo C, Wang C, Thiebaut B, Charrin C, Neville A, Morina A. MoS2 tribofilm distribution from low viscosity lubricants and its effect on friction. Tribol Int 160: 106999 (2021)
Crossref Google Scholar
[118]
Zhang Q, Song H, Wu B, Feng W, Li X, Jiao Y, Hu X. Effect of magnetic field on the tribological behaviors of Fe3O4@MoS2 as polyalphaolefin additive in the steel/steel friction interface. Wear 466–467: 203586 (2021)
Crossref Google Scholar
[119]
Garcia I, Galipaud J, Kosta I, Grande H, Garcia-Lecina E, Dassenoy F. Influence of the organic moiety on the tribological properties of MoS2: Glycol hybrid nanoparticles-based dispersions. Tribol Lett 68(4): 104 (2021)
Crossref Google Scholar
[120]
Gong K L, Lou W J, Zhao G Q, Wu X H, Wang X B. MoS2 nanoparticles grown on carbon nanomaterials for lubricating oil additives. Friction 9(4): 747–757 (2021)
Crossref Google Scholar
[121]
Gupta M K, Song Q, Liu Z, Sarikaya M, Jamil M, Mia M, Khanna N, Krolczyk G M. Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti–6Al–4V alloy. Tribol Int 153: 106582 (2021)
Crossref Google Scholar
[122]
Liu C, Meng Y, Tian Y. Potential-controlled boundary lubrication using MoS2 additives in diethyl succinate. Tribol Lett 68(3): 72 (2021)
Crossref Google Scholar
[123]
Jiang C, Wang Y, Su H, Li W, Lou W, Wang X. Synthesis and evaluation of a protic ionic liquid as a multifunctional lubricant additive. Friction 8(3): 568–576 (2020)
Crossref Google Scholar
[124]
Syahir A Z, Zulkifli N W M, Masjuki H H, Kalam M A, Harith M H, Yusoff M, Zulfattah Z M, Jamshaid M. Tribological improvement using ionic liquids as additives in synthetic and bio-based lubricants for steel-steel contacts. Tribol Trans 63(2): 235–250 (2020)
Crossref Google Scholar
[125]
Kawada S, Sasaki S, Miyatake M. In-situ observation of tribo-decomposition behavior of ionic liquids composed of phosphonium-cation and cyano-anion using quadrupole mass spectrometer. Tribol Int 153: 106547 (2021)
Crossref Google Scholar
[126]
Yue S, Gao X, Lu G, Zang S, Deng G, Wang F. Tribological behavior of environmentally friendly borate ionic liquids with low corrosion degree. Tribol Int 162: 107100 (2021)
Crossref Google Scholar
[127]
Lin W, Chen B, Fang J, Gu K, Wu J. Influence of sizes on tribological properties and tribofilm formation of lanthanum borate nanospheres in soybean oil. Proc Inst Mech Eng Part J 235(10): 2184–2199 (2021)
Crossref Google Scholar
[128]
Zhang H, Chang Q. Fluorine-doped amorphous carbon-coated magnesium silicate hydroxide as lubricant additive and atomic simulation. Tribol Lett 69(1): 11 (2021)
Crossref Google Scholar
[129]
Jiang F, Sun H, Chen L, Lei F, Sun D. Dispersion-tribological property relationship in mineral oils containing 2D layered α-zirconium phosphate nanoplatelets. Friction 8(4): 695–707 (2020)
Crossref Google Scholar
[130]
Wang K P, Wu H C, Wang H D, Liu Y H, Yang L, Zhao L M. Tribological properties of novel palygorskite nanoplatelets used as oil-based lubricant additives. Friction 9(2): 332–343 (2021)
Crossref Google Scholar
[131]
Gao R Q, Liu W B, Chang Q Y, Zhang H, Liu Y. Tribological property of biocarbon-based magnesium silicate hydroxide nanocomposite as lubricant additive at different concentrations of additive and dispersant. J Tribol-Trans ASME 143(7): 071901 (2021)
Crossref Google Scholar
[132]
Kumar H, Harsha A P. Augmentation in tribological performance of polyalphaolefins by COOH-functionalized multiwalled carbon nanotubes as an additive in boundary lubrication conditions. J Tribol-Trans ASME 143(10): 102202 (2021)
Crossref Google Scholar
[133]
Saini V, Bijwe J, Seth S, Ramakumar S S V. Role of base oils in developing extreme pressure lubricants by exploring nano-PTFE particles. Tribol Int 143: 106071 (2020)
Crossref Google Scholar
[134]
Xu M, Dai Q, Huang W, Wang X. Using magnetic fluids to improve the behavior of ball bearings under starved lubrication. Tribol Int 141: 105950 (2020)
Crossref Google Scholar
[135]
Sagbas B. Tribological performance of PEEK with green lubricant enhanced by nano hexagonal boron nitride powder. Ind Lubr Tribol 72(2): 203–210 (2020)
Crossref Google Scholar
[136]
Voronin S V, Stefanov V A, Onopreichuk D V, Safoniuk I Y, Anoshkina N N. Effect of concentration and type of liquid crystal additive on tribological characteristics of industrial oils. J Frict Wear 41(4): 365–369 (2020)
Crossref Google Scholar
[137]
Wang Y, Yang P, Guo B, Jiang N, Chi J, Liu J, Liang Y, Yu Q, Yang S, Guo F, Cai M, Zhou F. Functionalized phosphate ionic liquids as additives in PEG with excellent tribological properties for boundary/mixed/ elastohydrodynamic lubrication. Tribol Int 164: 107242 (2021)
Crossref Google Scholar
[138]
Feng S, Liu Y, Li J, Wang H, Wen S. Insight into the lubrication behavior of phospholipids pre-adsorbed on silica surfaces at different adsorption temperatures. Langmuir 36(45): 13477–13484 (2021)
Crossref Google Scholar
[139]
Chen Z, Kim S H. Measuring nanoscale friction at graphene step edges. Friction 8(4): 802–811 (2020)
Crossref Google Scholar
[140]
Vigdorowitsch M, Ostrikov V V, Sazonov S N, Safonov V V, Orobinsky V I. How carbon-based nanosheets protect: Mechanistic models. Tribol Lett 69(3): 102 (2021)
Crossref Google Scholar
[141]
Fu H, Duan F. Effects of environmental moisture and functional groups on the sliding adhesive behaviour of graphene steps. Tribol Lett 69(3): 104 (2021)
Google Scholar
[142]
Motozuka S, Sato H, Muramatsu Y, Morinaga M. Interfacial effect between graphite and iron substrate on basal plane orientation and lubricity of graphite. Tribol Int 151: 106455 (2020)
Google Scholar
[143]
Tahir N A M, Bin Abdollah M F, Tamaldin N, Amiruddin H, Zin M R B M, Liza S. Tribological performance of the graphene synthesized from fruit cover plastic waste and oil palm fiber using a CVD method. Ind Lubr Tribol 72(6): 771–777 (2020)
Google Scholar
[144]
Singh V, Raja P, Katiyar J K, Ramkumar P. Effect of friction modifiers compositions on tribological properties of Cu-Sn alloy/Al2O3 brake composite material. Proc Inst Mech Eng Part J 235(10): 1541–1550 (2021)
Google Scholar
[145]
Chen H, Ba Z, Qiao D, Feng D, Song Z, Zhang J. Study on the tribological properties of graphene oxide composite films by self-assembly. Tribol Int 151: 106533 (2021)
Google Scholar
[146]
Zhen J, Cheng J, Tan H, Sun Q, Zhu S, Yang J, Liu W. Investigation of tribological characteristics of nickel alloy-based solid-lubricating composites at elevated temperatures under vacuum. Friction 9(5): 990–1001 (2021)
Google Scholar
[147]
Feng Y, Fang J, Wu J, Gu K, Liu P. Mechanical and tribological properties of plasma sprayed graphene nanosheets/Al2O3+13 wt%TiO2 composite coating. Tribol Int 146: 106233 (2021)
Google Scholar
[148]
Wu J, Yin X, Mu L, Feng X, Lu X, Shi Y. Hollow IF-MoS2/r-GO nanocomposite filled polyimide coating with improved mechanical, thermal and tribological properties. Coatings 11(1): 25 (2020)
Google Scholar
[149]
Luo B, Liu C S, Liu X L, Zhang L. Effect of expanded graphite on the tribological behavior of tin-bronze fiber brushes sliding against brass. Tribol Trans 63(1): 1–8 (2020)
Google Scholar
[150]
Kumar S, Singh K, Ramkumar J. The effects of graphene nanoplatelets on the tribological performance of glass fiber-reinforced epoxy composites. Proc Inst Mech Eng Part J 235(8): 1514–1525 (2021)
Google Scholar
[151]
