AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Friction Article
PDF (4.3 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Analysis of the high-temperature dry sliding behavior of CoCrFeNiTi0.5Alx high-entropy alloys

Azmi ERDOĞAN1( ), Mustafa Sabri GÖK2, Sakin ZEYTIN3
 Department of Metallurgy and Materials Engineering, Faculty of Engineering, Bartın University, Bartın 74100, Turkey
 Department of Mechanical Engineering, Faculty of Engineering, Bartın University, Bartın 74100, Turkey
 Department of Metallurgy and Materials Engineering, Faculty of Engineering, Sakarya University, Sakarya 54100, Turkey
Show Author Information

Abstract

In this study, CoCrFeNiTi0.5Alx high-entropy alloys were produced by induction melting and their dry sliding wear behavior was examined at different temperatures. In addition to face-centered cubic (FCC) phases, low amounts of a tetragonal phase were detected in the microstructures of alloys without Al and microscratches were formed by wear particles on the worn surfaces of the alloy specimens. Two body-centered cubic (BCC) phases were detected in the alloy with 0.5Al and a fatigue-related extrusion wear mechanism was detected on the worn surface. The alloy specimen with a high Al content exhibited the best wear characteristics. No wear tracks were formed in single-phase BCC intermetallic alloys at room temperature and they exhibited a higher wear strength at high temperatures when compared to other samples.

Keywords

high-entropy alloydry sliding wearfrictionintermetallic

References

【1】
【1】
 
 
Crossref Google Scholar
Friction
Volume 8 Issue 1,
February 2020
Pages 198-207
DOI: 10.1007/s40544-019-0278-2

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Cite this Report
Close
Close
Cite this article:
ERDOĞAN A, Sabri GÖK M, ZEYTIN S. Analysis of the high-temperature dry sliding behavior of CoCrFeNiTi0.5Alx high-entropy alloys. Friction, 2020, 8(1): 198-207. https://doi.org/10.1007/s40544-019-0278-2

1138

Views

55

Downloads

59

Crossref

N/A

Web of Science

56

Scopus

6

CSCD
Received: 11 October 2018
Revised: 03 December 2018
Accepted: 13 January 2019
Published: 15 April 2019
© The author(s) 2019

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.