Improvement of the lubrication properties of grease with Mn₃O₄/graphene (Mn₃O₄#G) nanocomposite additive

Although grease can effectively lubricate machines, lubrication failure may occur under high speed and heavy load conditions. In this study, Mn₃O₄/graphene nanocomposites (Mn₃O₄#G) were synthetized using a hydrothermal method as lubricant additives. The lubrication properties of compound grease with Mn₃O₄#G nanocomposite additive under heavy contact loads of 600-900 N (3.95-4.59 GPa) were investigated. First, the nanocomposites were dispersed into L-XBCEA 0 lithium grease via successive electromagnetic stirring, ultrasound vibration, and three-roll milling. Compound grease with additives of commercial graphene (Com#G) was also investigated for comparison. Tribological test results revealed that the trace amounts of Mn₃O₄#G (as low as 0.02 wt%) could reduce the coefficient of friction (COF) of grease significantly. When the concentration of Mn₃O₄#G was 0.1 wt%, the COF and wear depth were 43.5% and 86.1%, lower than those of pure graphene, respectively. In addition, under the effect of friction, the microstructure of graphene in Mn₃O₄#G nanocomposites tends to be ordered and normalized. Furthermore, most of the Mn₃O₄ transformed into Mn₂O₃ owing to the high temperature generated from friction. Using the Ar gas cluster ion beam sputtering method, the thickness of the tribofilm was estimated to be 25-34 nm. Finally, the improvement of the lubrication properties was attributed to the synergistic effect of the adsorbed tribofilm, i.e., the graphene island effect and the filling effect of Mn₃O₄#G.