Zhao B, Yu X, Liu Y, Yang L, Zhang Z, Zhang B. Frictional characteristics of heterostructure film composed of graphene and H-BN with the consideration of defects. Tribol Int 153: 106607 (2021)
Crossref Google Scholar
[152]
Zhang H, Zhang N, Fang F. Synergistic effect of surfactant and saccharin on dispersion and crystal refinement for electrodeposition of nanocrystalline nickel/graphene oxide composite. Surf Coat Technol 402: 126292 (2020)
Crossref Google Scholar
[153]
Shi S C, Jiang S Z. Influence of graphene/copper hybrid nanoparticle additives on tribological properties of solid cellulose lubricants. Surf Coat Technol 389: 125655 (2020)
Crossref Google Scholar
[154]
Avilés M D, Jiménez A E, Saurín N, Carrión F J, Sanes J, Bermúdez M D. Tribological characterization of epoxy coatings modified with ionic liquids and graphene. Tribol Int 149: 105516 (2020)
Crossref Google Scholar
[155]
Dias H W J, Medeiros A B, Binder C, Rodrigue Neto J B, Klein A N, De Mello J D B. Tribological evaluation of turbostratic 2D graphite as oil additive. Lubricants 9(4): 43 (2021)
Crossref Google Scholar
[156]
Pape F, Poll G. Investigations on graphene platelets as dry lubricant and as grease additive for sliding contacts and rolling bearing application. Lubricants 8(1): 3 (2019)
Crossref Google Scholar
[157]
Xie M, Cheng J, Huo C, Zhao G. Improving the lubricity of a bio-lubricating grease with the multilayer graphene additive. Tribol Int 150: 106386 (2020)
Crossref Google Scholar
[158]
Xu J, Luo T, Chen X, Zhang C, Luo J. Nanostructured tribolayer-dependent lubricity of graphene and modified graphene nanoflakes on sliding steel surfaces in humid air. Tribol Int 145: 106203 (2020)
Crossref Google Scholar
[159]
Gan C, Liang T, Li X, Li W, Li H, Fan X, Zhu M. Ultra-dispersive monolayer graphene oxide as water-based lubricant additive: Preparation, characterization and lubricating mechanisms. Tribol Int 155: 106768 (2021)
Crossref Google Scholar
[160]
Li P P, Ji L, Li H X, Chen L, Liu X H, Zhou H D, Chen J M. Role of nanoparticles in achieving macroscale superlubricity of graphene/nano-SiO2 particle composites Friction 10(9): 1305–1316 (2022)
Crossref Google Scholar
[161]
Han Z, Gan C, Li X, Feng P, Ma X, Fan X, Zhu M. Electrochemical preparation of modified-graphene additive towards lubrication requirement. Tribol Int 161: 107057 (2021)
Crossref Google Scholar
[162]
Kasiorowski T, Lin J, Soares P, Lepienski C M, Neitzke C A, de Souza G B, Torres R D. Microstructural and tribological characterization of DLC coatings deposited by plasma enhanced techniques on steel substrates. Surf Coat Technol 389: 125615 (2020)
Crossref Google Scholar
[163]
Claver A, Jiménez-Piqué E, Palacio J F, Almandoz E, Fernández De Ara J, Fernández I, Santiago J A, Barba E, García J A. Comparative study of tribomechanical properties of HiPIMS with positive pulses DLC coatings on different tools steels. Coatings 11(1): 28 (2020)
Crossref Google Scholar
[164]
Pillaca E J D M, Trava-Airoldi V J, Ramírez M A. Axial distribution improvements of DLC film on the inner surface of a long stainless steel tube. Surf Coat Technol 412: 126996 (2021)
Crossref Google Scholar
[165]
Hatada R, Flege S, Ensinger W, Baba K. Deposition of diamond-like carbon films on insulating substrates by plasma source ion implantation. Surf Coat Technol 385: 125426 (2021)
Crossref Google Scholar
[166]
Dorner-Reisel A, Engel A, Schürer C, Svoboda S, Weißmantel S. Tribological behaviour of femtosecond laser micro-patterned hydrogenated DLC in dry and hyaluronic gel lubricated conditions. Surf Coat Technol 399: 126082 (2021)
Crossref Google Scholar
[167]
Tillmann W, Lopes Dias N F, Stangier D, Hagen L, Schaper M, Hengsbach F, Hoyer K-P. Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting. Surf Coat Technol 394: 125748 (2020)
Crossref Google Scholar
[168]
Bai C, Qiang L, Zhang B, Gao K, Zhang J. Optimizing the tribological performance of DLC-coated NBR rubber: The role of hydrogen in films. Friction 10(6): 866–877 (2022)
Crossref Google Scholar
[169]
Chen L, Wei X, Zhang G, Shang L, Lu Z, Nie X, Xue Q. Probing the tribological performances of hydrogenated amorphous carbon film in methane atmosphere based on Hertzian elastic contact model. Tribol Int 155: 106790 (2021)
Crossref Google Scholar
[170]
Shi P, Sun J, Liu Y, Zhang B, Zhang J, Chen L, Qian L. Running-in behavior of a H-DLC/Al2O3 pair at the nanoscale. Friction 9(6): 1464–1473 (2021)
Crossref Google Scholar
[171]
Arshad M S, Kovač J, Cruz S, Kalin M. Physicochemical and tribological characterizations of WDLC coatings and ionic-liquid lubricant additives: Potential candidates for low friction under boundary-lubrication conditions. Tribol Int 151: 106482 (2021)
Crossref Google Scholar
[172]
Weikert T, Wartzack S, Baloglu M V, Willner K, Gabel S, Merle B, Pineda F, Walczak M, Marian M, Rosenkranz A, Tremmel S. Evaluation of the surface fatigue behavior of amorphous carbon coatings through cyclic nanoindentation. Surf Coat Technol 407: 126769 (2021)
Crossref Google Scholar
[173]
Iwata T, Oikawa M, Chida R, Ishii D, Ogihara H, Mihara Y, Kano M. Excellent seizure and friction properties achieved with a combination of an a-C:H:Si DLC-coated journal and an aluminum alloy plain bearing. Coatings 11(9): 1055 (2021)
Crossref Google Scholar
[174]
Liu G, Wen Z, Chen K, Dong L, Wang Z, Zhang B, Qiang L. Optimizing the microstructure, mechanical, and tribological properties of Si-DLC coatings on NBR rubber for its potential applications. Coatings 10(7): 671 (2020)
Crossref Google Scholar
[175]
Bellón Vallinot I, de la Guerra Ochoa E, Echávarri Otero J, Chacón Tanarro E, Fernández Martínez I, Santiago Varela J A. Individual and combined effects of introducing DLC coating and textured surfaces in lubricated contacts. Tribol Int 151: 106440 (2020)
Crossref Google Scholar
[176]
Xu X, Guo P, Zuo X, Sun L, Li X, Lee K R, Wang A. Understanding the effect of Al/Ti ratio on the tribocorrosion performance of Al/Ti co-doped diamond-like carbon films for marine applications. Surf Coat Technol 402: 126347 (2020)
Crossref Google Scholar
[177]
Jing P P, Ma D L, Gong Y L, Luo X Y, Zhang Y, Weng Y J, Leng Y X. Influence of Ag doping on the microstructure, mechanical properties, and adhesion stability of diamond-like carbon films. Surf Coat Technol 405: 126542 (2021)
Crossref Google Scholar
[178]
Zhang Y G, Sun W C, Dong Y R, Ma M, Liu Y W, Tian S S, Xiao Y, Jia Y P. Electrodeposition and microstructure of Ni and B co-doped diamond-like carbon (Ni/B-DLC) films. Surf Coat Technol 405: 126713 (2021)
Crossref Google Scholar
[179]
Zhang T, Xu Z, Su Y, Wang J, Li L, Chong K B, Hou X, Paddea S. Formation of tribofilm in the friction of fluorinated diamond-like carbon (FDLC) film against Ti6Al4V in bovine serum albumin (BSA) solution. Coatings 10(9): 903 (2020)
Crossref Google Scholar
[180]
Kamel B M, Tirth V, Algahtani A, Shiba M S, Mobasher A, Hashish H A, Dabees S. Optimization of the rheological properties and tribological performance of SAE 5w-30 base oil with added MWCNTs. Lubricants 9(9): 94 (2021)
Crossref Google Scholar
[181]
Kałużny J, Waligórski M, Szymański G M, Merkisz J, Różański J, Nowicki M, Al Karawi M, Kempa K. Reducing friction and engine vibrations with trace amounts of carbon nanotubes in the lubricating oil. Tribol Int 151: 106484 (2020)
Crossref Google Scholar
[182]
