742
Views
108
Downloads
12
Crossref
12
WoS
13
Scopus
0
CSCD
A novel arsenic adsorbent with hydrous cerium oxides coated on glass fiber cloth (HCO/GFC) was synthesized. The HCO/GFC adsorbents were rolled into a cartridge for arsenic removal test. Due to the large pores between the glass fibers, the arsenic polluted water can flow through easily. The arsenic removal performance was evaluated by testing the equilibrium adsorption isotherm, adsorption kinetics, and packed-bed operation. The pH effects on arsenic removal were conducted. The test results show that HCO/GFC filter has high As(V) and As(III) removal capacity even at low equilibrium concentration. The more toxic As(III) in water can be easily removed within a wide range of solution pH without pre-treatment. Arsenic contaminated ground-water from Yangzong Lake (China) was used in the column test. At typical breakthrough conditions (the empty bed contact time, EBCT = 2 min), arsenic researched breakthrough at over 24,000 bed volumes (World Health Organization (WHO) suggested that the maximum contaminant level (MCL) for arsenic in drinking water is 10 mg/L). The Ce content in the treated water was lower than 5 ppb during the column test, which showed that cerium did not leach from the HCO/GFC material into the treated water. The relationship between dosage of adsorbents and the adsorption kinetic model was also clarified, which suggested that the pseudo second order model could fit the kinetic experimental data better when the adsorbent loading was relatively low, and the pseudo first order model could fit the kinetic experimental data better when the adsorbent loading amount was relatively high.
A novel arsenic adsorbent with hydrous cerium oxides coated on glass fiber cloth (HCO/GFC) was synthesized. The HCO/GFC adsorbents were rolled into a cartridge for arsenic removal test. Due to the large pores between the glass fibers, the arsenic polluted water can flow through easily. The arsenic removal performance was evaluated by testing the equilibrium adsorption isotherm, adsorption kinetics, and packed-bed operation. The pH effects on arsenic removal were conducted. The test results show that HCO/GFC filter has high As(V) and As(III) removal capacity even at low equilibrium concentration. The more toxic As(III) in water can be easily removed within a wide range of solution pH without pre-treatment. Arsenic contaminated ground-water from Yangzong Lake (China) was used in the column test. At typical breakthrough conditions (the empty bed contact time, EBCT = 2 min), arsenic researched breakthrough at over 24,000 bed volumes (World Health Organization (WHO) suggested that the maximum contaminant level (MCL) for arsenic in drinking water is 10 mg/L). The Ce content in the treated water was lower than 5 ppb during the column test, which showed that cerium did not leach from the HCO/GFC material into the treated water. The relationship between dosage of adsorbents and the adsorption kinetic model was also clarified, which suggested that the pseudo second order model could fit the kinetic experimental data better when the adsorbent loading was relatively low, and the pseudo first order model could fit the kinetic experimental data better when the adsorbent loading amount was relatively high.
This study was supported by the National Natural Science Foundation of China (Grant Nos. 51672283 and 51902271), the Fundamental Research Funds for the Central Universities (Grant Nos. A1920502051907-15, 2682020CX07, and 2682020CX08), Sichuan Science and Technology Program (Grant Nos. 2020YJ0259 and 2020YJ0072), Doctoral Research Start-up Fund of Hebei GEO University (Grant No. BQ2019003), Joint fund between Shenyang National Laboratory for Materials Science and State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals (Grant No. 18LHPY009), and Liaoning Baiqianwan Talents Program.
This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.
The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.
To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.