AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Friction Article
PDF (26 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Conductive and tribological properties of TiN-Ag composite coatings under grease lubrication

Feihu LIN, Yanqiu XIA( ), Xin FENG
School of Energy Power and Mechanical Engineering, North China Electric Power University, Beijing 102206, China
Show Author Information

Abstract

TiN-Ag composite coatings were prepared by pulsed bias arc ion plating. X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDS) were applied to analyze the compositions of the coatings. Tribological properties of the coatings were studied using an MFT-R4000 ball-on-disk friction tester in the presence of lubricating greases containing multilayer graphene. Scanning electron microscopy (SEM), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS) were used to analyze the worn surface compositions of the lubricating films. The results show that with the decrease in Ag in the film, hardness increased but electrical conductivity decreased. The coating with 10 at% Ag content shows the best friction-reducing and anti-wear properties, which can be attributed to the moderate content of Ag embedded in the TiN crystal gap that enhanced the grain bonding force to improve the anti-wear and self-lubricating ability. Graphene can be adsorbed on the coating as a solid lubricant.

Keywords

tribologysilvercontact resistancelubricating grease

References

[1]
Slade P G. Electrical Contacts: Principles and Applications. New York (USA): CRC Press, 1999.
[2]
Cho K H, Hong U S, Lee K S, Jang H. Tribological properties and electrical signal transmission of copper-graphite composites. Tribol Lett 27(3): 301-306 (2007)
Google Scholar
[3]
Senouci A, Zaidi H, Frene J, Bouchoucha A, Paulmier D. Damage of surfaces in sliding electrical contact copper/ steel. Appl Surf Sci 144-145: 287-291 (1999)
Google Scholar
[4]
Liu X L, Cai Z B, He J F, Peng J F, Zhu M H. Effect of elevated temperature on fretting wear under electric contact. Wear 376-377: 643-655 (2017)
Google Scholar
[5]
Yang H J, Hu Y, Chen G X, Zhang W H, Wu G N. Correlation between the wear and vibration of the contact strip in a contact wire rubbing against a contact strip with electrical current. Tribol Trans 57(1): 86-93 (2014)
Google Scholar
[6]
Noël S, Correia S, Alamarguy D, Gendre P. Fretting behaviour of various intermetallic compounds in electrical contacts: Influence on reliability. Wear 271(9-10): 1515-1523 (2011)
Google Scholar
[7]
Antler M. Electrical effects of fretting connector contact materials: A review. Wear 106(1-3): 5-33 (1985)
Google Scholar
[8]
Myshkin N K. Tribological problems in electrical contacts. Tribol Int 24(1): 45-49 (1991)
Google Scholar
[9]
Babu S S, Santella M L, Feng Z, Riemer B W, Cohron J W. Empirical model of effects of pressure and temperature on electrical contact resistance of metals. Sci Technol Weld Join 6(3): 126-132 (2001)
Google Scholar
[10]
Rudolphi Å K, Jacobson S. Gross plastic fretting mechanical deterioration of silver coated electrical contacts. Wear 201(1-2): 244-254 (1996)
Google Scholar
[11]
Hasegawa M, Imai K, Makimoto J, Sawa K. An experimental study on operating characteristics of Ag, Pd and Cu contacts in argon atmosphere. In Proceedings of the Forty-ninth IEEE Holm Conference on Electrical Contacts, Washington, DC, USA, 2003: 190-197.
[12]
