AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Friction Article
PDF (2 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Short Communication | Open Access

Assessment of wear micromechanisms on a laser textured cemented carbide tool during abrasive-like machining by FIB/FESEM

Shiqi FANG1,2( ), Dirk BÄHRE1, Luis LLANES2
Institute of Production Engineering, Saarland University, Saarbrücken 66123, Germany
CIEFMA-Department of Materials Science and Engineering, EEBE-Campus Diagonal Besòs, Universitat Politècnica de Catalunya, Barcelona 08019, Spain
Show Author Information

Abstract

The combined use of focused ion beam (FIB) milling and field-emission scanning electron microscopy inspection (FESEM) is a unique and successful approach for assessment of near-surface phenomena at specific and selected locations. In this study, a FIB/FESEM dual-beam platform was implemented to docment and analyze the wear micromechanisms on a laser-surface textured (LST) hardmetal (HM) tool. In particular, changes in surface and microstructural integrity of the laser-sculptured pyramids (effective cutting microfeatures) were characterized after testing the LST-HM tool against a steel workpiece in a workbench designed to simulate an external honing process. It was demonstrated that: (1) laser-surface texturing does not degrade the intrinsic surface integrity and tool effectiveness of HM pyramids; and (2) there exists a correlation between the wear and loading of shaped pyramids at the local level. Hence, the enhanced performance of the laser-textured tool should consider the pyramid geometry aspects rather than the microstructure assemblage of the HM grade used, at least for attempted abrasive applications.

Keywords

focused ion beam (FIB)field-emission scanning electron microscopy inspection (FESEM)cemented carbideslaser surface texturingabrasive machining processeswear

References

【1】
【1】
 
 
Crossref Google Scholar
Friction
Volume 9 Issue 3,
June 2021
Pages 656-664
DOI: 10.1007/s40544-020-0422-z

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Cite this Report
Close
Close
Cite this article:
FANG S, BÄHRE D, LLANES L. Assessment of wear micromechanisms on a laser textured cemented carbide tool during abrasive-like machining by FIB/FESEM. Friction, 2021, 9(3): 656-664. https://doi.org/10.1007/s40544-020-0422-z

1275

Views

85

Downloads

3

Crossref

N/A

Web of Science

3

Scopus

0

CSCD
Received: 29 November 2019
Revised: 20 March 2020
Accepted: 07 May 2020
Published: 02 November 2020
© The author(s) 2020

This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.