Liu Z, Wang Y, Glatzel T, Hinaut A, Zhang J, Meyer E. Low friction at the nanoscale of hydrogenated fullerene-like carbon films. Coatings 10(7): 643 (2020)
Crossref Google Scholar
[183]
Wang Z, Fu Q, Wood R J K, Wu J, Wang S. Influence of bionic non-smooth surface texture on tribological characteristics of carbon-fiber-reinforced polyetheretherketone under seawater lubrication. Tribol Int 144: 106100 (2020)
Crossref Google Scholar
[184]
Hu Z, Fan X, Chen C. Multiscale frictional behaviors of sp2 nanocrystallited carbon films with different ion irradiation densities. Friction 9(5): 1025–1037 (2021)
Crossref Google Scholar
[185]
Vitu T, Huminiuc T, Doll G, Bousser E, Matthews A, Polcar T. Tribological properties of Mo–S–C coating deposited by pulsed d.c. magnetron sputtering. Wear 480–481: 203939 (2021)
Crossref Google Scholar
[186]
Fu J, Xu C, Ma D, Zhu X, Cheng D, Yan Z, Ma C, Liu G, Fu Y. Tribological properties and releasing behavior of solid lubricant WS2 in the dimples on cylinder liner surface of diesel engine. Tribol Int 158: 106936 (2021)
Crossref Google Scholar
[187]
Ru G, Qi W, Tang K, Wei Y, Xue T. Interlayer friction and superlubricity in bilayer graphene and MoS2/MoSe2 van der Waals heterostructures. Tribol Int 151: 106483 (2020)
Crossref Google Scholar
[188]
Yadav S, Arif T, Wang G, Sodhi R N S, Cheng Y H, Filleter T, Singh C V. Interfacial interactions and tribological behavior of metal-oxide/2D-material contacts. Tribol Lett 69(3): 91 (2021)
Crossref Google Scholar
[189]
Arif T, Wang G, Sodhi R N S, Colas G, Filleter T. Role of chemical vs. physical interfacial interaction and adsorbed water on the tribology of ultrathin 2D-material/steel interfaces. Tribol Int 163: 107194 (2021)
Crossref Google Scholar
[190]
Liu C, Yin Y G, Tong B H, Zhang G T. Tribological properties of MoS2 powder-lubricated interface. Ind Lubr Tribol 73(6): 839–845 (2021)
Crossref Google Scholar
[191]
He J, Zhou W, Chen S, Wu A, Zhou Y, Chen Y, Wang J, Li H. Tribological properties of MoS2 nano-flowers supported by porous alumina aperture array. Tribol Int 161: 107093 (2021)
Crossref Google Scholar
[192]
Fleming C. An investigation into the behaviour of selected boundary regime lubricants when cold forging steel under rolling-sliding conditions. Tribol Int 157: 106771 (2021)
Crossref Google Scholar
[193]
Slapnik J, Stiller T, Wilhelm T, Hausberger A. Influence of solid lubricants on the tribological performance of photocurable resins for vat photopolymerization. Lubricants 8(12): 104 (2020)
Crossref Google Scholar
[194]
Lu D W, Qian G, Feng Y, Zhao H, Zhou Z J, Zhang X B. Tribological behaviors of Cu/RGO/WS2 composites in air and vacuum environments. Tribol Trans 63(4): 621–633 (2020)
Crossref Google Scholar
[195]
Nautiyal H, Kumari S, Rao U S, Tyagi R, Khatri O P. Tribological performance of Cu–rGO–MoS2 nanocomposites under dry sliding. Tribol Lett 68(1): 29 (2020)
Crossref Google Scholar
[196]
Zuo Z, Yang Y, Song L, Zhang Z, Jin X. Characterization and tribological performance of polyethersulfone/PTFE compound filled with Na-montmorillonite. Tribol Lett 69(4): 138 (2021)
Crossref Google Scholar
[197]
Levin T, Harel Y, Lellouche J P, Moshkovich A, Lapsker I, Laikhtman A, Rapoport L. Tungsten disulfide inorganic nanotubes functionalized by PTFE for friction application. Lubricants 9(8): 78 (2021)
Crossref Google Scholar
[198]
Abe A, Choudhury D, Zou M. Improved tribological performance of polydopamine/polytetrafluoroethylene thin coatings with silica nanoparticles incorporated into the polydopamine underlayer. J Tribol-Trans ASME 143(11): 9 (2021)
Crossref Google Scholar
[199]
Chen Z, Wu Z, Sun J, Mao C, Su F. Improved load-bearing capacity and tribological properties of PTFE coatings induced by surface texturing and the addition of GO. Tribol Lett 69(2): 47 (2021)
Crossref Google Scholar
[200]
Liang L, Song L, Yang Y, Li F, Ma Y. Tribological properties of polytetrafluoroethylene improved by incorporation of fluorinated graphene with various fluorine/carbon ratios under dry sliding condition. Tribol Lett 69(1): 21 (2021)
Crossref Google Scholar
[201]
He Y, Guo Z, Wu Z, Yuan C. Effect of polyester fiber orientation on the tribological properties of ultrahigh molecular weight polyethylene composites for water lubrication. Tribol Int 158: 106935 (2021)
Crossref Google Scholar
[202]
Hausberger A, Stiller T, Kappl C, Hensgen L, Grün F. Improving the tribological properties of technical polymers with metal sulphide compounds. Lubricants 9(9): 91 (2021)
Crossref Google Scholar
[203]
Tadokoro C, Sato K, Nagamine T, Nakano K, Sasaki S, Sato T, Sakakibara K, Tsujii Y. Concentrated polymer brush as reciprocating seal material for low leakage and low friction. Tribol Trans 63(1): 20–27 (2020)
Crossref Google Scholar
[204]
Ebersbach F G, Hammes G, de Mello J D B, Schroeter R B, Binder C, Klein A N. Tribological behavior of surfaces obtained by turning in sintered self-lubricating composites. Tribol Trans 64(1): 143–156 (2021)
Crossref Google Scholar
[205]
Bai P, Li S, Jia W, Ma L, Meng Y, Tian Y. Environmental atmosphere effect on lubrication performance of gallium-based liquid metal. Tribol Int 141: 105904 (2020)
Crossref Google Scholar
[206]
Li X, Wang Z, Dong G. Preparation of nanoscale liquid metal droplet wrapped with chitosan and its tribological properties as water-based lubricant additive. Tribol Int 148: 106349 (2020)
Crossref Google Scholar
[207]
Li X, Qi P, Liu Q, Dong G. Improving tribological behaviors of gallium-based liquid metal by h-BN nano-additive. Wear 484–485: 203852 (2021)
Crossref Google Scholar
[208]
Bouchehit B, Bou-Said B, Tichy J, Bou-Saïd B. Towards ecological alternatives in bearing lubrication. Lubricants 9(6): 62 (2021)
Crossref Google Scholar
[209]
Ma J, Yi P, Jia H, Jiang Y, Sun J, Zhan X, Liu Y. Effects of oil retention property for sinusoidal textures on tribological characteristics under scarcity oil supply. Tribol Int 158: 106918 (2021)
Crossref Google Scholar
[210]
Chaudhary R, Pandey R, Mazumdar S. Tribological studies of low and high viscous oils lubricated heavily loaded textured point contacts under the reciprocating motion. Proc Inst Mech Eng Part J 234(2): 229–246 (2020)
Crossref Google Scholar
[211]
Korenaga A, Mano H, Omura A, Ohana T, Aso S, Sadakata K, Tanabe S, Akiyama Y, Habuki F. Friction reduction of oil-impregnated sintered bearings by surface texturing. J Tribol-Trans ASME 142(9): 5 (2020)
Crossref Google Scholar
[212]
Long R S, Zhao C, Jin Z H, Zhang Y M, Pan Z, Sun S N, Gao W H. Influence of groove dimensions on the tribological behavior of textured cylindrical roller thrust bearings under starved lubrication. Ind Lubr Tribol 73(6): 971–979 (2021)
Crossref Google Scholar
[213]
Turalioglu K, Taftali M, Yetim F. Determining the tribological behavior of 316L stainless steel with lubricating micro-channels produced by the selective laser melting (SLM) method. Ind Lubr Tribol 73(5): 700–707 (2021)
Crossref Google Scholar
[214]
Yagi K, Matsunaka W, Sugimura J. Impact of textured surfaces in starved hydrodynamic lubrication. Tribol Int 154: 106756 (2021)
Crossref Google Scholar
[215]
Wang Y J, Li Q, Zhang S, Tang X H, Xu W W, Wang Z B. Analysis of turbulence and blocking effects on loading capacity for elementary texture cells of infinite width under water lubrication. Ind Lubr Tribol 73(1): 103–112 (2021)
Crossref Google Scholar
