References(39)
[1]
Cologna M, Rashkova B, Raj R. Flash sintering of nanograin zirconia in < 5 s at 850 ℃. J Am Ceram Soc 2010, 93: 3556-3559.
[2]
Cologna M, Prette ALG, Raj R. Flash-sintering of cubic yttria-stabilized zirconia at 750 ℃ for possible use in SOFC manufacturing. J Am Ceram Soc 2011, 94: 316-319.
[3]
Zhang YY, Jung JI, Luo J. Thermal runaway, flash sintering and asymmetrical microstructural development of ZnO and ZnO-Bi2O3 under direct currents. Acta Mater 2015, 94: 87-100.
[4]
Peng P, Deng YJ, Niu JP, et al. Fabrication and electrical characteristics of flash-sintered SiO2-doped ZnO-Bi2O3-MnO2 varistors. J Adv Ceram 2020, 9: 683-692.
[5]
M’Peko JC, Francis JSC, Raj R. Field-assisted sintering of undoped BaTiO3: Microstructure evolution and dielectric permittivity. J Eur Ceram Soc 2014, 34: 3655-3660.
[6]
Ren K, Huang SS, Cao YJ, et al. The densification behavior of flash sintered BaTiO3. Scripta Mater 2020, 186: 362-365.
[7]
Bichaud E, Chaix JM, Carry C, et al. Flash sintering incubation in Al2O3/TZP composites. J Eur Ceram Soc 2015, 35: 2587-2592.
[8]
Ojaimi CL, Ferreira JA, Chinelatto AL, et al. Microstructural analysis of ZrO2/Al2O3 composite: Flash and conventional sintering. Ceram Int 2020, 46: 2473-2480.
[9]
Xiao WW, Ni N, Fan XH, et al. Ambient flash sintering of reduced graphene oxide/zirconia composites: Role of reduced graphene oxide. J Mater Sci Technol 2021, 60: 70-76.
[10]
Muccillo R, Ferlauto AS, Muccillo ENS. Flash sintering samaria-doped ceria-carbon nanotube composites. Ceramics 2019, 2: 64-73.
[11]
Guan LL, Li J, Song XW, et al. Graphite assisted flash sintering of Sm2O3 doped CeO2 ceramics at the onset temperature of 25 ℃. Scripta Mater 2019, 159: 72-75.
[12]
Nie J, Zhang Y, Chan J M, et al. Water-assisted flash sintering: Flashing ZnO at room temperature to achieve ~ 98% density in seconds. Scripta Mater 2018, 142: 79-82.
[13]
Kermani M, Biesuz M, Dong J, et al. Flash cold sintering: Combining water and electricity. J Eur Ceram Soc 2020, 40: 6266-6271.
[14]
Li WG, Chen LY, Liu DG, et al. Ultra-low temperature reactive flash sintering synthesis of high-enthalpy and high-entropy Ca0.2Co0.2Ni0.2Cu0.2Zn0.2O oxide ceramics. Mater Lett 2021, 304: 130679.
[15]
Liu JM, Li X, Wang XL, et al. Alternating current field flash sintering 99% relative density ZnO ceramics at room temperature. Scripta Mater 2020, 176: 28-31.
[16]
Zhou HY, Li X, Zhu YC, et al. Review of flash sintering with strong electric field. High Volt 2022, 7: 1-11.
[17]
Wu AX, Zhu ZX, Wang XL, et al. High-performance ZnO varistor ceramics prepared by arc-induced flash sintering with low energy consumption at room temperature. High Volt 2022, 7: 222-232.
[18]
Liu JM, Huang RX, Zhang RB, et al. Mechanism of flash sintering with high electric field: In the view of electric discharge and breakdown. Scripta Mater 2020, 187: 93-96.
[19]
Raj R, Cologna M, Francis JSC. Influence of externally imposed and internally generated electrical fields on grain growth, diffusional creep, sintering and related phenomena in ceramics. J Am Ceram Soc 2011, 94: 1941-1965.
