AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Friction Article
PDF (27.4 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Friction predication on pin-to-plate interface of PTFE material and steel

Zhuming BI1,2( ), Donald W. MUELLER1
Depatment of Civil and Mechnical Engineering, Purdue University Fort Wayne, Fort Wayne 2101E, USA
School of Mechanical and Electrical Engineering, GuangDong University of Technology, Guangzhou 510006, China
Show Author Information

Abstract

In this paper, the friction behavior at a pin-to-plate interface is investigated. The pin and plate are made of Polytetrafluoroethylene (PTFE) and steel, respectively, and there is a reciprocating motion at the interface. Governing mathematical models for the relations of design variables and frictions are investigated, and a general procedure is proposed to solve the developed models and predict the friction forces at the interface subjected to given test conditions. Novel models have been developed to represent intrigued friction behaviors affected by various factors such as pin geometrics and finishes, lubrication conditions, and reciprocating speed. The test data from experiments is used to verify the effectiveness of the proposed models.

Keywords

pin-to-platefrictionwearcoefficient of frictionsPTFEsealingfinite element analysis

References

【1】
【1】
 
 
Crossref Google Scholar
Friction
Volume 7 Issue 3,
June 2019
Pages 268-281
DOI: 10.1007/s40544-018-0224-8

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Cite this Report
Close
Close
Cite this article:
BI Z, MUELLER DW. Friction predication on pin-to-plate interface of PTFE material and steel. Friction, 2019, 7(3): 268-281. https://doi.org/10.1007/s40544-018-0224-8

1455

Views

62

Downloads

23

Crossref

N/A

Web of Science

22

Scopus

3

CSCD
Received: 07 February 2018
Revised: 12 April 2018
Accepted: 26 May 2018
Published: 10 August 2018
© The author(s) 2018

This article is published with open access at Springerlink.com

Open Access: The articles published in this journal are distributed under the terms of the Creative Commons Attribution 4.0 International License (http:// creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.