AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Home Friction Article
PDF (32.4 MB)
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Surface characterization of steel/steel contact lubricated by PAO6 with novel black phosphorus nanocomposites

Zhiheng LUO1, Jingyuan YU1, Yufu XU1( ), He XI1, Gang CHENG1, Lulu YAO2, Ruhong SONG1, Karl D DEARN3
Institute of Tribology, School of Mechanical Engineering, Hefei University of Technology, Hefei 230009, China
School of Chemistry and Chemical Engineering, Hefei University of Technology, Hefei 230009, China
Mason Institute of Tribology, School of Engineering, University of Birmingham, Edgbaston, Birmingham B152TT, United Kingdom
Show Author Information

Abstract

In the present work, two types of novel nano additives, titanium sulfonate ligand/black phosphorus (TiL4/BP) and titanium dioxide/black phosphorus (TiO2/BP) nanocomposites, were prepared. The tribological behavior of the steel/steel friction pairs lubricated by polyalphaolefins type 6 (PAO6) containing the nanocomposites under boundary lubrication was studied. The worn surfaces were analyzed using modern surface techniques. The experimental results show that the rubbed surfaces became smooth and showed little wear with the addition of the nanocomposites. TiO2/BP nanocomposites can significantly improve the lubricity of BP nanosheets under high contact stress. The synergistic roles of the load-bearing abilities and rolling effect of TiO2 nanoparticles, the slip induced by the BP with its layered structure, and the establishment of a tribofilm on the sliding interface are the basis of the tribological mechanisms.

References

【1】
【1】
 
 
Friction
Pages 723-733

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Close
Close
Cite this article:
LUO Z, YU J, XU Y, et al. Surface characterization of steel/steel contact lubricated by PAO6 with novel black phosphorus nanocomposites. Friction, 2021, 9(4): 723-733. https://doi.org/10.1007/s40544-020-0366-3

1718

Views

109

Downloads

54

Crossref

N/A

Web of Science

56

Scopus

5

CSCD

Received: 01 November 2019
Revised: 02 January 2020
Accepted: 01 February 2020
Published: 04 August 2020
© The author(s) 2020

This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.