[216]
Meng F M, Han H L, Ma Z F, Tang B P. Effects of aviation lubrication on tribological performances of graphene/MoS2 composite coating. J Tribol-Trans ASME 143(3): 031401 (2021)
Crossref Google Scholar
[217]
Yin B F, Wang X F, Xu B, Huang G Y, Kuang X. Adaptability of piston skirt coatings on the tribological performance of heavy-duty diesel engine under low viscosity lubricant. Ind Lubr Tribol 73(6): 986–992 (2021)
Crossref Google Scholar
[218]
Wang Z, Tian C, Tolstogouzov A, Liang F, Zou C, Li S, Gusev S I, Yousaf M I, Pelenovich V, Zuo W, Fu D, Hu D. Microstructure and rutherford backscattering spectrometry of hard/lubricant Mo–Ti–Al–N multilayered coatings prepared by multi-arc ion plating at low substrate rotation. Coatings 10(2): 101 (2020)
Crossref Google Scholar
[219]
Vieira L E, Goncalves A L, Arraya N I R, Neto J B R, Dias A, Klein A N. Characterization of sintered bronze-MoS2 composite with solid lubrication effect. J Tribol-Trans ASME 143(7): 6 (2020)
Crossref Google Scholar
[220]
Xiao J, Wu Y, Zhang W, Chen J, Zhang C. Friction of metal-matrix self-lubricating composites: Relationships among lubricant content, lubricating film coverage, and friction coefficient. Friction 8(3): 517–530 (2020)
Crossref Google Scholar
[221]
Miao K, Wang J, Zhao Q, Wang K, Wen M, Zhang K. Water-based lubrication of niobium nitride. Friction 10(6): 842–853 (2022)
Crossref Google Scholar
[222]
Yan C Q, Karthik N, Kang Y H, Xiong D S. Preparation of self-lubricating coating by mechanical milling. Ind Lubr Tribol 72(7): 829–933 (2020)
Crossref Google Scholar
[223]
Evaristo M, Fernandes F, Cavaleiro A. Room and high temperature tribological behaviour of W-DLC coatings produced by DCMS and hybrid DCMS-HiPIMS configuration. Coatings 10(4): 319 (2020)
Crossref Google Scholar
[224]
Bashandeh K, Tsigkis V, Lan P, Polycarpou A A. Extreme environment tribological study of advanced bearing polymers for space applications. Tribol Int 153: 106634 (2021)
Crossref Google Scholar
[225]
Li S, Duan C, Li X, Shao M, Qu C, Zhang D, Wang Q, Wang T, Zhang X. The effect of different layered materials on the tribological properties of PTFE composites. Friction 8(3): 542–552 (2020)
Crossref Google Scholar
[226]
Chen B, Zhang M, Zhang K, Dong Z, Li J, Zhao G. Mono-dispersed Ag nanoparticles decorated graphitic carbon nitride: An excellent lubricating additive as PPESK composite film. Friction 10(5): 717–731 (2022)
Crossref Google Scholar
[227]
Ren Y L, Zhang L, Xie G X, Li Z B, Chen H, Gong H J, Xu W H, Guo D, Luo J B. A review on tribology of polymer composite coatings. Friction 9(3): 429–470 (2021)
Crossref Google Scholar
[228]
Zhang J, Ueda M, Campen S, Spikes H. Boundary friction of ZDDP tribofilms. Tribol Lett 69(1): 8 (2021)
Crossref Google Scholar
[229]
Bai Y, Liu M, Li J, Guo Y. Tribofilm formation on the VN/7075 composite surface under sulfur-containing boundary lubrication. Proc Inst Mech Eng Part J 234(11): 1726–1734 (2020)
Crossref Google Scholar
[230]
Zhao Q, Li Y, Wu X, Ma R, Zhao G, Wang X. A tribological study of DIPE esters containing ionic liquids as high temperature and heavy load lubricants. Tribol Int 142: 105971 (2020)
Crossref Google Scholar
[231]
Yi S, Li J, Liu Y, Ge X, Zhang J, Luo J. In-situ formation of tribofilm with Ti3C2Tx MXene nanoflakes triggers macroscale superlubricity. Tribol Int 154: 106695 (2021)
Crossref Google Scholar
[232]
Erck R A, Song M, Li D, Cosimbescu L. Investigations of polymethacrylate tribochemical films using X-Ray spectroscopy and optical profilometry. Tribol Lett 69(1): 26 (2021)
Crossref Google Scholar
[233]
Ueda M, Kadiric A, Spikes H. Influence of steel surface composition on ZDDP tribofilm growth using ion implantation. Tribol Lett 69(2): 62 (2021)
Crossref Google Scholar
[234]
Vyavhare K, Timmons R B, Erdemir A, Aswath P B. Tribological interaction of plasma-functionalized CaCO3 nanoparticles with zinc and ashless dithiophosphate additives. Tribol Lett 69(2): 49 (2021)
Crossref Google Scholar
[235]
Mittal P, Rai H, Gosvami N N. Microscopic tribology of ADC12 alloy under lubricant containing ZDDP and MoDTC using in situ AFM. Tribol Lett 69(2): 35 (2021)
Crossref Google Scholar
[236]
Choudhury D, Niyonshuti I I, Chen J, Goss J A, Zou M. Tribological performance of polydopamine plus Ag nanoparticles/PTFE thin films. Tribol Int 144: 106097 (2020)
Crossref Google Scholar
[237]
Zhao Z, Ju P, Ji L, Chen L, Wu Y, Zhou H, Chen J. Structure optimization of epoxy-functionalized polysiloxanes and tribological properties of the polysiloxane/molybdenum disulfide lubricating coating for low-earth orbit environment. Tribol Int 162: 107135 (2021)
Crossref Google Scholar
[238]
Yu H L, Wang H M, Yin Y L, Song Z Y, Zhou X Y, Ji X C, Wei M, Shi P J, Bai Z M, Zhang W. Tribological behaviors of natural attapulgite nanofibers as an additive for mineral oil investigated by orthogonal test method. Tribol Int 153: 106562 (2021)
Crossref Google Scholar
[239]
Wang J, Ren S, Li Z, Wang C, Huang X, Fu C, Zheng L, Ren T. Tribological behavior of a novel organic molybdenum containing mercaptotriazine as a multifunctional environmentally friendly additive. Tribol Int 159: 106988 (2021)
Crossref Google Scholar
[240]
Shaigan N, Neill W S, Littlejohns J, Song D, Lafrance S. Adsorption of lubricity improver additives on sliding surfaces. Tribol Int 141: 105920 (2021)
Crossref Google Scholar
[241]
Gu Y, Wang Z, Peng S, Ma T, Luo J. Quantitative measurement of transfer film thickness of PTFE based composites by infrared spectroscopy. Tribol Int 153: 106593 (2021)
Crossref Google Scholar
[242]
Yang X, Liu X, Liu H, Politis D J, Leyvraz D, Wang L. Experimental and modelling study of friction evolution and lubricant breakdown behaviour under varying contact conditions in warm aluminium forming processes. Tribol Int 158: 106934 (2021)
Crossref Google Scholar
[243]
Rebenda D, Vrbka M, Nečas D, Toropitsyn E, Yarimitsu S, Čípek P, Pravda M, Hartl M. Rheological and frictional analysis of viscosupplements towards improved lubrication of human joints. Tribol Int 158: 107030 (2021)
Crossref Google Scholar
[244]
Lin C, Wan H, Kaper H J, Sharma P K. A hyaluronic acid based lubricious coating for cardiovascular catheters. Tribol Int 151: 106495 (2021)
Crossref Google Scholar
[245]
Wang Z, Li J, Liu Y, Luo J. Synthesis and characterizations of zwitterionic copolymer hydrogels with excellent lubrication behavior. Tribol Int 143: 106026 (2020)
Crossref Google Scholar
[246]
Duc T M, Long T T, Tuan N M. Novel uses of Al2O3/MoS2 hybrid nanofluid in MQCL hard milling of hardox 500 steel. Lubricants 9(4): 45 (2021)
Crossref Google Scholar
[247]
Bertolini R, Ghiotti A, Bruschi S. Graphene nanoplatelets as additives to MQL for improving tool life in machining Inconel 718 alloy. Wear 476: 203656 (2021)
Crossref Google Scholar
[248]
Wu H, Xiong S, Lin W, Kong F X. Study on tribological behavior, lubrication and anti-corrosion properties of W/O microemulsion for cold rolling of copper strip . Ind Lubr Tribol 73(4): 554–562 (2021)
Crossref Google Scholar
[249]
Sethupathi B P, Chandradass J. Comparative study of different solid lubricants towards friction stability in a non-asbestos disc brake pad. Ind Lubr Tribol 73(6): 897–903 (2021)
Crossref Google Scholar
[250]
Shah P, Gadkari A, Sharma A, Shokrani A, Khanna N. Comparison of machining performance under MQL and ultra-high voltage EMQL conditions based on tribological properties. Tribol Int 153: 106595 (2021)