Khadem M, Penkov O V, Yang H, Kim D. Tribology of multilayer coatings for wear reduction: A review. Friction 5(3): 248-262 (2017)
Google Scholar
[13]
André B, Lewin E, Jansson U, Wiklund U. Friction and contact resistance of nanocomposite Ti-Ni-C coatings. Wear 270(9-10): 555-566 (2011)
Google Scholar
[14]
Wang P, Yue W, Lu Z B, Zhang G G, Zhu L N. Friction and wear properties of MoS2-based coatings sliding against Cu and Al under electric current. Tribol Int 127: 379-388 (2018)
Google Scholar
[15]
Lewin E, Olsson E, André B, Joelsson T, Öberg Å, Wiklund U, Ljungcrantz H, Jansson U. Industrialisation study of nanocomposite Nc-TiC/a-C coatings for electrical contact applications. Plasma Processes Polym 6(S1): S928-S934 (2009)
Google Scholar
[16]
Öberg Å, Kassman Å, André B, Wiklund U, Lindquist M, Lewin E, Jansson U, Högberg H, Joelsson T, Ljungcrantz H. Conductive nanocomposite ceramics as tribological and electrical contact materials. Eur Phys J Appl Phys 49(2): 22902 (2010)
Google Scholar
[17]
Ge X Y, Xia Y Q, Feng X. Influence of carbon nanotubes on conductive capacity and tribological characteristics of poly(ethylene glycol-ran-propylene glycol) monobutyl ether as base oil of grease. J Tribol 138(1): 011801 (2016)
Google Scholar
[18]
Cao Z F, Xia Y Q, Ge X Y. Conductive capacity and tribological properties of several carbon materials in conductive greases. Ind Lubricat Tribol 68(5): 577-585 (2016)
Google Scholar
[19]
Fan X Q, Xia Y Q, Wang L P. Tribological properties of conductive lubricating greases. Friction 2(4): 343-353 (2014)
Google Scholar
[20]
Wang Z Y, Xia Y Q, Liu Z L, Wen Z Z. Conductive lubricating grease synthesized using the ionic liquid. Tribol Lett 46(1): 33-42 (2012)
Google Scholar
[21]
Fan X Q, Wang L P, Xia Y Q. Oil-soluble lithium salts as novel lubricant additives towards improving conductivity and tribological performance of bentone grease. Lubricat Sci 27(6): 359-368 (2015)
Google Scholar
[22]
Fan X Q, Xia Y Q, Wang L P, Pu J B, Chen T D, Zhang H B. Study of the conductivity and tribological performance of ionic liquid and lithium greases. Tribol Lett 53(1): 281-291 (2014)
Google Scholar
[23]
Ge X Y, Xia Y Q, Shu Z Y. Conductive and tribological properties of lithium-based ionic liquids as grease base oil. Tribol Trans 58(4): 686-690 (2015)
Google Scholar
[24]
Ge X Y, Xia Y Q, Shu Z Y, Zhao X P. Erratum to: Conductive grease synthesized using nanometer ATO as an additive. Friction 3(4): 352 (2015)
Google Scholar
[25]
Jia Z F, Li H Q, Yao Z, Frazer L, Qian B S, Borguet E, Ren F, Dikin D A. Electrical and mechanical properties of poly(dopamine)-modified copper/reduced graphene oxide composites. J Mater Sci 52(19): 11620-11629 (2017)
Google Scholar
[26]
Jia Z F, Zhao P P, Ni J J, Shao X, Zhao L M, Huang B X, Ge B, Ban C L. The electrical conductivities and tribological properties of vacuum hot-pressed Cu/reduced graphene oxide composite. J Mater Eng Perform 26(9): 4434-4441 (2017)
Google Scholar
[27]
Cao Z F, Xia Y Q, Xi X. Nano-montmorillonite-doped lubricating grease exhibiting excellent insulating and tribological properties. Friction 5(2): 219-230 (2017)
Google Scholar
[28]
Chen J H, Xia Y Q, Hu Y C, Hou B Y. Tribological performance and conductive capacity of Ag coating under boundary lubrication. Tribol Int 110: 161-172 (2017)
Google Scholar
[29]
Zhang M. Honeycomb-like nanocomposite Ti-Ag-N films prepared by pulsed bias arc ion plating on titanium as bipolar plates for unitized regenerative fuel cells. J Power Sources 198: 196-202 (2012)