[20]
Su XH, Jiao ZH, Fu MY, et al. Ultrafast synthesis and densification of ZrO2 doped KNN ceramics by reactive flash sintering. Int J Appl Ceram Technol 2021, 18: 1999-2009.
[21]
Schmerbauch C, Gonzalez-Julian J, Röder R, et al. Flash sintering of nanocrystalline zinc oxide and its influence on microstructure and defect formation. J Am Ceram Soc 2014, 97: 1728-1735.
[22]
Lebrun JM, Hellberg CS, Jha SK, et al. In-situ measurements of lattice expansion related to defect generation during flash sintering. J Am Ceram Soc 2017, 100: 4965-4970.
[23]
Rheinheimer W, Phuah XL, Wang H, et al. The role of point defects and defect gradients in flash sintering of perovskite oxides. Acta Mater 2019, 165: 398-408.
[24]
Jongmanns M, Wolf DE. Element-specific displacements in defect-enriched TiO2: Indication of a flash sintering mechanism. J Am Ceram Soc 2020, 103: 589-596.
[25]
Rahaman MN. Ceramic Processing and Sintering, 2nd edn. Boca Raton, USA: CRC Press, 2003.
[26]
Francis JSC, Cologna M, Raj R. Particle size effects in flash sintering. J Eur Ceram Soc 2012, 32: 3129-3136.
[27]
Si MM, Hao JY, Zhao ED, et al. Preparation of zinc oxide/ poly-ether-ether-ketone (PEEK) composites via the cold sintering process. Acta Mater 2021, 215: 117036.
[28]
Rasaki SA, Xiong DY, Xiong SF, et al. Photopolymerization-based additive manufacturing of ceramics: A systematic review. J Adv Ceram 2021, 10: 442-471.
[29]
Guo J, Zhao XT, Herisson de Beauvoir T, et al. Recent progress in applications of the cold sintering process for ceramic-polymer composites. Adv Funct Mater 2018, 28: 1801724.
[30]
Koch SG, Lavrov EV, Weber J. Interplay between interstitial and substitutional hydrogen donors in ZnO. Phys Rev B 2014, 89: 235203.
[31]
Lee HW, Cho WJ. Effects of vacuum rapid thermal annealing on the electrical characteristics of amorphous indium gallium zinc oxide thin films. AIP Adv 2018, 8: 015007.
[32]
Peng Y, Wang Y, Chen QG, et al. Stable yellow ZnO mesocrystals with efficient visible-light photocatalytic activity. CrystEngComm 2014, 16: 7906-7913.
[33]
Zhao XT, Liao RJ, Liang NC, et al. Role of defects in determining the electrical properties of ZnO ceramics. J Appl Phys 2014, 116: 014103.
[34]
Gurylev V, Perng TP. Defect engineering of ZnO: Review on oxygen and zinc vacancies. J Eur Ceram Soc 2021, 41: 4977-4996.
[35]
Janotti A, van de Walle CG. Oxygen vacancies in ZnO. Appl Phys Lett 2005, 87: 122102.
[36]
Wang HX, Zhao PY, Chen LL, et al. Energy storage properties of 0.87BaTiO3-0.13Bi(Zn2/3(Nb0.85Ta0.15)1/3)O3 multilayer ceramic capacitors with thin dielectric layers. J Adv Ceram 2020, 9: 292-302.
[37]
Du B, Cai M, Wang X, et al. Enhanced electromagnetic wave absorption property of binary ZnO/NiCo2O4 composites. J Adv Ceram 2021, 10: 832-842.
[38]
Ye XY, Wei CG, Xue SK, et al. Atomistic observation of temperature-dependent defect evolution within sub-stoichiometric WO3-x catalysts. ACS Appl Mater Interfaces 2022, 14: 2194-2201.
[39]
Liu MH, Chen YW, Lin TS, et al. Defective mesocrystal ZnO-supported gold catalysts: Facilitating CO oxidation via vacancy defects in ZnO. ACS Catal 2018, 8: 6862-6869.