Crossref Google Scholar
[251]
Karagöz Z B A, Demirtaş S, Kaleli H, Yüksek L, Çıtak E. Review of tribological behavior of graphene coatings on piston rings in engines. Ind Lubr Tribol 72(2): 243–254 (2021)
Crossref Google Scholar
[252]
Zhang S, Jiang S, Lin X. Static and dynamic characteristics of high-speed water-lubricated spiral-groove thrust bearing considering cavitating and centrifugal effects. Tribol Int 145: 106159 (2020)
Crossref Google Scholar
[253]
Zhang J, Liu B, Tian Y, Wang F, Chen Q, Zhang F, Qian H, Ma L. Facile one-step method to fabricate a slippery lubricant-infused surface (LIS) with self-replenishment properties for anti-icing applications. Coatings 10(2): 119 (2020)
Crossref Google Scholar
[254]
Xiao B, Zheng X, Zhou Y, Yao D, Wan Y. Tribological behaviors of the water-lubricated rubber bearings under different lubricated conditions. Ind Lubr Tribol 73(2): 260–265 (2021)
Crossref Google Scholar
[255]
Rogers S R, Bowden D, Unnikrishnan R, Scenini F, Preuss M, Stewart D, Dini D, Dye D. The interaction of galling and oxidation in 316L stainless steel. Wear 450–451: 204234 (2020)
Crossref Google Scholar
[256]
Yagi K, Izumi T, Koyamachi J, Sanda S, Yamaguchi S, Satio K, Tohyama M, Sugimura J. In situ observation of crystal grain orientation during scuffing process of steel surface using synchrotron X-ray diffraction. Tribol Lett 68(4): 115 (2020)
Crossref Google Scholar
[257]
Riggs M R, Murthy N K, Berkebile S P, Korenyi-Both A L. Scuffing resistance and starved lubrication behavior in helicopter gear steels coated with nanocomposite surface coatings with and without a hard sublayer. Tribol Trans 63(4): 610–620 (2020)
Crossref Google Scholar
[258]
Handschuh M J, Kahraman A, Anderson N E. Development of a high-speed two-disc tribometer for evaluation of traction and scuffing of lubricated contacts. Tribol Trans 63(3): 509–518 (2020)
Crossref Google Scholar
[259]
Boidi G, Krenn S, Eder S J. Identification of a material–lubricant pairing and operating conditions that lead to the failure of porous journal bearing systems. Tribol Lett 68(4): 108 (2020)
Crossref Google Scholar
[260]
Morales-Espejel G E, Brizmer V. Effect of materials and surfaces on frictional heating resistance of high-speed high-load rolling bearings. Proc Inst Mech Eng, Part J 236(4): 583–594 (2021)
Crossref Google Scholar
[261]
Cao H, Tian Y, Meng Y G. A fracture-induced adhesive wear criterion and its application to the simulation of wear process of the point contacts under mixed lubrication condition. FU Mech Eng 19(1): 23 (2021)
Crossref Google Scholar
[262]
Ueda M, Matsuda K. Effects of carbon content and hardness on rolling contact fatigue resistance in heavily loaded pearlitic rail steels. Wear 444–445: 203120 (2020)
Crossref Google Scholar
[263]
Hu Y, Guo L C, Maiorino M, Liu J P, Ding H H, Lewis R, Meli E, Rindi A, Liu Q Y, Wang W J. Comparison of wear and rolling contact fatigue behaviours of bainitic and pearlitic rails under various rolling-sliding conditions. Wear 460–461: 203455 (2020)
Crossref Google Scholar
[264]
Zeng D, Xu T, Liu W, Lu L, Zhang J, Gong Y. Investigation on rolling contact fatigue of railway wheel steel with surface defect. Wear 446–447: 203207 (2020)
Crossref Google Scholar
[265]
Liu C P, Ren R M, Liu D Y, Zhao X J, Chen C H. An EBSD investigation on the evolution of the surface microstructure of D2 wheel steel during rolling contact fatigue. Tribol Lett 68(1): 47 (2020)
Crossref Google Scholar
[266]
Lorenz S J, Sadeghi F, Trivedi H K, Kirsch M S, Wang C. Effects of grain refinement on rolling contact fatigue in bearing contacts. J Tribol 143(12): 121201 (2021)
Crossref Google Scholar
[267]
Loos J, Bergmann I, Goss M. Influence of high electrical currents on WEC formation in rolling bearings. Tribol Trans 64(4): 708–720 (2021)
Crossref Google Scholar
[268]
Linzmayer M, Sous C, Gutiérrez Guzmán F, Jacobs G. Interlaboratory comparison: Round robin test for the damage reproduction of white etching crack in cylindrical roller thrust bearings. Wear 480–481: 203925 (2021)
Crossref Google Scholar
[269]
Liu X, Wang P. Investigation of the generation mechanism of rail corrugation based on friction induced torsional vibration. Wear 468–469: 203593 (2021)
Crossref Google Scholar
[270]
Chen H, Furuya T, Fukagai S, Saga S, Ikoma J, Kimura K, Suzumura J. Wheel slip/slide and low adhesion caused by fallen leaves. Wear 446–447: 203187 (2020)
Crossref Google Scholar
[271]
Hu Y, Zhou L, Ding H H, Lewis R, Liu Q Y, Guo J, Wang W J. Microstructure evolution of railway pearlitic wheel steels under rolling-sliding contact loading. Tribol Int 154: 106685 (2021)
Crossref Google Scholar
[272]
Zhu Q, Chen G X, Kang X, Ren W J. Effect of wheel structure on friction-induced wheel polygonal wear of high-speed train. Tribol Trans 64(4): 606–615 (2021)
Crossref Google Scholar
[273]
Faccoli M, Provezza L, Petrogalli C, Ghidini A, Mazzù A. A small-scale experimental study of the damage due to intermittent shoe braking on the tread of high-speed train wheels. Tribol Trans 63(6): 1041–1050 (2020)
Crossref Google Scholar
[274]
Zhang G, Liu C, Ren R, Wu S, Yin H, Cong T, Li X. Effect of nonuniform microstructure on wear property of ER8 wheel steel. Wear 458–459: 203416 (2020)
Crossref Google Scholar
[275]
Steenbergen M. On the genesis of squat-type defects on rails–toward a unified explanation. Wear 478–479: 203906 (2021)
Crossref Google Scholar
[276]
Kadivar E, Moctar O e, Skoda R, Löschner U. Experimental study of the control of cavitation-induced erosion created by collapse of single bubbles using a micro structured riblet. Wear 486–487: 204087 (2021)
Crossref Google Scholar
[277]
ElJersifi A, Chbihi A, Semlal N, Bouaouine H, Naamane S. Failure analysis of a high chromium carbon steel impeller operating in phosphoric acid slurry. Wear 476: 203660 (2021)
Crossref Google Scholar
[278]
Brunhart M, Soteriou C, Daveau C, Gavaises M, Koukouvinis P, Winterbourn M. Cavitation erosion risk indicators for a thin gap within a diesel fuel pump. Wear 442–443: 203024 (2020)
Crossref Google Scholar
[279]
Elemuren R, Evitts R, Oguocha I N A, Kennell G, Gerspacher R, Odeshi A G. Full factorial, microscopic and spectroscopic study of erosion-corrosion of AISI 1018 steel elbows in potash brine-sand slurry. Tribol Int 142: 105989 (2020)
Crossref Google Scholar
[280]
Santos L L, Cardoso R P, Brunatto S F. Direct correlation between martensitic transformation and incubation-acceleration transition in solution-treated AISI 304 austenitic stainless steel cavitation. Wear 462–463: 203522 (2020)
Crossref Google Scholar
[281]
Ma D, Harvey T J, Zhuk Y N, Wellman R G, Wood R J K. Cavitation erosion performance of CVD W/WC coatings. Wear 452–453: 203276 (2020)
Crossref Google Scholar
[282]
Chen W, Yu Y, Tieu A K, Hao J, Wang L, Zhu S, Yang J. Microstructure, mechanical properties and tribological behavior of the low-pressure cold sprayed tin bronze-alumina coating in artificial seawater. Tribol Int 142: 105992 (2020)
Crossref Google Scholar
[283]
Huttunen-Saarivirta E, Heino V, Isotahdon E, Kilpi L, Ronkainen H. Tribocorrosion behaviour of thermally sprayed cermet coatings in paper machine environment. Tribol Int 142: 106006 (2020)
Crossref Google Scholar
[284]
