AI Chat Paper
Note: Please note that the following content is generated by AMiner AI. SciOpen does not take any responsibility related to this content.
{{lang === 'zh_CN' ? '文章概述' : 'Summary'}}
{{lang === 'en_US' ? '中' : 'Eng'}}
Chat more with AI
Powered by AMiner. Clicking this button will take you away from SciOpen.
Home Friction Article
PDF (20.2 MB)
Cite
EndNote(RIS) BibTeX
Collect
Submit Manuscript AI Chat Paper
Show Outline
Outline
Show full outline
Hide outline
Outline
Show full outline
Hide outline
Research Article | Open Access

Effects of deep cryogenic treatment on mechanical and tribological properties of AISI D3 tool steel

Nay Win KHUN1, Erjia LIU1( ), Adrian Wei Yee TAN1, D. SENTHILKUMAR2, Bensely ALBERT3, D. MOHAN LAL4
School of Mechanical and Aerospace Engineering, Nanyang Technological University 50 Nanyang Avenue, Singapore 639798, Singapore
Department of Mechanical Engineering, P.A.College of Engineering and Technology, Pollachi 642002, TN, India
QuEST Global Services-NA, Inc., Greenville, SC 29615, USA
Department of Mechanical Engineering, College of Engineering, Guindy, Anna University Chennai 600025, India
Show Author Information

Abstract

In this study, the effects of deep cryogenic treatment (DCT) on the mechanical and tribological properties of AISI D3 tool steel were investigated together with a systematic correlation between their hardness and wear resistance. It was found that conventionally heat treated AISI D3 tool steel samples were significantly hardened via an additional DCT, which was attributed to the more retained austenite elimination, more homogenized carbide distribution and more reduction in carbide size in the samples. As a result, the hardened AISI D3 samples exhibited reductions in their friction and wear during rubbing against alumina and 100Cr6 steel balls under different normal loads due to the effectively hindered removal of surface materials. The results clearly showed that the DCT was an effective way to improve the mechanical and tribological properties of the AISI D3 tool steel samples as the tribological performance of the tool steel samples was significantly influenced by their hardness.

Keywords

AISI D3 tool steeldeep cryogenic treatmenthardnessfrictionwear

References

【1】
【1】
 
 
Crossref Google Scholar
Friction
Volume 3 Issue 3,
September 2015
Pages 234-242
DOI: 10.1007/s40544-015-0089-z

{{item.num}}

Comments on this article

Go to comment

< Back to all reports

Review Status: {{reviewData.commendedNum}} Commended , {{reviewData.revisionRequiredNum}} Revision Required , {{reviewData.notCommendedNum}} Not Commended Under Peer Review

Review Comment

Cite this Report
Close
Close
Cite this article:
KHUN NW, LIU E, TAN AWY, et al. Effects of deep cryogenic treatment on mechanical and tribological properties of AISI D3 tool steel. Friction, 2015, 3(3): 234-242. https://doi.org/10.1007/s40544-015-0089-z

1649

Views

99

Downloads

40

Crossref

N/A

Web of Science

41

Scopus

1

CSCD
Received: 14 June 2014
Revised: 18 May 2015
Accepted: 30 June 2015
Published: 05 August 2015
© The author(s) 2015

This article is published with open access at Springerlink.com

Open Access: This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.