Google Scholar
[30]
Kelly P J, Li H, Benson P S, Whitehead K A, Verran J, Arnell R D, Iordanova I. Comparison of the tribological and antimicrobial properties of CrN/Ag, ZrN/Ag, TiN/Ag, and TiN/Cu nanocomposite coatings. Surf Coat Technol 205(5): 1606-1610 (2010)
Google Scholar
[31]
Ju H B, Yu L H, Yu D, Asempah I, Xu J H. Microstructure, mechanical and tribological properties of TiN-Ag films deposited by reactive magnetron sputtering. Vacuum 141: 82-88 (2017)
Google Scholar
[32]
Wang J, Guo X C, He Y, Jiang M J, Gu K C. Tribological characteristics of graphene as grease additive under different contact forms. Tribol Int 127: 457-469 (2018)
Google Scholar
[33]
Fan X Q, Xia Y Q, Wang L P, Li W. Multilayer graphene as a lubricating additive in bentone grease. Tribol Lett 55(3): 455-464 (2014)
Google Scholar
[34]
Praveena M, Guha K, Ravishankar A, Biswas S K, Bain C D, Jayaram V. Total internal reflection Raman spectroscopy of poly(alpha-olefin) oils in a lubricated contact. RSC Adv 4(42): 22205-22213 (2014)
Google Scholar
[35]
Yang G B, Zhang J F, Zhang S M, Yu L G, Zhang P Y, Zhu B L. Preparation of triazine derivatives and evaluation of their tribological properties as lubricant additives in poly-alpha olefin. Tribol Int 62: 163-170 (2013)
Google Scholar
[36]
Zhang M, Wang X B, Fu X S, Xia Y Q. Performance and anti-wear mechanism of CaCO3 nanoparticles as a green additive in poly-alpha-olefin. Tribol Int 42(7): 1029-1039 (2009)
Google Scholar
[37]
Jia Z F, Xia Y Q, Pang X J, Hao J Y. Tribological behaviors of different diamond-like carbon coatings on nitrided mild steel lubricated with benzotriazole-containing borate esters. Tribol Lett 41(1): 247-256 (2011)
Google Scholar
[38]
Mandrino D, Podgornik B. XPS investigations of tribofilms formed on CrN coatings. Appl Surf Sci 396: 554-559 (2017)
Google Scholar
[39]
Ray N, Kempf B, Mützel T, Froyen L, Vanmeensel K, Vleugels J. Effect of WC particle size and Ag volume fraction on electrical contact resistance and thermal conductivity of Ag-WC contact materials. Mater Des 85: 412-422 (2015)
Google Scholar
[40]
Mulligan C P, Gall D. CrN-Ag self-lubricating hard coatings. Surf Coat Technol 200(5-6): 1495-1500 (2005)
Google Scholar
[41]
Endrino J L, Nainaparampil J J, Krzanowski J E. Microstructure and vacuum tribology of TiC-Ag composite coatings deposited by magnetron sputtering-pulsed laser deposition. Surf Coat Technol 157(1): 95-101 (2002)
Google Scholar
[42]
Liu L, Shen H H, Liu X Z, Guo Q, Meng T X, Wang Z X, Yang H J, Liu X P. Wear resistance of TiN(Ti2N)/Ti composite layer formed on C17200 alloy by plasma surface Ti-alloying and nitriding. Appl Surf Sci 388: 103-108 (2016)
Google Scholar
[43]
Köstenbauer, H, Fontalvo G A, Mitterer C, Keckes J. Tribological properties of TiN/Ag nanocomposite coatings. Tribol Lett 30(1): 53-60 (2008)
Google Scholar
Friction
Volume 9 Issue 4,
August 2021
Pages 774-788
DOI: 10.1007/s40544-020-0373-4
Cite this article:
LIN F, XIA Y, FENG X. Conductive and tribological properties of TiN-Ag composite coatings under grease lubrication. Friction, 2021, 9(4): 774-788. https://doi.org/10.1007/s40544-020-0373-4

786

Views

36

Downloads

18

Crossref

N/A

Web of Science

23

Scopus

3

CSCD

Altmetrics
Received: 26 September 2019
Revised: 15 November 2019
Accepted: 16 February 2020
Published: 28 August 2020
© The author(s) 2020

This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Return