Sun Y, Bailey R. Effect of applied cathodic potential on friction and wear behavior of CoCrMo alloy in NaCl solution. Lubricants 8(11): 101 (2020)
Crossref Google Scholar
[285]
Du C, Bai X, Yuan C. Fretting tribocorrosion behaviors of marine mooring chain steel 22MnCrNiMo in artificial seawater. J Tribol 143(7): 071701 (2021)
Crossref Google Scholar
[286]
Merstallinger A, Holzbauer R, Bamsey N. Cold welding in hold down points of space mechanisms due to fretting when omitting grease. Lubricants 9(8): 72 (2021)
Crossref Google Scholar
[287]
Blades L, Hills D, Nowell D, Evans K E, Smith C. An exploration of debris types and their influence on wear rates in fretting. Wear 450–451: 203252 (2020)
Crossref Google Scholar
[288]
Lee Y H, Kim I H, Kim H K, Kim H G. Role of ZrO2 oxide layer on the fretting wear resistance of a nuclear fuel rod. Tribol Int 145: 106146 (2020)
Crossref Google Scholar
[289]
Liu J, Mi X, Hu H, Long L, Cai Z, Peng J, Zhu M. Loosening behaviour of threaded fasteners under cyclic shear displacement. Wear 460–461: 203453 (2020)
Crossref Google Scholar
[290]
Sun S, Li L, Yue Z, Yang W, He K, Li S. Fretting fatigue failure behavior of nickel-based single crystal superalloy dovetail specimen in contact with powder metallurgy pads at high temperature. Tribol Int 142: 105986 (2020)
Crossref Google Scholar
[291]
Juoksukangas J, Hintikka J, Lehtovaara A, Mäntylä A, Vaara J, Frondelius T. Avoiding the initial adhesive friction peak in fretting. Wear 460–461: 203353 (2020)
Crossref Google Scholar
[292]
Liskiewicz T W, Kubiak K J, Mann D L, Mathia T G. Analysis of surface roughness morphology with TRIZ methodology in automotive electrical contacts: Design against third body fretting-corrosion. Tribol Int 143: 106019 (2020)
Crossref Google Scholar
[293]
Shipway P H. Time-dependence and exposure-dependence of material removal rates in fretting. Wear 477: 203826 (2021)
Crossref Google Scholar
[294]
Baêta D A, Costa D J R, Cardoso F G, Medeiros N. Evaluation of fretting wear occurrence on the surface of nuclear fuel rods of Zr–1Nb–1Sn-0.1Fe alloy: Effects of assembly misalignment and grid spring loading. Wear 460–461: 203422 (2020)
Crossref Google Scholar
[295]
Xu Z, Peng J, Liu J, Liu X, Zhang W, Zhu M. Study on tribo-chemical and fatigue behavior of 316L austenitic stainless steel in torsional fretting fatigue. Proc Inst Mech Eng, Part J 234(1): 84–93 (2019)
Crossref Google Scholar
[296]
Almeida G M J, Pessoa G C V, Cardoso R A, Castro F C, Araújo J A. Investigation of crack initiation path in AA7050-T7451 under fretting conditions. Tribol Int 144: 106103 (2020)
Crossref Google Scholar
[297]
de Pannemaecker A, Attia H, Williams G. Characterization of the fretting wear damage under random excitation. Wear 476: 203637 (2021)
Crossref Google Scholar
[298]
Johansson P, Marklund P, Björling M, Shi Y. Effect of humidity and counterface material on the friction and wear of carbon fiber reinforced PTFE composites. Tribol Int 157: 106869 (2021)
Crossref Google Scholar
[299]
Alam K I, Dorazio A, Burris D L. Polymers tribology exposed: Eliminating transfer film effects to clarify ultralow wear of PTFE. Tribol Lett 68(2): 67 (2020)
Crossref Google Scholar
[300]
Sun W, Liu X, Liu K, Xu J, Wang W, Ye J. Paradoxical filler size effect on composite wear: Filler–matrix interaction and its tribochemical consequences. Tribol Lett 68(4): 131 (2020)
Crossref Google Scholar
[301]
Zhang Z, Jia X, Guo F, Shan Z, Wang Y. Effect of contact forms on the wear of hard silicon surfaces by soft polymers. Friction 9(5): 918–928 (2020)
Crossref Google Scholar
[302]
Shabbir S, Garvey S D, Dakka S M, Rothwell B C, Su R, Leach R, Weston N. Analysis of the tribological interaction of a polytetrafluoroethylene-lined radial lip oil seal, shaft and lubricant sample. Proc Inst Mech Eng, Part J 236(1): 123–143 (2021)
Crossref Google Scholar
[303]
Jiang Y, Chen L, Xiao C, Zhou N, Qing T, Qian L. Friction and wear behaviors of steel ball against Polyimide-PTFE composite under rolling-sliding motion. Tribol Lett 69(3): 100 (2021)
Crossref Google Scholar
[304]
Hale J, Lewis R, Carré M J. Rubber friction and the effect of shape. Tribol Int 141: 105911 (2020)
Crossref Google Scholar
[305]
Qin K, Zhou Q, Zhang K, Li S, Lv M, Xia B, Bai S. Differences in wear tongue development: Thermal degrade effect on the tribological behavior of FKM O-ring seals. Tribol Lett 69(4): 125 (2021)
Crossref Google Scholar
[306]
Nishi T, Yamaguchi T, Shibata K, Hokkirigawa K. Influence of unforced dewetting and enforced wetting on real contact formation and friction behavior between rubber hemisphere and glass plate during contacting and sliding processes. Tribol Int 141: 105921 (2020)
Crossref Google Scholar
[307]
Runge S, Ignatyev P A, Wangenheim M, Bederna C, Wies B, Wallaschek J. Transient abrasion on a rubber sample due to highly dynamic contact conditions. Wear 477: 203848 (2021)
Crossref Google Scholar
[308]
Shen M X, Li B, Ji D H, Xiong G Y, Zhao L Z, Zhang J, Zhang Z N. Effect of particle size on tribological properties of rubber/steel seal pairs under contaminated water lubrication conditions. Tribol Lett 68(1): 40 (2020)
Crossref Google Scholar
[309]
Rudge R E D, Scholten E, Dijksman J A. Natural and induced surface roughness determine frictional regimes in hydrogel pairs. Tribol Int 141: 105903 (2020)
Crossref Google Scholar
[310]
Jay L, Kanda K, Kapsa P, Zahouani H, Adachi K. Effect of double network hydrogel film thickness on the run-in tribological properties of a friction system using DN gel. Wear 484–485: 203725 (2021)
Crossref Google Scholar
[311]
Ciavarella M. Universal features in “stickiness” criteria for soft adhesion with rough surfaces. Tribol Int 146: 106031 (2020)
Crossref Google Scholar
[312]
Nakano T, Hagihara K, Ribeiro A R, Fujii Y, Todo T, Fukushima R, Rocha L A. Orientation dependence of the wear resistance in the Co–Cr–Mo single crystal. Wear 478–479: 203758 (2021)
Crossref Google Scholar
[313]
Xiong S, Smith R, Schreck E, Dai Q. Experimental study of material pick up on heat-assisted magnetic recording (HAMR) heads. Tribol Lett 69(2): 77 (2021)
Crossref Google Scholar
[314]
Blau P J. Transitions in the sliding wear mechanisms of binary Cu–Al alloys having a range of solute contents and microstructures. Wear 476: 203681 (2021)
Crossref Google Scholar
[315]
Takagi K, Hashamova E, Dienwiebel M, Mine Y, Takashima K. Correlation of wear behaviour and microstructural evolution in Mg–Zn–Y alloys with long-period stacking ordered phase. Wear 482–483: 203983 (2021)
Crossref Google Scholar
[316]
Zugelj B B, Kalin M. Submicron-scale experimental analyses of the multi-asperity contact behaviour of various steels, an aluminium alloy and a polymer. Tribol Int 141: 105955 (2020)
Crossref Google Scholar
[317]
Aleksejev J, Clark Z, Huber J E, Hills D A. Experimental investigation of debris entrapment in annular contacts. Proc Inst Mech Eng, Part J 235(4): 687–697 (2020)
Crossref Google Scholar
[318]
Hsia F, Elam F M, Bonn D, Weber B, Franklin S E. Wear particle dynamics drive the difference between repeated and non-repeated reciprocated sliding. Tribol Int 142: 105983 (2020)
Crossref Google Scholar
[319]
Lyu Y, Leonardi M, Wahlström J, Gialanella S, Olofsson U. Friction, wear and airborne particle emission from Cu-free brake materials. Tribol Int 141: 105959 (2020)
Crossref Google Scholar
[320]
Cappella B, Reichelt M. Origin of lognormal distribution of wear coefficient values. Tribol Int 164: 107207 (2021)
Crossref Google Scholar
[321]
Pereira J I, Tressia G, Machado P C, Sinatora A, Souza R M. Multi-pass scratch test on pearlitic steel: Phase identification and crystallographic orientation analysis of the sub-surface layers. Wear 472–473: 203625 (2021)
Crossref Google Scholar
[322]
Xia W, Dehm G, Brinckmann S. Investigation of single asperity wear at the microscale in an austenitic steel. Wear 452–453: 203289 (2020)
Crossref Google Scholar
[323]
Tsybenko H, Xia W, Dehm G, Brinckmann S. On the commensuration of plastic plowing at the microscale. Tribol Int 151: 106477 (2020)
Crossref Google Scholar
[324]
Duan N, Yu Y, Shi W, Xiao Q, Liu Q. Investigation on diamond damaged process during a single-scratch of single crystal silicon carbide. Wear 486–487: 204099 (2021)
Crossref Google Scholar
[325]
Wang J, Yan Y, Chang S, Wang T, Geng Y, Gan Y. Study of the formation mechanism of bundle structures using AFM tip-based nanoscratching approach. Tribol Int 142: 106000 (2020)
Crossref Google Scholar
[326]
Mishra T, de Rooij M, Shisode M, Hazrati J, Schipper D J. A material point method based ploughing model to study the effect of asperity geometry on the ploughing behaviour of an elliptical asperity. Tribol Int 142: 106017 (2020)
Crossref Google Scholar
[327]
Casamassa E, Fioravanti A, Mazzocchi M, Carotta M C, Faga M G. Abrasive properties of ZnO: Influence of different nanoforms. Tribol Int 142: 105984 (2020)
Crossref Google Scholar
[328]
Esteves P J, Seriacopi V, de Macêdo M C S, Souza R M, Scandian C. Combined effect of abrasive particle size distribution and ball material on the wear coefficient in micro-scale abrasive wear tests. Wear 476: 203639 (2021)
Crossref Google Scholar
[329]
Saha G, Valtonen K, Saastamoinen A, Peura P, Kuokkala V-T. Impact-abrasive and abrasive wear behavior of low carbon steels with a range of hardness-toughness properties. Wear 450–451: 203263 (2020)
Crossref Google Scholar
[330]
Kostryzhev A G, Killmore C R, Yu D, Pereloma E V. Martensitic wear resistant steels alloyed with titanium. Wear 446–447: 203203 (2020)
Crossref Google Scholar
[331]
Haiko O, Javaheri V, Valtonen K, Kaijalainen A, Hannula J, Kömi J. Effect of prior austenite grain size on the abrasive wear resistance of ultra-high strength martensitic steels. Wear 454–455: 203336 (2020)
Crossref Google Scholar
[332]
Sep J, Galda L, Oliwa R, Dudek K. Surface layer analysis of helical grooved journal bearings after abrasive tests. Wear 448–449: 203233 (2020)
Crossref Google Scholar
[333]
Sousa J M S d, Ratusznei F, Pereira M, Castro R d M, Curi E I M. Abrasion resistance of Ni–Cr–B–Si coating deposited by laser cladding process. Tribol Int 143: 106002 (2020)
Crossref Google Scholar
[334]
Moghaddam P V, Hardell J, Vuorinen E, Prakash B. Dry sliding wear of nanostructured carbide-free bainitic steels–effect of oxidation-dominated wear. Wear 454–455: 203317 (2020)
Crossref Google Scholar
[335]
Savchenko N L, Mirovoy Y A, Buyakov A S, Burlachenko A G, Rudmin M A, Sevostyanova I N, Buyakova S P, Tarasov S Y. Adaptation and self-healing effect of tribo-oxidizing in high-speed sliding friction on ZrB2–SiС ceramic composite. Wear 446–447: 203204 (2020)
Crossref Google Scholar
[336]
Senge M, Steger J, Rienäcker A, Brückner-Foit A. Oxidative damage of a superalloy in high-loaded contacts. Lubricants 8(1): 4 (2019)
Crossref Google Scholar
[337]
Mallach D, Pape F, Lipinsky D, Arlinghaus H F. TOF-SIMS analysis of boundary layers formed under zinc-free antiwear. Ind Lubr Tribol 72(8): 1013–1017 (2020)
Crossref Google Scholar
[338]
Yin Y L, Yu H L, Wang H M, Song Z Y, Zhang Z, Ji X C, Cui T H, Wei M, Zhang W. Friction and wear behaviors of steel/bronze tribopairs lubricated by oil with serpentine natural mineral additive. Wear 456–457: 203387 (2020)
Crossref Google Scholar
[339]
Xie H, Jin Y, Niu M, Liu N, Wang J. Effect of tribofilm induced by nanoparticle addition on wear behavior of titanium-matrix composite. Tribol Lett 69(1): 18 (2021)
Crossref Google Scholar
[340]
Esfahani E A, Soltanahmadi S, Morina A, Han B, Nedelcu I, van Eijk M C P, Neville A. The multiple roles of a chemical tribofilm in hydrogen uptake from lubricated rubbing contacts. Tribol Int 146: 106023 (2020)
Crossref Google Scholar
[341]
Moghadam M, Villa M, Moreau P, Dubois A, Dubar L, Nielsen C V, Bay N. Analysis of lubricant performance in punching and blanking. Tribol Int 141: 105949 (2020)
Crossref Google Scholar
[342]
Mekicha M A, de Rooij M B, Mishra T, Matthews D T A, Jacobs L, Schipper D J. Study of wear particles formation at single asperity contact: An experimental and numerical approach. Wear 470–471: 203644 (2021)
Crossref Google Scholar
[343]
Yang X, Hu Y, Zhang L, Zheng Y, Politis D J, Liu X, Wang L. Experimental and modelling study of interaction between friction and galling under contact load change conditions. Friction 10(3): 454–472 (2021)
Crossref Google Scholar
[344]
Fang S, Bähre D, Llanes L. Assessment of wear micromechanisms on a laser textured cemented carbide tool during abrasive-like machining by FIB/FESEM. Friction 9(3): 656–664 (2020)
Crossref Google Scholar
[345]
Alammari Y, Iovkov I, Berger S, Saelzer J, Biermann D. Adhesion area estimation using backscatter image gray level masking of uncoated tungsten carbide tools. Wear 476: 203666 (2021)
Crossref Google Scholar
[346]
Xiao C, Deng C, Zhang P, Qian L, Kim S H. Interplay between solution chemistry and mechanical activation in friction-induced material removal of silicon surface in aqueous solution. Tribol Int 148: 106319 (2020)
Crossref Google Scholar
[347]
Zhang S, Guo X, Jin Z, Kang R, Guo D. Material removal characteristics of precorroded Lu2O3 laser crystals and elastic deformation model during nanoscratch process. Tribol Int 143: 106027 (2020)
Crossref Google Scholar
[348]
Guo J, Gong J, Shi P, Xiao C, Jiang L, Chen L, Qian L. Study on the polishing mechanism of pH-dependent tribochemical removal in CMP of CaF2 crystal. Tribol Int 150: 106370 (2020)
Crossref Google Scholar
[349]
Zhang P, Chen G, Ni Z, Wang Y, Teng K, Qian S, Bian D, Zhao Y. The effect of Cu2+ ions and glycine complex on chemical mechanical polishing (CMP) performance of SiC substrates. Tribol Lett 69(3): 94 (2021)
Crossref Google Scholar
[350]
Guo J, Xiao C, Gao J, Li G, Wu H, Chen L, Qian L. Interplay between counter-surface chemistry and mechanical activation in mechanochemical removal of N-faced gan surface in humid ambient. Tribol Int 159: 107004 (2021)
Crossref Google Scholar
[351]
He Y, Yuan Z, Cheng K, Duan Z, Zhao W. Development of electrical enhanced photocatalysis polishing slurry for silicon carbide wafer. Proc Inst Mech Eng, Part J 234(3): 401–413 (2019)
Crossref Google Scholar
[352]
Faller J, Scherge M. The identification of an adequate stressing level to find the proper running-in conditions of a lubricated DLC-metal-system. Lubricants 8(9): 88 (2020)
Crossref Google Scholar
[353]
Pham-Ba S, Molinari J-F. Creation and evolution of roughness on silica under unlubricated wear. Wear 472–473: 203648 (2021)
Crossref Google Scholar
[354]
He P, Lu S, Wang Y, Li R, Li F. Analysis of the best roughness surface based on the bearing area curve theory. Proc Inst Mech Eng, Part J 236(3): 527–540 (2021)
Crossref Google Scholar
[355]
Prajapati D K, Tiwari M. The correlation between friction coefficient and areal topography parameters for AISI 304 steel sliding against AISI 52100 steel. Friction 9(1): 41–60 (2020)
Crossref Google Scholar
[356]
Linjamaa A, Lehtovaara A, Kallio M, Léger A. Running-in effects on friction of journal bearings under slow sliding speeds. Proc Inst Mech Eng, Part J 234(3): 362–372 (2019)
Crossref Google Scholar
[357]
Zambrano O A, Muñoz E C, Rodríguez S A, Coronado J J. Running-in period for the abrasive wear of austenitic steels. Wear 452–453: 203298 (2020)
Crossref Google Scholar
[358]
Dryzek J, Wróbel M. Detection of dynamical recrystallization in a tribolayer of pure molybdenum using positron annihilation and EBSD techniques. Wear 466–467: 203524 (2021)
Crossref Google Scholar
[359]
Chen Y, Ren R, Zhao X, Chen C, Pan R. Study on the surface microstructure evolution and wear property of bainitic rail steel under dry sliding wear. Wear 448–449: 203217 (2020)
Crossref Google Scholar
[360]
Gao Q Y, Li S X, Su Y S, Cao J, Moliar O. Grain coarsening of nano laminated structure in martensite steel under sliding wear. Tribol Int 151: 106381 (2020)
Crossref Google Scholar
[361]
Heldin M, Heinrichs J, Jacobson S. On the critical roles of initial plastic deformation and material transfer on the sliding friction between metals. Wear 477: 203853 (2021)
Crossref Google Scholar
[362]
Liu C P, Liu P T, Pan J Z, Chen C H, Ren R M. Effect of pre-wear on the rolling contact fatigue property of D2 wheel steel. Wear 442–443: 203154 (2020)
Crossref Google Scholar
[363]
Dimić A, Vencl A, Ristivojević M, Mitrović R, Mišković Ž, Milivojević A. Influence of the running-in process on the working ability of contact surfaces in lubricated sliding conditions. Proc Inst Mech Eng, Part J 236(4): 691–700 (2021)
Crossref Google Scholar
[364]
Wu D, Guan Z, Cheng Q, Guo W, Tang M, Liu Y. Development of a friction test apparatus for simulating the ultra-high pressure environment of the deep ocean. Wear 452–453: 203294 (2020)
Crossref Google Scholar
[365]
Gammelgård A, Tuuf J, Strand A, Sundell M, Björklund-Sänkiaho M. A method for tribological measurements of coated abrasives using a rheometer. Tribol Lett 69(2): 53 (2021)
Crossref Google Scholar
[366]
Groucott S, Pugh K, Zekos I, M Stack M. A study of raindrop impacts on a wind turbine material: Velocity and impact angle effects on erosion maps at various exposure times. Lubricants 9(6): 60 (2021)
Crossref Google Scholar
[367]
Kvryan A, Carter N A, Trivedi H K, Hurley M F. Accelerated testing to investigate corrosion mechanisms of carburized and carbonitrided martensitic stainless steel for aerospace bearings in harsh environments. Tribol Trans 63(2): 265–279 (2019)
Crossref Google Scholar
[368]
Rastegaev I, Merson D, Rastegaeva I, Vinogradov A. A time-frequency based approach for acoustic emission assessment of sliding wear. Lubricants 8(5): 52 (2020)
Crossref Google Scholar
[369]
Oberle N, Amann T, Kürten D, Raga R, Kailer A. In-situ-determination of tribologically induced hydrogen permeation using electrochemical methods. Proc Inst Mech Eng, Part J 234(7): 1027–1034 (2019)
Crossref Google Scholar
[370]
Okubo H, Sasaki S, Lancon D, Jarnias F, Thiébaut B. Tribo-Raman-SLIM observation for diamond-like carbon lubricated with fully formulated oils with different wear levels at DLC/steel contacts. Wear 454–455: 203326 (2020)
Crossref Google Scholar
[371]
Liu Y, Ma G, Qin H, Han C, Shi J. Research on damage and failure behaviour of coated self-lubricating spherical plain bearings based on detection of friction torque and temperature rise. Proc Inst Mech Eng, Part J 236(3): 514–526 (2021)
Crossref Google Scholar
[372]
Hagemann T, Zemella P, Pfau B, Schwarze H. Experimental and theoretical investigations on transition of lubrication conditions for a five-pad tilting-pad journal bearing with eccentric pivot up to highest surface speeds. Tribol Int 142: 106008 (2020)
Crossref Google Scholar
[373]
Schneider T, Voelkel K, Pflaum H, Stahl K. Friction behavior of pre-damaged wet-running multi-plate clutches in an endurance test. Lubricants 8(7): 68 (2020)
Crossref Google Scholar
[374]
Buckley-Johnstone L E, Trummer G, Voltr P, Six K, Lewis R. Full-scale testing of low adhesion effects with small amounts of water in the wheel/rail interface. Tribol Int 141: 105907 (2020)
Crossref Google Scholar
[375]
Renhart P, Summer F, Grün F, Eder A. Close-to-application test methodology validated by a baseline study for novel bearing developments in aircraft turbines. Lubricants 8(1): 7 (2020)
Crossref Google Scholar
[376]
Xu M, Dai Q, Huang W, Wang X. Using magnetic fluids to improve the behavior of ball bearings under starved lubrication. Tribol Int 141: 105950 (2020)
Crossref Google Scholar
[377]
Radil K, Berkebile S. Failure progression of spur gears during a simulated loss-of-lubrication event in a rotorcraft drive system. Tribol Trans 63(4): 718–725 (2020)
Crossref Google Scholar
[378]
Georgiou E P, Lopes L M, De Bilde M, Drees D. How can we measure sliding wear in an efficient way? Wear 458–459: 203414 (2020)
Crossref Google Scholar
[379]
Abdullah M U, Khan Z A, Kruhoeffer W, Blass T, Vierneusel B. Development of white etching bands under accelerated rolling contact fatigue. Tribol Int 164: 107240 (2021)
Crossref Google Scholar
[380]
Cousseau T, Passos A G. Methodology for wear mapping error quantification. Ind Lubr Tribol 72(9): 1043–1050 (2020)
Crossref Google Scholar
[381]
Kraus M, Lenzen M, Merklein M. Contact pressure-dependent friction characterization by using a single sheet metal compression test. Wear 476: 203679 (2021)
Crossref Google Scholar
[382]
Zhang Y, Purssell C, Mao K, Leigh S. A physical investigation of wear and thermal characteristics of 3D printed nylon spur gears. Tribol Int 141: 105953 (2020)
Crossref Google Scholar
[383]
Yaqub T B, Bruyere S, Pierson J-F, Vuchkov T, Cavaleiro A. Insights into the wear track evolution with sliding cycles of carbon-alloyed transition metal dichalcogenide coatings. Surf Coat Technol 403: 126360 (2020)
Crossref Google Scholar
[384]
Fan B, Liu Y, Zhang C, Wang J, Zhang P, Mao J. A deposition rate-based index of debris concentration and its extraction method for online image visual ferrography. Tribol Trans 64(6): 1035–1045 (2021)
Crossref Google Scholar
[385]
Lin C L, Meehan P A. Morphological and elemental analysis of wear debris naturally formed in grease lubricated railway axle bearings. Wear 484–485: 203994 (2021)
Crossref Google Scholar
[386]
Woo S H, Kim Y, Lee S, Choi Y, Lee S. Characteristics of brake wear particle (BWP) emissions under various test driving cycles. Wear 480–481: 203936 (2021)
Crossref Google Scholar
[387]
Raadnui S. Condition monitoring of worm gear wear and wear particle analysis of industrial worm gear sets. Wear 476: 203687 (2021)
Crossref Google Scholar
[388]
Harris M D, Berkebile S P, Murthy N K, Voevodin A A. In-situ instrumentation to observe transient tribological effects in high sliding speed unlubricated contacts. Wear 442–443: 203111 (2020)
Crossref Google Scholar
[389]
Dalbert V, Mary N, Normand B, Verdu C, Saedlou S. In situ determinations of the wear surfaces, volumes and kinetics of repassivation: Contribution in the understanding of the tribocorrosion behaviour of a ferritic stainless steel in various pH. Tribol Int 150: 106374 (2020)
Crossref Google Scholar